i-PRO A-47-F-2.8 5MP Mini Vandal Proof IP Camera

i-PRO A-47-F-2.8 5MP Mini Vandal-Proof PTZ IP Camera

Overview

The i-PRO A-47-F-2.8 is a compact 5MP PTZ camera engineered for high-security environments where physical durability and extreme low-light performance cannot be compromised. The motorized 4.7–47 mm lens (10x optical zoom) eliminates the need for multiple fixed optics—zoom between wide situational awareness and tight facial or license-plate detail from a single device. IK10 rating (highest impact classification) and IP66 environmental sealing withstand physical assault and spray-down without image degradation. Deploy this in retail banking halls, transit stations, and critical infrastructure where a discreet ceiling or rack mount is required and traditional turret cameras would be too visible.

Ultra-sensitive 0.007 lx color imaging at F1.6 (with frame integration) delivers usable detail in near-darkness without requiring external lighting—a genuine advantage when ambient control is not an option. Super Dynamic range (132 dB maximum) handles brutal mixed lighting (sunlit entrance + dim interior) without halo artifacts that degrade motion analytics. H.265 compression cuts bandwidth roughly 40–50% compared to H.264, material savings across dozens of cameras on bandwidth-constrained networks. ONVIF Profile G/M/S/T ensures plug-and-play integration into Milestone, Genetec, and open VMS platforms.

Compatibility

The A-47-F-2.8 is a standalone network IP camera compatible with any ONVIF-capable VMS supporting Profile G, M, S, or T—including Milestone Interconnect, Genetec Omnicast, Axis Camera Station, and Linux/Windows platforms with standard ONVIF support. Requires PoE+ (802.3at) infrastructure; verify your switch delivers minimum 13W per port to handle maximum draw during zoom. Built-in FIPS 140-2 Level 3 SecureElement (NXP EdgeLock SE050F) enforces tamper-resistant firmware signing and secure boot—no additional security appliance needed for federal or critical-infrastructure deployments. NDAA-compliant manufacturing eliminates supply-chain risk for government and defense procurement.

Installation Notes

Ceiling or rack mounting are the two primary installation orientations; verify mounting surface can support the compact mini form factor without obstructing pan/tilt sweep. PoE+ power draw is 13W nominal (up to 15W at full zoom with heater/wiper active); confirm your PoE switch has sufficient budget per port. Operating range is –30 °C to +55 °C (–22 °F to +131 °F); suitable for indoor climate-controlled environments and sealed outdoor enclosures but not direct outdoor exposure without additional IP67 housing. Audio input and VMD (Video Motion Detection with 4 configurable zones) are configurable in the VMS—set motion detection regions to reduce false alarms in high-traffic areas.