Outdoor IP Cameras
Sub categories
Showing Results for Outdoor IP Cameras
-
i-PRO
SKU: PGYE1069ZAD1
i-PRO HDD Case - PGYE1069ZAD1
- OEM vibration-isolation mounts prevent RV-induced cascade failures in multi-drive arrays.
- Thermal design keeps the drive within its published operating temperature window.
- Direct factory replacement maintains the appliance's acoustic and hot-swap tray compatibility.
$39.00 $38.99 Save $0.01The item has been added -
i-PRO
SKU: IN100-CLX33134-MC1
I-Pro IN100-CLX33134-Bipsb-Nzd-626-Ctsd - IN100-CLX33134-MC1
- OEM-sourced component ensures exact mechanical and electrical fit for IN100-CLX33134 systems.
- Drop-in installation follows i-PRO standard procedures, reducing commissioning labor on-site.
- Factory-new construction with manufacturer warranty protects the installation investment long-term.
$2,010.00 $1,155.99 Save $854.01The item has been added -
i-PRO
SKU: WVCF354
i-PRO Indoor Fixed Analog Dome Camera With 650 - WVCF354
- 650 TVL resolution delivers clear monochrome or color output on existing CCTV runs.
- BNC composite output integrates directly with legacy DVRs and analog matrix switchers.
- Supports cable runs up to 300 ft on RG-59 coax without a distribution amplifier.
$360.00 $282.99 Save $77.01The item has been added -
i-PRO
SKU: PWRSWT-S4128T-ON
I-Pro Ips-Utys-Ude-180TB - PWRSWT-S4128T-ON
- 28-port managed PoE switch scales multi-camera deployments without added failure points.
- VLAN and QoS support isolates camera traffic and prioritizes video streams network-wide.
- NDAA-compliant and rack-mountable; integrates directly into i-PRO IPS-UTYS/UDE rack systems.
$25,500.00 $24,101.99 Save $1,398.01The item has been added -
i-PRO
SKU: IPS-LIS-1-4TB
I-pro Legacy Interface Server Unit Includes 1X - IPS-LIS-1-4TB
- 4 TB of onboard storage keeps moderate legacy archives accessible during migration.
- Bridges older i-PRO/Panasonic recording systems to the current evidence-management platform.
- Rack-mount appliance form factor integrates cleanly into existing IT infrastructure.
$3,011.36 $2,082.99 Save $928.37The item has been added -
i-PRO
SKU: PML4386
i-PRO Leica Type Zoom Video Adapter F=43-86MM - PML4386
- Leica-type mount enables integration of premium glass into i-PRO camera platforms.
- 43–86mm zoom range supports flexible framing from standard to moderate telephoto.
- Parfocal mechanical construction maintains focus integrity throughout zoom adjustments.
$4,595.00 $3,493.99 Save $1,101.01The item has been added -
i-PRO
SKU: STL2
i-PRO Lenovo ST250 Tower Chassis (do NOT Sell Standalone. - STL2
- Factory-validated for i-PRO recorder software, eliminating field compatibility issues.
- Lenovo ST250 tower chassis is thermal-rated for 24/7 continuous surveillance recording duty.
- Standardized platform simplifies multi-site rollouts and consolidates warranty management.
In stock · Ships same business day$5,672.99 -
i-PRO
SKU: WVLZ62/8S
i-PRO Lens 1/3 Variable Focal Length Zoom - WVLZ62/8S
- 1/3-inch CCD variable focal length zoom lens
- Manual zoom and focus for precise install framing
- CS-mount interface for standard camera body integration
$288.00 $226.99 Save $61.01The item has been added -
i-PRO
SKU: PARI-3179
i-PRO Lind Universal Radar Interface - PARI-3179
- Bridges radar sensors to i-PRO PTZ cameras for automated slew-to-cue without custom scripting.
- Supports multiple simultaneous radar inputs to coordinate full perimeter coverage from one device.
- Configurable detection filtering reduces nuisance alarms, keeping operator attention on real threats.
