Multi-Sensor IP Cameras

Plan Your Deployment

Coverage design and blind-spot reduction objectives
Mounting height and viewing angle alignment
Bandwidth and bitrate planning for multi-imager streams
Retention impact when multiple streams are recorded
PoE budget requirements (often higher draw than single cameras)

Showing Results for Multi-Sensor IP Cameras

Compare

Out of stock
Hanwha

SKU: PNM-A13022RV

Hanwha PNM-A13022RV 13MP Panoramic Multi-Sensor Dome

13MP panoramic dome with 194° view, IR night vision, IP66 outdoor rated
- 13MP stitched panoramic at 30 fps with 120dB WDR for mixed lighting
- 194° horizontal × 93° vertical coverage eliminates multi-camera blind spots
- Built-in 5m IR, PoE+ power, IP66/IK10 rated -40°C to +55°C operation
Special Order · Ships in 2-3 weeks

$2,700.00 $1,810.99 Save $889.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C12083RVD/KEX

Hanwha PNM-C12083RVD/KEX 6MP Dual-Sensor AI Dome

Dual 6MP AI dome with IR night vision and enterprise security for outdoor surveillance
- Dual 6MP sensors with AI analytics for simultaneous multi-directional monitoring
- IR illumination up to 1.5m range plus PoE+ power in single wired connection
- TPM 2.0, FIPS 140-2 Level 2, AES-256 encryption with IP66/IK10 weather resistance
Special Order · Ships in 2-3 weeks

$2,050.00 $1,374.99 Save $675.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C16013RVQB

Hanwha PNM-C16013RVQB 4MP Vandal Dome Camera

4MP vandal dome with IK09 hard-coated dome and 20m IR for outdoor
- Four independent 4MP channels at 15 fps each for simultaneous multi-angle coverage
- IK09 impact rating and IP66 sealing withstand vandalism and harsh weather
- H.265 compression with 120dB WDR balances bandwidth and high-contrast scene detail
Special Order · Ships in 2-3 weeks

$1,900.00 $1,610.99 Save $289.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: PNM-C16083RVQ

Hanwha PNM-C16083RVQ 16MP 4-Sensor Outdoor AI PTZ Camera

Quad 4MP sensors with 360° pan/tilt and AI license plate detection
- Four independent 4MP streams capture all cardinal directions simultaneously
- 3.3–5.7mm motorized zoom and 360° pan for detail shots without repositioning
- On-camera AI detects vehicles, license plates, and faces; 15m IR at 0.0075 lux
In stock · Ships same business day

$2,850.00 $2,134.99 Save $715.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C16083RVQ/KEX

Hanwha PNM-C16083RVQ/KEX 4MP Multi-Sensor Outdoor Dome

4MP multi-sensor outdoor dome, IP66/IK10, motorized varifocal lens
- Four 4MP channels simultaneously with 120dB WDR for backlit/shadow detail
- Motorized varifocal lens allows remote field-of-view adjustment post-install
- IR night vision to 1.3m + IP66 weather seal + IK10 impact resistance
Special Order · Ships in 2-3 weeks

$2,850.00 $1,911.99 Save $938.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: PNM-C20000QB

Hanwha PNM-C20000QB 4CH 2MP Network Remote Head Camera

4-channel 2MP remote head camera with H.265 and people counting
- 4 x 2MP @ 30fps per channel with H.265, H.264, MJPEG codec options
- WDR and day/night for 24/7 operation across high-contrast environments
- PoE+ powered, ONVIF compatible, Wi-Fi and Ethernet connectivity options
In stock · Ships same business day

$1,300.00 $973.99 Save $326.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C32083RQZ/KEX

Hanwha PNM-C32083RQZ/KEX 8MP Vandal Dome Camera

8MP quad-channel vandal dome with 1.3m IR and IK10 rating for harsh outdoor sites
- Four 8MP streams simultaneously with motorized 4.38–9.33mm varifocal lens and 120dB WDR
- IK10 anti-vandal, IP66 waterproof, NEMA 4X corrosion protection for extreme weather deployment
- 1.3m infrared illumination for complete 24/7 night vision without auxiliary lighting
Special Order · Ships in 2-3 weeks

$3,900.00 $2,615.99 Save $1,284.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: PNM-C32083RVQ

