Code Blue · 41417

Code Blue 41417 Security Bit/Driver/Screws Kit

Component kit containing specialized bits, drivers, and screws

• Tamper-resistant bit design blocks unauthorized disassembly of secured enclosures.
• All-in-one kit ships bits, driver, and matching screws — no separate sourcing needed.
• Compatible with Code Blue security and access control components for direct-fit installs.

Code Blue · 41418

Code Blue 41418 Security Bit/Driver/Screws Kit

Security bit, driver, and screw kit designed for tamper-resistant fastening in professional security installations

• Tamper-resistant fasteners prevent unauthorized removal of enclosures and devices.
• Bundled bits, driver, and screws reduce field prep time across multi-point installs.
• Matched security bit and screw design maintains installation integrity post-deployment.

Code Blue · 41421

Code Blue 41421 IP Surge Suppressor

Network-inline surge suppressor designed to protect IP cameras, NVRs, and PoE-powered security devices from transient voltage spikes caused by

• MOV + gas discharge topology clamps 6kV+ transients before they reach PoE endpoints.
• Supports 802.3af/at/bt PoE pass-through with no voltage drop or signal degradation.
• Inline RJ45 Cat5e/Cat6 form factor installs into existing runs without recabling.

Code Blue · 41423

Code Blue 41423 Button Lg Raised Red IP 3pk

Replacement button accessory designed for Code Blue paging amplifier systems and security control panels operating on 12-24V DC

• Large raised red profile supports gloved-hand actuation in industrial environments.
• Sealed IP-rated construction withstands moisture, dust, and washdown conditions.
• 3-pack format enables multi-station deployment or backup inventory without reordering.

Code Blue · 41440

Code Blue 41440 Strobe Lens 3-Pack Blue

Three-pack of replacement blue strobe lenses designed for Code Blue security lighting systems operating on 12-24V DC power

• Three-pack format reduces service call frequency across multi-point strobe deployments.
• 12–24V DC compatibility integrates directly with existing Code Blue strobe power supplies.
• Drop-in replacement requires only hand tools—no electrical work or recalibration needed.

Code Blue · 41442

Code Blue 41442 Banding Tool Kit

Professional-grade banding tool kit designed for cable and wire management in security installations

• Complete banding tool set streamlines cable organization in structured cabling deployments.
• Suits indoor and outdoor security installations including access control and surveillance runs.
• Compatible with standard banding materials, reducing the need for separate tooling on-site.

Code Blue · 41467

Code Blue 41467 Large Data Red Button 3pk

Replacement button assembly designed for Code Blue paging amplifiers and access control systems operating on 12-24V DC power

• Three-pack supply reduces downtime risk across multi-point activation deployments.
• 12–24V DC rated; drops into existing Code Blue paging amplifier slots without rewiring.
• Oversized red button face supports gloved-hand use and low-light emergency activation.

Code Blue · 41472

Code Blue 41472 Surge Protector Analog - 3 Pack

Passive analog surge protection module designed for security and surveillance system equipment

• Passive analog design activates instantly on voltage transient—no firmware or batteries needed.
• 3-pack covers multiple 12V DC camera feeds, alarm panels, or PoE injector outputs per order.
• Compact form fits DIN rail, junction boxes, and racks with no enclosure modifications required.

Code Blue · 41549

Code Blue 41549 Strobe LED Harness CB1 5-Pack

Replacement harness assembly designed to power and interconnect strobe LED modules in emergency paging and security systems

• Supports 12–24V DC infrastructure, covering mixed-voltage legacy and modern deployments.
• Pre-terminated connectors reduce field termination labor and minimize wiring errors on swap-outs.
• 5-pack SKU simplifies bulk stocking for service trucks and multi-unit CB1-series installations.

Code Blue · 41584

Code Blue 41584 Base Gasket 1/9 Series

Replacement base gasket designed for the 1/9 Series paging amplifier line

• Direct drop-in replacement for Code Blue 1/9 Series paging amplifiers; no modification needed.
• Seals enclosure against dust, moisture, and contaminants — critical for outdoor or high-humidity sites.
• Elastomer resists UV, ozone, and salt spray, extending amplifier service life in harsh environments.

Code Blue · 41586

Code Blue 41586 Base Gasket 5 Series

Replacement base gasket designed for the 5 Series paging amplifier lineup operating on 12-24V DC power supplies

• OEM elastomer seal fits Code Blue 5 Series amplifiers for drop-in replacement.
• Blocks dust and moisture ingress, reducing corrosion and audio distortion risk.
• Rated for 0–50°C thermal cycling, maintaining seal compression over service life.

Code Blue · 41601

Code Blue 41601 Touch Up Paint Kit SBL

Touch-up paint kit designed for field maintenance and cosmetic repair of Code Blue SBL series security equipment

• Color-matched formulation for SBL series prevents visible finish mismatch after repair.
• Treats chips and scratches on-site, eliminating equipment removal or downtime.
• Seals exposed metal surfaces to block corrosion during long-term outdoor deployment.

