Refine by

No filters applied

PoE Injectors & Midspans

PoE injectors and midspans provide Power over Ethernet to devices such as IP cameras, intercoms, and access control hardware. These solutions are ideal when adding PoE to non-PoE switches or expanding power capacity in existing network deployments.

Plan Your Deployment

Power requirements (PoE, PoE+, PoE++, total wattage)
Number of devices and port capacity planning
Distance limitations and cable quality considerations
Integration with existing switches and infrastructure
Redundancy and long-term scalability needs

PoE Planning Guide Get Recommendations

Showing Results for PoE Injectors & Midspans

Compare

Out of stock
Altronix

SKU: HUBWAY162CD

Altronix HUBWAY162CD 16-Port Passive UTP Hub

16-port PoE injector for IP cameras, access control, and intercoms
Special Order · Ships in 2-3 weeks

$2,296.22 $1,345.99 Save $950.23

Add to Cart
The item has been added
Free shipping over $499

$2,296.22 $1,345.99 Save $950.23

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY162D

Altronix HUBWAY162D 16-Port Passive UTP Hub

16-port passive Layer 1 hub for IP camera and access control networks
Special Order · Ships in 2-3 weeks

$2,296.22 $1,345.99 Save $950.23

Add to Cart
The item has been added
Free shipping over $499

$2,296.22 $1,345.99 Save $950.23

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY162DI

Altronix HUBWAY162DI 16-Port UTP Transceiver Hub

16-output hub for mid-scale security power distribution
Special Order · Ships in 2-3 weeks

$2,420.59 $1,560.99 Save $859.60

Add to Cart
The item has been added
Free shipping over $499

$2,420.59 $1,560.99 Save $859.60

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY163CD

Altronix HUBWAY163CD 16-Port UTP Transceiver Hub

16-port managed switch for IP security cameras and access control
Special Order · Ships in 2-3 weeks

$2,538.01 $1,486.99 Save $1,051.02

Add to Cart
The item has been added
Free shipping over $499

$2,538.01 $1,486.99 Save $1,051.02

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY163D

Altronix HUBWAY163D 16-Channel Passive UTP Transceiver Hub

16-channel UTP hub, 750 ft video runs, selectable 24/28VAC power
Special Order · Ships in 2-3 weeks

$2,538.01 $1,486.99 Save $1,051.02

Add to Cart
The item has been added
Free shipping over $499

$2,538.01 $1,486.99 Save $1,051.02

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY163DI

Altronix HUBWAY163DI 16 Channel Passive UTP Transceiver Hub

16-port PoE hub for centralized IP camera and access control power
Special Order · Ships in 2-3 weeks

$2,905.20 $1,701.99 Save $1,203.21

Add to Cart
The item has been added
Free shipping over $499

$2,905.20 $1,701.99 Save $1,203.21

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY16CD

Altronix HUBWAY16CD 16-Channel Passive UTP Hub

16-channel passive hub for analog video over UTP to 750 feet
Special Order · Ships in 2-3 weeks

$1,748.50 $1,000.99 Save $747.51

Add to Cart
The item has been added
Free shipping over $499

$1,748.50 $1,000.99 Save $747.51

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY16D

Altronix HUBWAY16D 16-Channel Passive UTP Transceiver Hub

16-channel passive hub with 750ft UTP video reach and integrated power
Special Order · Ships in 2-3 weeks

$1,748.50 $1,024.99 Save $723.51

Add to Cart
The item has been added
Free shipping over $499

$1,748.50 $1,024.99 Save $723.51

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY16DI

Altronix HUBWAY16DI 16-Channel UTP Transceiver Hub

16-channel UTP hub extends video 750 feet over Cat5e/6 cabling
Special Order · Ships in 2-3 weeks

$2,115.72 $1,239.99 Save $875.73

Add to Cart
The item has been added
Free shipping over $499

$2,115.72 $1,239.99 Save $875.73

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY82CD

Altronix HUBWAY82CD 8-Channel Passive UTP Hub

8-channel passive UTP hub for centralized security system distribution
Special Order · Ships in 2-3 weeks