Hanwha PNM-C32083RVQ 32MP 4x8MP Multi-Sensor Outdoor AI Camera

32MP multi-sensor outdoor PTZ with AI analytics and 360° coverage
- Four 8MP sensors (3840×2160 each) capture 360° simultaneously, not sequentially
- 1.7x motorized varifocal (3.3–5.7mm) with F1.5 aperture for low-light clarity
- 120dB WDR and native AI object/facial detection run on-camera without NVR load
In stock · Ships same business day

$3,200.00 $2,396.99 Save $803.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C32083RVQ/KEX

Hanwha PNM-C32083RVQ/KEX 8MP Multi-Sensor Vandal Dome

4-channel 8MP vandal dome with 120dB WDR and 1.3m IR for outdoor sites
- Four simultaneous 8MP streams from one dome; 3.3–5.7mm motorized zoom covers 109° to 56° FOV
- 120dB WDR handles mixed light; integrated IR illumination works in total darkness
- IK10 impact-rated, IP66 sealed; H.265 compression with PoE++ reduces bandwidth and storage
Special Order · Ships in 2-3 weeks

$3,200.00 $2,145.99 Save $1,054.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: PNM-C34404RQPZ

Hanwha PNM-C34404RQPZ 34MP Outdoor AI PTZ Camera

34MP outdoor PTZ with 40x zoom and AI recognition at 200m range
- 34MP resolution + 40x optical zoom identifies faces at 234m, vehicles at 468m
- 360° endless pan, 110° tilt, 700°/sec speed with 300 presets ±0.1° accuracy
- 200m IR range, 0Lux night vision, IP66/IK10 rated for outdoor all-weather use
In stock · Ships same business day

$7,600.00 $5,692.99 Save $1,907.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C34404RQPZ/KUS

Hanwha PNM-C34404RQPZ/KUS 8MP Vandal PTZ Camera

Quad 8MP fixed + PTZ in one IK10 vandal unit for perimeter surveillance
- Four 8MP channels at 5fps plus dedicated PTZ for wide-area and zoom coverage
- IP66 weatherproof, IK10 vandal-rated housing with 1.3m IR for 24/7 operation
- H.265/H.264/MJPEG codec support with WDR and LPR analytics, PoE++ powered
Special Order · Ships in 2-3 weeks

$7,600.00 $5,096.99 Save $2,503.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: PNM-C7083RVD

Hanwha PNM-C7083RVD 4MP 2x2MP IR Outdoor Motorized Varifocal Dome IP Camera

Dual 2MP outdoor dome with 2x motorized zoom and 30m IR range
- Each sensor captures 1920x1080 @ 30fps with 3–6mm varifocal lens
- IR illumination reaches 25m; 120dB extreme WDR handles backlit scenes
- IP66/NEMA4X rated dome withstands rain, dust, and extreme outdoor use
In stock · Ships same business day

$1,750.00 $1,310.99 Save $439.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C7083RVD/KEX

Hanwha PNM-C7083RVD/KEX 2MP AI Dome Camera

Dual 2MP AI dome with IR and PoE+ for outdoor multi-directional surveillance
- Dual 2MP sensors with onboard AI analytics including License Plate Recognition
- IR illumination for complete darkness plus motorized varifocal zoom/focus
- IP66/IK10 rated, PoE+ powered, TPM 2.0 with FIPS 140-2 Level 2 encryption
Special Order · Ships in 2-3 weeks

$1,750.00 $1,173.99 Save $576.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: PNM-C9022RV/KEX

Hanwha PNM-C9022RV 8MP Panoramic Camera

8MP panoramic multi-sensor camera with 5m IR and IK10 vandal rating
- 8MP panoramic stitching with H.265 compression for extended wide-area coverage
- 5-meter IR night vision and Day/Night ICR switching for 24/7 operation
- IP66 and IK10 rated for outdoor and high-impact environments, PoE+ powered
Special Order · Ships in 2-3 weeks

$2,050.00 $1,374.99 Save $675.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: TNM-C2712TDR

Hanwha TNM-C2712TDR Bi-Spectrum Fire Detection Camera

Dual-sensor fire detection with 3MP visible + 160×120 thermal to 450°C
- 3MP visible + thermal imaging with flame detection and temperature profiling
- -10°C to 450°C radiometric measurement spans equipment faults to active fire
- H.265 compression and PoE 802.3af power via single network cable
Special Order · Ships in 2-3 weeks

$2,300.00 $1,542.99 Save $757.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: TNM-C2722TDR

Hanwha TNM-C2722TDR Bi-Spectrum Fire Detection Camera

Dual thermal + 4MP visible sensor for flame and heat detection
- Thermal range -10°C to 450°C with radiometric measurement across two ROIs
- 4MP visible sensor with AI flame detection and H.265 compression
- PoE (802.3af) powered fixed dual-lens design for wide-area monitoring
Special Order · Ships in 2-3 weeks

$2,550.00 $1,709.99 Save $840.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Network Bandwidth & Storage Impact

Multi-sensor cameras stream from 2–4 imagers simultaneously, multiplying your bitrate demands. Plan for NVR throughput limits and validate that your switch fabric and storage can sustain concurrent recording from all sensors before deploying at scale.