Code Blue · 41602

Code Blue 41602 Touch Up Paint Kit SRD

Touch-up paint kit designed for Code Blue SRD-series camera enclosures and outdoor surveillance housings

• Restores protective finish on Code Blue SRD-series enclosures after field installation.
• Quick-drying formula enables on-site touch-up repairs without pulling equipment offline.
• Addresses corrosion on exposed metal surfaces, extending enclosure service life outdoors.

Code Blue · 41603

Code Blue 41603 Touch Up Paint Kit SYL

Touch-up paint kit designed to restore and maintain the finish on Code Blue security equipment and accessories

• Color-matched formula restores Code Blue equipment finish during field maintenance.
• Compatible with Code Blue security accessories and replacement parts for consistent results.
• Durable paint formulation provides long-term finish protection on installed hardware.

Code Blue · 41605

Code Blue 41605 Touch Up Paint Kit MBZ

Touch up paint kit designed for Mercedes-Benz security camera housings and mounting hardware

• MBZ factory-matched formulation restores OEM finish on camera housings.
• Quick-drying formula minimizes downtime during field repairs and reinstallation.
• Covers scratches and chips on outdoor-rated housings and mounting brackets.

Code Blue · 41609

Code Blue 41609 Touch Up Paint Kit BRG

• Matches BRG bronze/gray powder-coat finish on Code Blue camera housings.
• Quick-dry formula enables spot repairs without full equipment repainting.
• Covers minor scratches and scuffs on housings and mounting hardware.

Code Blue · 41611

Code Blue 41611 Touch Up Paint Kit CRD

Component kit designed for specific paging amplifier models

• Color-matched finish restores CRD-series devices without hardware removal or downtime.
• Compact kit format supports field service repairs on scuffs, scratches, and minor damage.
• Sealing minor damage sites helps protect exposed metal from corrosion on installed units.

Code Blue · 41612

Code Blue 41612 Touch Up Paint Kit TOR

Touch up paint kit formulated for Code Blue TOR-series security housings and enclosures

• Formulated specifically for Code Blue TOR-series housings to ensure accurate color match.
• Pre-measured paint allows consistent field touch-ups without mixing or calibration steps.
• Restores cosmetic appearance on-site, avoiding full housing replacement during maintenance.

Code Blue · 41613

Code Blue 41613 Touch Up Paint Kit BSL

Touch-up paint kit designed for BSL-series security equipment

• Factory color-matched paint restores BSL-series hardware to original finish.
• Touch-up format enables quick field repairs without removing installed equipment.
• Compatible with all Code Blue BSL models, simplifying maintenance inventory.

Code Blue · 41636

Code Blue 41636 S-1000 Kit Amber Color

Replacement kit designed for Code Blue paging amplifier systems

• Operates on 12–24V DC, fitting existing low-voltage power infrastructure.
• Amber color variant simplifies visual identification during installation and maintenance.

Code Blue · 41639

Code Blue 41639 Centry Power Connector w/Torx

Replacement power connector designed for specific Code Blue paging amplifiers

• Supports 12–24V DC dual voltage, fitting varied power supply configurations.
• Torx drive fastening resists tampering and secures connection points in the field.
• Direct replacement for Code Blue Centry amplifiers, minimizing system downtime.

Code Blue · 41640

Code Blue 41640 Small IP-CALL Tactile Button

Replacement tactile button designed for IP-CALL emergency communication and paging systems

• Operates on 12–24V DC, compatible with standard Code Blue paging amplifier supplies.
• Tactile switch delivers audible click feedback, reducing missed activations in emergencies.
• Direct OEM fit for Code Blue IP-CALL stations; no software configuration required.

Code Blue · 41641

Code Blue 41641 Small IA-CAL Tactile

Compact tactile interface component designed for security and audio control systems requiring button or switch input integration

• Operates across 12–24V DC, eliminating voltage regulation hardware in mixed-voltage panels.
• Hardwired tactile input adds non-networked emergency trigger points to existing audio/alarm systems.
• Compact form factor drops into retrofit control cabinets and wall panels without layout redesign.

Code Blue · 41802

Code Blue 41802 30in Reflective Blue Graphic

30-inch reflective graphic overlay designed for identification and visibility enhancement on security equipment panels, amplifier assemblies, and

• 30-inch retroreflective overlay maintains panel visibility in darkness without power.
• Adhesive-backed design installs on doors and mounting surfaces without tools.
• UV and weather-resistant material suits indoor and sheltered outdoor enclosures.