$1,182.17 $692.99 Save $489.18

Add to Cart
The item has been added
Free shipping over $499

$1,182.17 $692.99 Save $489.18

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY82CDS

Altronix HUBWAY82CDS 8-Channel Passive UTP Transceiver Hub

8-channel PoE hub with individual output supervision for distributed security
Special Order · Ships in 2-3 weeks

$1,174.26 $687.99 Save $486.27

Add to Cart
The item has been added
Free shipping over $499

$1,174.26 $687.99 Save $486.27

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY82D

Altronix HUBWAY82D 85-Output PoE Hub

85-port PoE hub in 19-inch rack for centralized power distribution
Special Order · Ships in 2-3 weeks

$1,182.17 $692.99 Save $489.18

Add to Cart
The item has been added
Free shipping over $499

$1,182.17 $692.99 Save $489.18

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY82DI

Altronix HUBWAY82DI 8-Port PoE Injector Module

8-port PoE hub with 750-foot video range and isolated 24/28VAC outputs
Special Order · Ships in 2-3 weeks

$1,365.76 $800.99 Save $564.77

Add to Cart
The item has been added
Free shipping over $499

$1,365.76 $800.99 Save $564.77

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY82DS

Altronix HUBWAY82DS 8-Port Passive UTP Hub

8-port UTP hub with 750ft video reach and selectable 24/28VAC power
Special Order · Ships in 2-3 weeks

$1,174.26 $687.99 Save $486.27

Add to Cart
The item has been added
Free shipping over $499

$1,174.26 $687.99 Save $486.27

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY83CD

Altronix HUBWAY83CD 8 Channel Passive UTP Transceiver Hub

8-port PoE injector for IP cameras and access control over extended runs
Special Order · Ships in 2-3 weeks

$1,307.62 $765.99 Save $541.63

Add to Cart
The item has been added
Free shipping over $499

$1,307.62 $765.99 Save $541.63

Add to quote Compare
Compare

Out of stock
Altronix

SKU: HUBWAY83CDS

Altronix HUBWAY83CDS 8 Channel Passive UTP Transceiver Hub

8-channel passive UTP hub for IP security system distribution
Special Order · Ships in 2-3 weeks

$1,181.18 $761.99 Save $419.19

Add to Cart
The item has been added
Free shipping over $499

$1,181.18 $761.99 Save $419.19

Add to quote Compare

Browse by Product Family

Click through to shop the families that fit your poe injectors & midspans deployment.

Single-Port PoE Injectors

Compact inline injectors that add PoE to a single non-PoE port or extend power to a single device. Ideal for retrofit installations, remote locations, and small expansions where a full PoE switch isn't justified.

Multi-Port PoE Midspans

Rack-mount or desktop units that inject power into 4–24 non-PoE switch ports simultaneously. Designed for scaling existing switch infrastructure without replacing hardware.

High-Power PoE+ & PoE++ Injectors

30W, 60W, 90W, and higher output injectors that power demanding devices like pan-tilt-zoom cameras, dual-NIC access readers, and outdoor intercoms. Essential for next-generation surveillance and control hardware.

Managed PoE Injectors & Midspans

Smart injectors with per-port power limiting, SNMP monitoring, and remote management. Enable granular budget enforcement and real-time visibility into power draw across distributed deployments.

Gigabit & Multi-Gigabit PoE Solutions

Injectors and midspans rated for 1Gbps, 2.5Gbps, or 5Gbps data rates to support high-bitrate 4K/8K cameras, multiple streams, and bandwidth-sensitive access control architectures.

Industrial & Outdoor PoE Injectors

Ruggedized, wide-temperature units with surge protection, IP ratings, and DIN-rail mounting for harsh environments, rooftop arrays, and perimeter security installations.

Passive PoE & Legacy Injectors

Passive PoE and proprietary-protocol injectors for legacy IP cameras, wireless bridges, and specialized surveillance equipment that predate 802.3af/at standards.