$65.00 $55.99 Save $9.01The item has been added -
i-PRO
SKU: BEZEL-SRL2-3
i-PRO Locking Front Bezel SR650 - BEZEL-SRL2-3
- Locking bezel requires tools for removal, deterring tampering on SR650 multi-sensor cameras.
- Powder-coated stamped steel/aluminum construction withstands exterior environmental exposure.
- Field-installable on existing SR650 deployments without compromising optical performance.
$59.00 $39.99 Save $19.01The item has been added -
i-PRO
SKU: M-44-V-V3
i-PRO M-44-V-V3 Advidia 4MP 2688x1520 Turret Camera.
4MP turret with motorized zoom and 40m IR for indoor/outdoor surveillance
- Motorized 2.8–12mm varifocal lens enables remote reframing across 4.3× zoom without site visits.
- IP67/IK10 housing with –30° to 60°C rating suits harsh outdoor and vandal-prone deployments.
- 120 dB WDR and 40m IR at 850nm maintain usable 4MP imagery in backlit or zero-lux conditions.
$408.00 $280.99 Save $127.01The item has been added -
i-PRO
SKU: M-49-V-V2
i-PRO M-49-V-V2 4MP Motorized Varifocal Bullet Camera
4MP outdoor bullet with motorized 2.8–12mm zoom and 40m IR
- Motorized varifocal lens adjusts remotely 2.8–12mm (4.3× zoom) via VMS
- 4MP resolution at 30 fps with 120dB WDR and H.265 compression
- 40m IR night vision, IP67 rated, PoE powered, ONVIF compatible
$403.34 $277.99 Save $125.35The item has been added -
i-PRO
SKU: M-FM
i-PRO M-FM Flush Mount for M-87-V Dome Camera
Flush ceiling mount for i-PRO M-87-V dome cameras, 195mm cutout
- Sheet metal and ABS construction rated IK10 for durable indoor mounting
- 195mm ceiling hole diameter fits standard drop-ceiling installations
- Lightweight 1.08 lbs design simplifies single-person installation
$56.90 $38.99 Save $17.91The item has been added -
i-PRO
SKU: MC-20NKS
I-Pro Mc-20NKS Reader: HID Multi Class Signo Reader W/Bluetooth
- Reads HID Prox, iCLASS SE/SR, and Seos from one head — no dual-reader installs.
- Integrated BLE enables smartphone-based mobile credentials without hardware changes.
- Standard Wiegand output integrates directly with existing access panels and controllers.
$440.68 $319.99 Save $120.69The item has been added -
i-PRO
SKU: MC-8543
i-PRO MC-8543 DESFire EV3 Cards - 4K - ISO - ISO glossy white
- AES-128 mutual authentication resists cloning and replay attacks on access control.
- Multi-application file system consolidates access, payment, and attendance on one card.
- ISO ID-1 form factor at 13.56 MHz drops into existing DESFire EV1/EV2 reader installs.
$11.59 $7.99 Save $3.60The item has been added -
i-PRO
SKU: MC-BT126
i-PRO MC-BT126 Inaltronix BT126
- 12VDC regulated power supply for i-PRO cameras
- DIN-rail mount for clean equipment enclosure install
- 150W at 6A output for multi-camera powering
$48.17 $33.99 Save $14.18The item has been added
Outdoor IP Cameras
Outdoor IP cameras are designed for perimeter monitoring and exposed environments where weather resistance, durability, and low-light performance matter. Choose cameras built for reliable operation across temperature swings, precipitation, and challenging lighting conditions.
Plan Your Deployment
- Ingress protection (IP) rating and vandal resistance needs
- Operating temperature range and environmental exposure
- Night performance, IR range, and WDR for backlighting
- Lens selection for distance coverage and identification zones
- PoE power and surge protection planning
Outdoor IP Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 1080 working models of outdoor ip cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, 8MP, 5MP, Thermal, 6MP, 12MP, 20MP+ |
| IP Rating | IP66, IP67, IK10, IP42, IP52, NEMA 4X, IP68, IPX4 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, AC/DC, PoE++, PoE+/12VDC |
| Channels | 6, 20, 4, 2 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.
Build a Complete System
Most outdoor ip cameras installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.
