Aiphone IX-MV7-HB IP Video Master Station with 7" Touchscreen

Overview

The Aiphone IX-MV7-HB is a 7-inch LCD touchscreen IP video master station built for multi-unit residential, light commercial, and access control integrations where hands-free video calling and indoor monitoring need to live on a single wall-mounted or desk-mounted device. The IX-MV7-HB combines a built-in 1/3" CMOS 480p camera with SIP-based calling, PoE power delivery (802.3af, 4.32W draw), and a 500-entry station address book—making it a central hub rather than a point solution.

Key Features

• 7-inch LCD touchscreen: Large enough to see live video or station directories without squinting, but compact enough for apartment vestibules or common areas. The screen real estate matters when you're asking residents to read caller ID or accept a delivery.
• Built-in 480p camera with 5 lux minimum illumination: Offers usable low-light performance for indoor corridors or dimly lit lobbies without dedicated IR—5 lux is roughly equivalent to standard office lighting. Sufficient for liability-grade footage of who pressed the intercom button.
• SIP protocol support: Connects to standard SIP-based phone systems and VMS platforms via IPv4 or IPv6, avoiding vendor lock-in. Means the IX-MV7-HB can integrate into existing Asterisk, Freepbx, or enterprise telephony infrastructure without proprietary gateways.
• Dual communication modes—handset or hands-free: Full-duplex audio means two-way conversation at normal speaking volume. Handset option prevents audio feedback in lobbies with ambient noise; hands-free mode streamlines package acceptance or entry authorization without picking up a phone.
• 500-station address book with 8 speed-dial buttons: Pre-program frequent destinations (building manager, security office, maintenance) so no one is dialing from memory. The address book capacity accommodates small-to-mid-size multi-unit deployments (apartments 1–500) without overflow.
• 2 contact relay outputs and 4 trigger inputs: Relay outputs can trigger electric strikes, door releases, or alarm inputs. Trigger inputs accept door sensors, call buttons, or motion detectors—enabling event-driven calling or photo capture tied to external contacts.
• H.264/AVC and Motion JPEG video codecs: H.264 reduces bandwidth and storage requirements compared to MJPEG alone—meaningful if the IX-MV7-HB's video stream is also being recorded centrally. Codec flexibility lets you match the VMS or NVR's preferred compression.
• PoE power (IEEE 802.3af): 4.32W draw is well below the 13W 802.3af ceiling, so it won't stress your switch's power budget. One Cat-5e or Cat-6 cable supplies both data and power—no separate 24VAC transformer required.
• ONVIF Profile S compliance: Standard video-intercom integration point. Profile S support means basic interoperability with ONVIF-aware VMS platforms, though SIP is the primary calling protocol.
• Multi-angle mounting—desk stand (30°, 45°, 60°) or wall bracket: Desk stand adjustment lets you tilt the screen to avoid glare or improve sightlines. Wall mount with included bracket saves counter space in tight lobbies and positions the camera and speaker at a more natural eye/mouth level for conversation.

Integration & Compatibility

The IX-MV7-HB speaks SIP, so it pairs with any SIP-based PBX, VoIP platform, or intercom controller (Asterisk, Freepbx, 3CX, etc.). Audio codecs G.711 and G.722 are broadly supported in VoIP infrastructure. Network protocols (IPv4, IPv6, TCP, UDP, HTTP, HTTPS, RTSP, RTP, RTCP, SMTP, SFTP, DHCP, NTP, DNS) mean it fits standard enterprise IT environments. The 802.1X port security support allows integration into locked-down corporate networks that require credential-based port access.

Camera integration works via RTSP or ONVIF queries—the 480p H.264 stream can be ingested by compatible NVRs or VMS platforms. The station address book is local and programmable via web interface or phone UI; there is no cloud dependency for basic calling or routing.

Environmental and Operating Range

Rated for 32° to 104°F (0° to 40°C) operating temperature—adequate for climate-controlled interiors, lobbies, and protected vestibules. Not rated for outdoor exposure or below-freezing unheated spaces. UL 62368-1 (US and Canadian) compliance covers electrical safety and EMC.

What's in the Box

Based on available evidence, the IX-MV7-HB includes a multi-angled desk stand with 30°, 45°, and 60° tilt positions, and a wall-mount bracket with hardware. Exact accessory counts are not detailed in the available specifications; contact your supplier for a complete packing list if you need to verify cable lengths or mounting hardware before installation.

Frequently Asked Questions

Q: Is the IX-MV7-HB suitable for outdoor or unheated environments?

A: No. The operating temperature range is 32° to 104°F (0° to 40°C). The device is rated for climate-controlled interiors only. For outdoor lobbies or unheated vestibules, you'll need to explore weatherproof variants or external enclosures.

Q: Can the IX-MV7-HB integrate with my existing SIP phone system?

