Outdoor IP Cameras
Sub categories
Showing Results for Outdoor IP Cameras
-
i-PRO
SKU: MC-921NTNTEK
I-Pro 921ntntek00000; Rdr RK40 Iclass Se Rev E - Mc-921NTNTEK
- Installs directly into RK40 internal card bus—no external power or wiring needed.
- HID iClass SE encryption blocks credential cloning, cutting lost-card replacement costs.
- Supports simultaneous PIN and biometric on the same panel for multi-factor policies.
$856.49 $525.99 Save $330.50 -
i-PRO
SKU: A-37-FW
i-PRO A-37-FW 2MP Vandal IR Dome Camera
- IK10/IP67-rated housing survives 5 kg impacts and full dust/water immersion.
- 144 dB WDR with H.265 Smart Coding delivers forensic detail in high-contrast scenes.
- On-board i-VMD and auto-tracking run edge analytics without backend server dependency.
$375.00 $294.99 Save $80.01 -
i-PRO
SKU: A-45-F
i-PRO A-45-F 2MP Mini Vandal Outdoor Camera
- 144dB Super Dynamic WDR handles mixed backlit/shadowed scenes without image washout.
- 70m IR range enables 24/7 coverage in zero-lux environments with no external lighting.
- 2.9–9mm varifocal lens adjusts on-site to match scene depth without swapping optics.
$400.00 $314.99 Save $85.01 -
i-PRO
SKU: A-45-F-2.8
i-PRO A-45-F-2.8 2MP Mini Vandal IP67 Camera
- Motorized 2.9–9mm varifocal lens allows remote FOV adjustment without repositioning.
- IP67-rated vandal-resistant housing handles outdoor and high-abuse deployments directly.
- IR LEDs illuminate to 70m (30 IRE) and 144dB WDR resolves high-contrast scenes clearly.
$400.00 $314.99 Save $85.01 -
i-PRO
SKU: A-46-F
i-PRO A-46-F 4MP Indoor/Outdoor Vandal Dome Camera
- 4MP 2688×1520 resolution with 120dB WDR captures evidence-grade detail in high-contrast scenes.
- IP67/IK10 rated dome survives direct impacts and full weather exposure from -40°C to 60°C.
- 802.3af PoE (13W draw) and ONVIF S/T/G compliance integrate into existing switch and VMS infrastructure.
$375.00 $294.99 Save $80.01 -
i-PRO
SKU: A-47-2.8
i-PRO A-47-2.8 5MP Vandal Proof Outdoor Dome Camera
- IK10/IP66-rated housing survives direct impact and full weather exposure from -40°C to +60°C.
- 10x optical zoom with 132 dB WDR captures evidentiary detail at distance in high-contrast scenes.
- Edge AI detects faces, vehicles, and occupancy over PoE++ on a single cable—no server required.
$439.00 $345.99 Save $93.01 -
i-PRO
SKU: A-47-F
i-PRO A-47-F 5MP Mini Vandal Proof IP Camera
- 5MP with 10x optical zoom (4.7–47mm) delivers sharp detail across wide focal ranges.
- IK10 impact resistance and IP66 sealing handle vandalism and harsh outdoor conditions.
- PoE+ (802.3at) and ONVIF compliance simplify single-cable deployment with any VMS.
$400.00 $314.99 Save $85.01 -
i-PRO
SKU: A-47-F-2.8
i-PRO A-47-F-2.8 5MP Mini Vandal Proof IP Camera
- 10x optical zoom (4.7–47 mm) covers wide situational and close facial detail from one unit.
- IK10 impact + IP66 sealing withstand physical assault and high-pressure wash-downs.
- 132 dB Super Dynamic WDR plus 0.007 lx color sensitivity handles extreme mixed lighting.
$400.00 $314.99 Save $85.01 -
i-PRO
SKU: A-475-P
i-PRO A-475-P 4MP PTZ Camera with IR & 4X Optical Zoom
- 4MP (2688×1520) with 4X optical zoom enables forensic-grade ID at 40–60 ft.
- PoE 802.3af at 13W runs on a single Ethernet cable—no separate power supply needed.
- ONVIF Profile S ensures compatibility with Milestone, Genetec, and i-PRO NVR systems.