PoE Power Budget & Infrastructure

Dual and quad-sensor cameras consume 15–60W depending on model, cooling, and lens type. High-density deployments can exhaust standard PoE budgets; see PoE budget planning and validate your switch capacity to avoid brownouts.

Sensor Resolution & Pixel Density Trade-offs

More sensors doesn't guarantee better identification. Weigh total megapixel output against DORI and pixel-density requirements for your use case—4× 2MP sensors differ significantly from 2× 4MP in terms of coverage quality and distant-object detail.

Installation & Cabling Complexity

While multi-sensor cameras reduce the number of physical mounts, they increase per-camera cable load and require careful management of multiple video streams. Plan for proper strain relief and network core redundancy to avoid bottlenecks at aggregation points.

Synchronization & Stitching Requirements

Some multi-sensor designs require firmware-level or NVR-level synchronization to create seamless panoramic views. Verify compatibility between camera firmware, NVR software, and any third-party stitching tools before committing to a brand ecosystem.

Brand Ecosystem & Firmware Support

Leading manufacturers like Axis, Hikvision, i-PRO, and Hanwha offer multi-sensor models with varying levels of NVR integration and analytics support. Confirm long-term firmware roadmaps and interoperability before standardizing on a single vendor.

Technology Stack

The specs and acronyms that actually affect multi-sensor ip cameras performance.

Sensor Count & Imager Arrangement

Multi-sensor cameras house 2, 4, or more independent image sensors, each with its own lens and processing pipeline. Dual-sensor models typically provide 180° coverage, while quad-sensor designs achieve 360° or offer overlapping perspectives for better coverage validation and incident review.

Synchronized Video Streams

Each imager in a multi-sensor camera streams independently, synchronized at the hardware or firmware level to prevent frame-rate drift. Proper synchronization is critical for panoramic stitching, forensic review, and analytics that depend on consistent timeline correlation across all sensor feeds.

Bitrate & Codec Selection

Multi-sensor cameras typically support H.264 or H.265 encoding per imager, with cumulative bitrates of 8–40 Mbps depending on resolution, frame rate, and compression. Plan storage and retention around the combined bitrate of all sensors active simultaneously.

Field of View (FOV) & Coverage Overlap

Panoramic multi-sensor designs spec FOV angles (e.g., 180° or 270°) and define overlapping edge zones where adjacent imagers see the same scene. Minimal overlap reduces redundancy; excessive overlap wastes bandwidth but improves failure tolerance and perspective verification.

PoE++ & High-Power Delivery

Quad-sensor cameras and models with active cooling often require PoE++ (Type 3 / 60W) or PoE+++ (90W+) power budgets. Confirm your switch supports the required power class and that branch circuits can sustain peak demand, especially in larger multi-camera installations.

Panoramic Video Stitching & Dewarping

Some multi-sensor cameras embed stitching firmware that blends adjacent sensor streams into a single panoramic view; others leave stitching to the NVR or third-party software. Verify codec compatibility, processing load, and alignment accuracy if panoramic output is a deployment requirement.

Typical Deployment Scenarios

Large Warehouse Monitoring (30,000 sq ft)

Deploy 6–8 dual-sensor panoramic cameras on ceiling mounts across the space, each covering 180° to eliminate blind spots in aisles and storage zones. Total stream load: ~120 Mbps. Requires managed PoE+ or PoE++ switch (48–96W per camera class) and NVR with 1–2 TB/day storage throughput. Use Hikvision or Axis models for proven integration.

Retail Store Front & Perimeter (10,000 sq ft)

Place 2–3 quad-sensor cameras at store corners to achieve 360° coverage of sales floor and exterior. Add 2–3 single-sensor cameras for entry/exit detail capture. Total system: ~80 Mbps, 500 GB/day storage. i-PRO thermal-fusion models work well for perimeter intrusion detection after-hours.