A: Yes. The IX-MV7-HB natively supports SIP protocol over IPv4 and IPv6. It is compatible with standard SIP PBX systems (Asterisk, Freepbx, 3CX, etc.) and VoIP infrastructures using G.711 or G.722 audio codecs. Configuration typically requires SIP registration details and network settings.

Q: How much power does the IX-MV7-HB draw, and do I need a separate power supply?

A: The unit draws 4.32W and is powered by standard PoE (IEEE 802.3af) via a single Cat-5e or Cat-6 cable. No separate 24VAC transformer or power injector is needed if your network switch has PoE ports available.

Q: What is the camera resolution and low-light performance?

A: The built-in camera is 1/3" CMOS at 480p resolution. Minimum illumination is 5 lux, which is roughly office-level ambient lighting. This provides usable footage in typical indoor corridors and lobbies without IR illumination, but is not sufficient for dark or unlit spaces.

Q: Can I use the relay outputs to trigger an electric door strike or alarm?

A: Yes. The IX-MV7-HB provides 2 contact relay outputs (typically rated for 12–24VDC or VAC loads). These can be programmed to activate on incoming calls, schedule-based events, or manual button press—allowing integration with electric strikes, door releases, or external alarms. Verify relay contact ratings and load specs with the integration team before wiring.

Q: Is the IX-MV7-HB compatible with Milestone XProtect or other major VMS platforms?

A: The IX-MV7-HB is ONVIF Profile S compliant and streams video via H.264/MJPEG codecs. Many enterprise VMS platforms (Milestone, Genetec, etc.) support ONVIF Profile S and can ingest the camera feed. However, the primary calling integration is via SIP, not native VMS plugins. Verify with your VMS vendor that ONVIF video ingestion is available for this device before deploying.

Ted Perry

The Aiphone IX-MV7-HB is purpose-built for multi-unit and light commercial sites that need centralized access-control calling without running separate devices for video, intercom, and door control. The 7-inch touchscreen is the unit's real strength—it keeps resident information (address book, call logs, visitor photos) immediately visible. The built-in 480p camera with 5 lux low-light performance is adequate for liability-grade corridor footage; it won't replace a dedicated surveillance dome, but it captures enough detail for "who rang the bell" and visitor identification in normal indoor lighting.

Technical Highlights:

• 4.32W PoE draw (IEEE 802.3af): This is a critical advantage for retrofit installations. Most existing PoE switches deliver 802.3af without upgrades, so the IX-MV7-HB can often replace older 24VAC intercom systems by simply running one Cat-5e/6 cable instead of separate 24VAC and data runs. No power injector required.
• SIP calling with 500-station address book: The address book capacity and SIP protocol mean you can integrate this into enterprise VoIP infrastructure without proprietary intercom controllers. 8 speed-dial buttons plus 500 programmable destinations handles most multi-unit residential and office-park deployments without overflow.
• 2 relay outputs and 4 trigger inputs: The IX-MV7-HB becomes a mini-controller, not just an endpoint. You can wire door sensors to the trigger inputs and have the unit automatically call a designated extension when someone enters; relay outputs can unlock doors, trigger alarms, or log events. This is where integrators earn margin—stacking logic on top of a simple video phone.
• H.264/MJPEG dual-codec support: H.264 compression cuts the video bitstream roughly in half compared to MJPEG, meaningful if the IX-MV7-HB's camera stream is being recorded centrally on an NVR. You can also fall back to MJPEG if your VMS or network bandwidth is constrained.

Deployment Considerations:

• 480p resolution is not HD: The IX-MV7-HB camera is 480p, not 1080p or higher. For facial recognition, license-plate capture, or detailed evidence footage, you will need external surveillance cameras. The built-in camera is best used for door-level presence and caller identity, not investigative-grade detail at distance.
• Operating temperature constraint: The unit is rated only for 0° to 40°C (32° to 104°F). Unheated vestibules, outdoor lobbies, or climate-failure scenarios require external weatherproof enclosures or seasonal shutdown. Plan cooling or heating infrastructure if the installation is in a marginal thermal zone.
• SIP integration is not automatic: Connecting the IX-MV7-HB to an existing PBX requires SIP registration parameters, extension routing, and audio-codec negotiation. It is not a plug-and-play intercom swap; expect pre-sales engineering and field configuration time. If the site is still running older PBX systems (non-SIP TDM), a SIP gateway or system replacement is required.

The IX-MV7-HB is the right choice for multi-unit residential sites, office parks, or light commercial facilities that are already invested in SIP/VoIP infrastructure and need a central video-phone hub with relay logic. It is not a replacement for enterprise video management or building-wide surveillance—it is a consolidation point for access-control calling and resident/visitor interaction. Size the address book, plan your SIP dial plan, and wire the relays for your door and alarm contacts before deployment.