$495.00 $389.99 Save $105.01 -
i-PRO
SKU: MC-PIM400-485-RSI
i-PRO Allegion Model PIM400-485-RSI; Panel - MC-PIM400-485-RSI
- RS-485 hardware interface directly bridges i-PRO cameras/recorders to Allegion panels.
- Eliminates middleware and license stacking required by software-based integration workarounds.
- Enables event-driven recording triggered by access control activity at the panel level.
$2,166.72 $1,489.99 Save $676.73 -
i-PRO
SKU: MC-BL3
i-PRO Altronix BL3 Battery Leads 18 Inch 18AWG Pair RED - MC-BL3
- Pre-terminated 18-inch leads eliminate field stripping and reduce wiring errors.
- 18AWG conductors handle current demands of 12V/24V sealed lead-acid batteries.
- Red jacket enables instant polarity identification during install and maintenance.
$4.69 $3.99 Save $0.70 -
i-PRO
SKU: MC-T2MK77F16MC
i-PRO Altronix T2MK77F16 KIT Consists OF TROVE2 - MC-T2MK77F16MC
- Delivers 24 VDC output sized for door readers, EM locks, and solenoids.
- Integrates power and control functions into a single TROVE2-compatible kit.
- Consolidates protected power management across multiple access control zones.
$2,290.60 $1,575.99 Save $714.61 -
i-PRO
SKU: MC-T2MK7F8MC
i-PRO Altronix T2MK7F8 KIT Consists OF TROVE2 - MC-T2MK7F8MC
- Pre-bundled TROVE2 kit with EFLOW104NB, ACM8, VR6, and PDS8 guarantees component compatibility.
- Rack-mount form factor with CAM-LOCK hardware simplifies panel or rack installation.
- PoE 802.3af support enables camera and device powering over existing network cabling.
$1,615.78 $1,111.99 Save $503.79 -
i-PRO
SKU: MC-T3MK77F16SMC
i-PRO Altronix T3MK77F16 KIT Consists OF - MC-T3MK77F16SMC
- Single SKU bundles Altronix power and mounting components for T3MK77F16 deployments.
- Pre-matched components eliminate compatibility risk across multi-camera i-PRO installations.
- Reduces procurement cycles and on-site delays by consolidating verified component sets.
$3,849.91 $2,647.99 Save $1,201.92 -
i-PRO
SKU: WVCP620
i-PRO Analog BOX Super Dynamic 6 Day/night Fixed - WVCP620
- Super Dynamic 6 WDR handles high-contrast scenes like backlit entryways.
- CS-mount lens compatibility lets you tailor field of view to each scene.
- Coax output integrates directly into existing analog DVR infrastructure.
$536.00 $421.99 Save $114.01 -
i-PRO
SKU: WV-QAT501-W
i-PRO Attachment Pipe FOR Connecting Outdoor PTZ - WV-QAT501-W
- Aluminum alloy construction resists deflection under PTZ pan-tilt loads.
- Rated –50°C to +60°C, supporting reliable outdoor deployment in extreme climates.
- ø58 mm × 85 mm pendant pipe bridges PTZ camera body to locally sourced brackets.
$96.32 $66.99 Save $29.33
Outdoor IP Cameras
Outdoor IP cameras are designed for perimeter monitoring and exposed environments where weather resistance, durability, and low-light performance matter. Choose cameras built for reliable operation across temperature swings, precipitation, and challenging lighting conditions.
Plan Your Deployment
- Ingress protection (IP) rating and vandal resistance needs
- Operating temperature range and environmental exposure
- Night performance, IR range, and WDR for backlighting
- Lens selection for distance coverage and identification zones
- PoE power and surge protection planning
Outdoor IP Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 1080 working models of outdoor ip cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, 8MP, 5MP, Thermal, 6MP, 12MP, 20MP+ |
| IP Rating | IP66, IP67, IK10, IP42, IP52, NEMA 4X, IP68, IPX4 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, AC/DC, PoE++, PoE+/12VDC |
| Channels | 6, 20, 4, 2 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.
Build a Complete System
Most outdoor ip cameras installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.