School Cafeteria & Commons Area (6,000 sq ft)

Install 2 dual-sensor panoramic cameras mounted on opposite walls to cover the entire space with 270° combined coverage, eliminating corner and under-table blind spots. Bitrate: ~30 Mbps. See school surveillance design best practices. Integrate with Hanwha or Vivotek NVR for K–12 compliance.

Parking Structure or Garage (2-Level, 8,000 sq ft per level)

Use 8–10 quad-sensor cameras (one per ~1,000 sq ft) to provide 360° or multi-directional coverage without PTZ, reducing wiring and switch port consumption. Outdoor-rated turret models handle temperature swings and humidity. Total load: ~180 Mbps, 800 GB/day. Validate core network capacity and PoE++ distribution to avoid power starvation.

Frequently Asked Questions

What is the main advantage of multi-sensor IP cameras over single-sensor models?

Multi-sensor cameras deliver wider coverage (often 180°–360°) in a single mount point, reducing the number of cable runs, switch ports, PoE injectors, and ceiling penetrations. This simplifies installation in large open areas and minimizes blind spots, though you must account for higher per-camera bitrate and power consumption.

How much bandwidth does a multi-sensor camera consume?

Dual-sensor cameras typically consume 6–15 Mbps per sensor (12–30 Mbps total), while quad-sensor models range from 8–40 Mbps depending on resolution, frame rate, and codec. Always plan for the combined bitrate of all imagers active simultaneously; bitrate and storage retention calculators help size your NVR and switch.

Do multi-sensor cameras work with standard PoE switches, or do they require PoE++?

Dual-sensor models often work with PoE+ (30W), but quad-sensor cameras and those with active cooling typically need PoE++ (60W) or higher. Check the camera datasheet for power rating, then verify your switch model supports the required power class on each port; PoE switch capacity planning is critical at scale.

Can I stitch multi-sensor feeds into a single panoramic view?

Yes, many cameras embed firmware stitching, while others require NVR or third-party software to blend sensor streams. Verify compatibility between your camera brand (e.g., Axis, Hikvision) and NVR software before deploying; not all combinations support seamless panoramic output.

Are multi-sensor cameras suitable for outdoor use?

Yes. Outdoor-rated turret and bullet multi-sensor models from Hanwha, i-PRO, and Axis handle extreme temperatures, rain, and UV. Verify IP rating (IP66 or higher) and operating temperature range; thermal-fusion models excel at perimeter detection in low-light conditions.

How do I choose between dual-sensor and quad-sensor cameras?

Dual-sensor models cost less and consume half the bandwidth/power of quad-sensor equivalents, suitable for hallways and linear spaces. Quad-sensor cameras justify higher cost and bitrate in large open areas (warehouses, parking structures) where 360° coverage and fewer mount points are critical. Consider your identification distance requirements and available infrastructure capacity.

Plan Your Deployment

Showing Results for Multi-Sensor IP Cameras

Hanwha PNM-A13022RV 13MP Panoramic Multi-Sensor Dome

Hanwha PNM-C12083RVD/KEX 6MP Dual-Sensor AI Dome

Hanwha PNM-C16013RVQB 4MP Vandal Dome Camera

Hanwha PNM-C16083RVQ 16MP 4-Sensor Outdoor AI PTZ Camera

Hanwha PNM-C16083RVQ/KEX 4MP Multi-Sensor Outdoor Dome

Hanwha PNM-C20000QB 4CH 2MP Network Remote Head Camera

Hanwha PNM-C32083RQZ/KEX 8MP Vandal Dome Camera

Hanwha PNM-C32083RVQ 32MP 4x8MP Multi-Sensor Outdoor AI Camera

Hanwha PNM-C32083RVQ/KEX 8MP Multi-Sensor Vandal Dome

Hanwha PNM-C34404RQPZ 34MP Outdoor AI PTZ Camera

Hanwha PNM-C34404RQPZ/KUS 8MP Vandal PTZ Camera

Hanwha PNM-C7083RVD 4MP 2x2MP IR Outdoor Motorized Varifocal Dome IP Camera

Hanwha PNM-C7083RVD/KEX 2MP AI Dome Camera

Hanwha PNM-C9022RV 8MP Panoramic Camera

Hanwha TNM-C2712TDR Bi-Spectrum Fire Detection Camera

Hanwha TNM-C2722TDR Bi-Spectrum Fire Detection Camera

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Multi-Sensor IP Cameras

Frequently Asked Questions

Related Categories

Engineering Reading