Code Blue · 41803

Code Blue 41803 30in White Assistance Graphic

30-inch white assistance graphic designed for paging amplifier and access control system installations

• 30-inch white graphic panel provides high-contrast visual ID at control-room distances.
• Compatible with 12–24V DC paging amplifier systems; no auxiliary power conversion needed.
• Drop-in replacement for existing Code Blue paging installations, minimizing maintenance downtime.

Code Blue · 42002

Code Blue 42002 Equipment Ring 5in. w/Post BSLCC

Mounting accessory designed to secure and position audio and surveillance equipment in integrated security system deployments

• 5-inch ring diameter fits standard equipment frames and mounting sleeves in audio/surveillance racks.
• Integrated post mount supports pole and vertical rail installation, reducing outdoor deployment steps.
• Compatible with Code Blue paging amplifiers operating on 12–24V DC for consistent signal routing.

Code Blue · 42500

Code Blue 42500

Security component engineered for integration into professional surveillance and access-control installations

• Integrates directly with Code Blue control platforms, reducing engineering overhead on deployments.
• Plug-and-play architecture shortens installation cycles during system expansions and upgrades.
• Qualifies as a direct field-replacement component, minimizing downtime during maintenance events.

Code Blue · 42501

Code Blue 42501 Emergency Graphic Signage 30"

N emergency graphic signage solution designed to mark critical facility points—exit routes, equipment locations, assembly areas, and emergency

• ANSI Z535-compliant graphics satisfy OSHA and facility safety audit requirements.
• 30-inch height delivers legible recognition at 40–60 feet in commercial facilities.
• Weather-resistant build handles UV, rain, and humidity without fading or delamination.

Code Blue · 42504

Code Blue 42504 30in White Police Replacement Part

Specific replacement part designed to maintain the operational integrity of certain Code Blue paging amplifier units

• 30-inch white component fits Code Blue paging amplifier housings without modification.
• Rated for 12–24V DC operation, compatible with standard Code Blue amplifier assemblies.
• Drop-in spare part restores audio distribution integrity and minimizes system downtime.

Code Blue · 42507

Code Blue 42507 Graphic 20in. Emergency White

Replacement graphic display panel designed for Code Blue paging amplifier systems

• 20-inch white graphic panel delivers high-visibility emergency alerts in corridors and lobbies.
• Operates on 12–24V DC from existing Code Blue paging amplifiers; no extra power conditioning needed.
• Drop-in field-replaceable design minimizes downtime during maintenance or system reconfiguration.

Code Blue · 42508

Code Blue 42508 13in Emergency Blue Graphic 2-Pack

Replacement graphic signage component designed for Code Blue emergency paging and security notification systems

• 13-inch emergency blue panels meet ANSI color standards for instant occupant recognition.
• 2-pack allows simultaneous primary and backup replacement without system downtime.
• Drop-in fit for Code Blue 12–24V DC paging systems; no rewiring or tools required.

Code Blue · 49015

Code Blue 49015 Large Bezel Tactile IP

Replacement bezel component designed for IP-based security control panels and tactile interface devices

• Large bezel format improves tactile accuracy in low-light and high-stress environments.
• 12–24V DC input range integrates directly with standard access-control and paging power buses.
• Drop-in replacement design for Code Blue panels reduces swap labor on multi-site deployments.

Code Blue · 49108

Code Blue 49108 Bezel Assembly BLANK

Replacement bezel assembly designed for Code Blue paging amplifiers and audio distribution systems operating on 12-24V DC power

• Blank faceplate allows field-cut customization for buttons, indicators, and labeling.
• Compatible with 12–24V DC systems, supporting low-voltage and industrial DC bus inputs.
• Direct-replacement bezel for Code Blue amplifier chassis enables field repair without full unit swap.

Code Blue · 50562

Code Blue 50562 IP1501-s Spanish Assistance Module

Spanish-language assistance module designed to extend paging and audio distribution capabilities across multilingual security installations

• Operates on 12–24V DC, fitting standard security power infrastructure without added transformers.
• Parallel connectivity allows integration into existing paging amplifier wiring with minimal rewiring.
• Drop-in Spanish-language module extends multilingual audio distribution to speaker zones and intercom networks.

Code Blue · 51058

Code Blue 51058 IP2500-s SBL Push Button

Hardwired push-button emergency call station designed for IP-integrated mass notification and paging deployments

• IP2500-s SBL push-button module for Code Blue VoIP towers
• 12-24V DC operation matches Code Blue paging amplifier supplies
• Drops into IP2500-s tower for one-press emergency activation

Code Blue · 60012-CB

Code Blue 60012-CB IA4100-k PFH/INFO Enclosure

Replacement enclosure housing designed for the IA4100-k paging amplifier platform

• Direct-fit replacement for IA4100-k enclosures eliminates custom adaptation work.
• Supports 12–24V DC input, covering hardwired and battery-backed emergency systems.
• Component-level swap-out preserves existing wiring harnesses and terminal connections.