What to Look For When Buying

The decisions that matter most before you spec.

Calculate Total PoE Budget & Device Power Draw

Every injector or midspan has a maximum power budget (often 60W, 90W, or 240W+). Sum the actual power consumption of all connected devices—not just rated maximums—and add 20% headroom. Our PoE budget planning guide breaks down real-world power math to prevent brownouts and frame loss.

Verify Port Count & Future Expansion

Single-port injectors suit one-off retrofits; multi-port midspans (4–24 ports) consolidate power for entire switch banks. Plan for at least 15–20% spare capacity to accommodate future camera adds, readers, or intercom modules without ripping out infrastructure.

Match Power Standard to Device Requirements

Standard PoE (802.3af, 15.4W) works for basic cameras and entry readers. PoE+ (802.3at, 30W) and PoE++ (802.3bt, 60W–100W) are required for PTZ domes, thermal cameras, and multi-radio access control hubs. Check device datasheets against injector output specs to avoid undersizing.

Account for Cable Run & Voltage Drop

Long cable runs (>300 feet) can degrade voltage at the device end. Higher-power injectors and shorter runs, or thicker gauge cabling, minimize drop. System reliability begins with proper power delivery—undersized injectors on long runs cause intermittent failures during peak usage.

Assess Management & Monitoring Needs

Unmanaged injectors are cheaper but blind; managed units (from Altronix, Ubiquiti, and Hanwha) offer per-port power limits, SNMP traps, and web dashboards. For multi-site deployments or compliance-heavy environments, management ROI is fast.

Plan for Environmental & Compliance Requirements

Indoor wiring closets tolerate standard injectors; rooftop and outdoor perimeter require surge protection, conformal coating, and extended temperature ranges. Industrial-rated units from Speco and Altronix meet UL/FCC standards and survive weather, power spikes, and EMI.

Technology Stack

The specs and acronyms that actually affect poe injectors & midspans performance.

802.3af (PoE)

IEEE standard delivering up to 15.4W at the injector, ~12.95W at the device (after cable loss). Sufficient for fixed cameras, basic IP phones, and lightweight access readers. Limited by long cable runs and high-draw devices.

802.3at (PoE+)

Enhanced standard supporting 30W at injector, ~25.5W at device. Required for PTZ domes, motorized zoom cameras, and multi-port access control readers. Common in modern surveillance and intercom deployments.

802.3bt (PoE++)

High-power variant with Type 3 (60W) and Type 4 (100W+) output. Enables thermal cameras, powerful outdoor intercoms, redundant-NIC readers, and wireless mesh nodes without separate power runs. Future-proofs infrastructure.

Gigabit & Multi-Gigabit Data Rate

Data transmission at 1Gbps, 2.5Gbps, or 5Gbps parallel to power delivery. Ensures high-bitrate 4K/H.265 camera streams and responsive access control signals aren't throttled by older 100Mbps injectors. Matters for dense, high-resolution deployments.

Per-Port Power Limiting & Budget Management

Managed injectors allocate max watts per port and throttle or disconnect devices that exceed limits. Prevents one hungry PTZ from starving other cameras; enables dense deployments without over-provisioning total power.

Surge Protection & Temperature Rating

Industrial-grade injectors include voltage transient suppression (TVS diodes), fused inputs, and -40°C to +70°C operation. Standard units (0–50°C) fail in rooftop heat and outdoor cold; surge-protected units survive lightning, power spikes, and extreme weather.

Typical Deployment Scenarios

5-Camera Retrofit on Existing Non-PoE Switch

Deploy five IP cameras on an old 100Mbps switch with no PoE. Use a 90W managed 5-port midspan or five single-port injectors in star topology. Verify total camera draw (~15W each = 75W) fits the injector; add backup power for continuity.

20-Camera Multi-Building Campus with Distributed Power

Install PoE+ injectors (30W each) at three wiring closets serving 6–8 cameras per closet. Use managed units from Altronix or Ubiquiti for per-building monitoring and failover alerting. Plan for future access control readers (10W each) on spare ports.

