i-PRO Attachment Pipe FOR Connecting Outdoor PTZ - WV-QAT501-W

i-PRO WV-QAT501-W Pendant Mount Attachment Pipe

Overview

The WV-QAT501-W is an aluminum alloy mounting attachment pipe designed to couple i-PRO outdoor PTZ camera bodies to locally procured bracket hardware. It solves a specific installation constraint: when your ceiling or soffit cannot accommodate direct camera mounting, this pendant-style pipe bridges the gap between the camera and a custom or standard mount bracket. The pipe measures ø58 mm × 85 mm (H) and weighs approximately 200 g (0.44 lbs) — light enough to minimize fastener load yet rigid enough to handle PTZ pan-tilt motion without deflection. Finished in i-PRO white for visual integration with outdoor camera housings.

Compatibility

The WV-QAT501-W is engineered specifically for i-PRO outdoor PTZ camera families. It serves as the intermediate mechanical coupler between your PTZ camera body and a locally sourced mounting bracket, following the camera manufacturer's installation guide. The pendant design is mandatory for correct function — the pipe must hang vertically from ceiling or overhead fastening points. Mounting at a slant or on a horizontal surface will compromise optical alignment and shorten component life. Confirm your bracket design will not interfere with the camera's pan-tilt range or field of view before final installation.

Installation Notes

Secure, vertical mounting is non-negotiable. i-PRO specifies that improper installation can result in injury or property damage. The attachment pipe must be fastened to your mount bracket using the included M6 hexagon screws according to the camera's installation documentation. Operating temperature range is –50 °C to +60 °C (–58 °F to +140 °F), suitable for temperate to subarctic outdoor deployments. Before connecting, confirm that no locally procured bracket component will obstruct the camera's normal operation. Once the camera is decommissioned, remove the attachment pipe to prevent environmental degradation.

What's in the Box

• 1× Attachment pipe (ø58 mm × 85 mm, aluminum alloy, i-PRO white finish)
• 5× Camera mounting screws (M6 hexagon; 1 spare included)
• 1× Operating Instructions
• 1× Installation Instructions