Outdoor Rooftop PTZ & Thermal Array

Mount 8 outdoor cameras (2× PTZ 60W + 6× thermal 40W each = 280W total) using industrial-rated PoE++ midspan with conformal coating and DIN-rail housing. Include surge suppression rated for rooftop EMI; run thicker (10 AWG) Ethernet to minimize voltage drop over 250+ feet to switch.

Intercom & Access Reader Expansion

Add intercom stations (25W each) and multi-NIC access readers (35W each) to existing Gigabit switch. Use PoE+ or PoE++ injectors with per-port limits to prevent reader reboot loops during peak badge traffic. Coordinate with access control system architect for redundancy.

Top Brands for PoE Injectors & Midspans

Click through to each brand for engineering profile and NDAA compliance status.

Altronix

Authorized dealer · browse the full Altronix catalog for this category

Ubiquiti

Authorized dealer · browse the full Ubiquiti catalog for this category

Speco Technologies

Authorized dealer · browse the full Speco Technologies catalog for this category

Axis

Authorized dealer · browse the full Axis catalog for this category

Hanwha

Authorized dealer · browse the full Hanwha catalog for this category

Vivotek

Authorized dealer · browse the full Vivotek catalog for this category

Frequently Asked Questions

What's the difference between a PoE injector and a PoE midspan?

A single-port injector adds power to one non-PoE port (or one cable run) and is ideal for retrofits or remote devices. A midspan is a rack or desktop unit with 4–24 ports that injects power into a bank of existing switch ports, scaling power without replacing the switch. Both use the same IEEE PoE standards; choice depends on scale and convenience.

Can I use a standard PoE injector for a PTZ camera?

No. Standard PoE (802.3af, 15.4W) is insufficient for pan-tilt-zoom motors, which typically draw 25–60W under motion. Use PoE+ (30W) or PoE++ (60W+) injectors rated for the camera's peak load. Check the PTZ datasheet for maximum power draw, including fan/heater in extreme conditions.

How do I prevent voltage drop on long cable runs?

Use higher-power injectors (90W+ output compresses voltage regulation window), upgrade to thicker Ethernet cable (10 AWG vs. standard 24 AWG), or install a second injector mid-run. For runs over 300 feet, test end-of-line voltage under load; aim for ≥44V DC at the farthest device. See our budget planning guide for voltage drop math.

Should I buy managed or unmanaged injectors?

Unmanaged injectors are cheaper ($50–150) but offer no visibility; use them for small, stable deployments. Managed injectors ($200–600) provide SNMP monitoring, per-port power limits, and email alerts—essential for multi-site, compliance-heavy, or dynamic environments. ROI is fast in larger systems.

What surge protection do I need for outdoor installations?

Outdoor PoE runs must include TVS (transient voltage suppression) diodes and fused inputs in the injector, plus Ethernet surge arrestors at the camera end. Industrial-rated injectors from Speco and Altronix include built-in surge protection; standard units do not. Lightning risk is real—don't skip it.

Can a single injector power multiple devices in series?

No. PoE is point-to-point: one injector powers one cable/device pair (or one midspan port powers one switch port + all devices behind it). You cannot daisy-chain injectors or passively extend PoE down a cable. Use Ethernet extenders for very long runs beyond PoE cable limits.

Related Categories

Adjacent equipment that typically ships alongside these products.

Power Delivery & Supplies Routers & Gateways Extenders & Repeaters Network Switches Switch Modules Media Converters Sensors & IoT Wireless Bridges

Engineering Reading

Deep-dives from our engineering team on deployment planning.

Why Surveillance Systems Fail During Incidents Why Your NVR Can't Handle Its Rated Camera Count Why Surveillance Networks Collapse at the Core Why Large Surveillance Systems Fail: Storage Throughput Reality Why Surveillance Standards Collapse After the Third Location Why 4K Cameras Fail at Night Why Your PoE Switch Fails After 18 Cameras Frame Rate vs. Reality: When 30 FPS Makes Your System Worse