Media Converters for IP Surveillance & Access Control

Plan Your Deployment

Fiber type (single-mode vs multi-mode) and distance requirements
SFP module compatibility and port configuration
Bandwidth and throughput planning
PoE pass-through requirements if applicable
Installation environment and enclosure protection

Showing Results for Media Converters

Compare

Out of stock
TSC

SKU: TH240HC-A002-0201

TSC TH240HC-A002-0201 Thermal Transfer Ribbon Cartridge

Thermal transfer ribbon for TSC TH240HC label printers at 203 dpi
Special Order · Ships in 2-3 weeks

$1,072.00 $877.99 Save $194.01

Add to Cart
The item has been added
Free shipping over $499

$1,072.00 $877.99 Save $194.01

Add to quote Compare
Compare

Out of stock
Veracity

SKU: VLT-1N-SC100

Veracity VLT-1N-SC100 LIGHTSPAN Media Converter

Fiber-to-Ethernet converter for extended surveillance and security networks
Special Order · Ships in 2-3 weeks

$193.50 $173.99 Save $19.51

Add to Cart
The item has been added
Free shipping over $499

$193.50 $173.99 Save $19.51

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AO-20W

Vivotek AO-20W Ethernet Wiegand Converter

Ethernet-to-Wiegand converter for legacy access control integration
- Dual-port TCP/UDP conversion with up to 96-bit Wiegand output
- 8 digital inputs + 4 outputs (relay + 3 digital) for flexible I/O
- DC 9-24V, 2W max power; -20°C to 65°C operating range
Special Order · Ships in 2-3 weeks

$642.00 $456.99 Save $185.01

Add to Cart
The item has been added
Free shipping over $499

$642.00 $456.99 Save $185.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AW-IHS-0200

Vivotek AW-IHS-0200 Industrial 10/100M to 100M SC Media Converter -40°C to 75°C

Industrial media converter, 10/100M copper to 100M fiber, -40°C to 75°C
- Converts RJ45 Ethernet to SC multi-mode fiber with 2 km range
- Operates -40°C to 75°C in harsh industrial environments
- IP40 aluminum housing, DIN-rail/wall mount, 2W power consumption
Special Order · Ships in 2-3 weeks

$185.00 $131.99 Save $53.01

Add to Cart
The item has been added
Free shipping over $499

$185.00 $131.99 Save $53.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AW-IHS-0201

Vivotek AW-IHS-0201 Industrial Media Converter

Industrial media converter extending Ethernet to 30 km fiber links
- Single-mode SC fiber reaches 30 km at 1310nm for long-distance runs
- 10/100Base-TX auto-negotiation with MDI/MDI-X detection and flow control
- Operates -40°C to 75°C in IP40 aluminum housing, DIN-rail or wall mount
Special Order · Ships in 2-3 weeks

$244.00 $173.99 Save $70.01

Add to Cart
The item has been added
Free shipping over $499

$244.00 $173.99 Save $70.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AW-IHS-0202

Vivotek AW-IHS-0202 Industrial Media Converter

Copper-to-fiber media converter, 20 km reach, -40°C to 75°C industrial
- Dual RJ45 + SFP fiber port converts 10/100Base-TX to single/multi-mode fiber
- Extends network 20 km over fiber while handling extreme temps -40°C to 75°C
- IP40 aluminum housing, DIN-rail mount, 2W power for remote surveillance sites
Special Order · Ships in 2-3 weeks

$150.00 $107.99 Save $42.01

Add to Cart
The item has been added
Free shipping over $499

$150.00 $107.99 Save $42.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AW-IHT-0502

Vivotek AW-IHT-0502 Industrial 4-Port PoE+ Media Converter

4-port PoE+ to fiber media converter, 30 km reach, -40°C to 75°C
- Four 10/100Mbps PoE+ ports deliver 30W each (120W total) for cameras
- SC single-mode fiber extends network 30 km at 1310nm wavelength
- Dual redundant 48-56VDC inputs with failover for continuous operation
Special Order · Ships in 2-3 weeks

$354.00 $252.99 Save $101.01

Add to Cart
The item has been added
Free shipping over $499

$354.00 $252.99 Save $101.01

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1025950-034

Zebra P1025950-034 Ribbon Core Kit GT-Series 50

Ribbon core kit for Zebra GT-Series 50 thermal printers
Special Order · Ships in 2-3 weeks

$148.89 $147.99 Save $0.90

Add to Cart
The item has been added
Free shipping over $499

$148.89 $147.99 Save $0.90

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1027135-014

Zebra P1027135-014 Ribbon Out Sensor Kit (Thermal Transfer)

Ribbon out sensor kit for Zebra thermal transfer printers
Special Order · Ships in 2-3 weeks

$55.51 $54.99 Save $0.52

Add to Cart
The item has been added
Free shipping over $499

$55.51 $54.99 Save $0.52

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1027135-046

Zebra P1027135-046 Ribbon Carriage Kit 203 DPI

OEM ribbon carriage for 203 DPI Zebra thermal printers
Special Order · Ships in 2-3 weeks

$277.50 $215.99 Save $61.51

Add to Cart
The item has been added
Free shipping over $499

$277.50 $215.99 Save $61.51

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1027135-047

Zebra P1027135-047 GX430t Ribbon Carriage 300DPI

Ribbon carriage for Zebra GX430t 300DPI thermal printers
Special Order · Ships in 2-3 weeks

$462.94 $358.99 Save $103.95

Add to Cart
The item has been added
Free shipping over $499

$462.94 $358.99 Save $103.95

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1027135-048

Zebra P1027135-048 4" Thermal Transfer Ribbon Core

4" thermal transfer ribbon cores for Zebra G-Series printers
Special Order · Ships in 2-3 weeks

$135.36 $134.99 Save $0.37

Add to Cart
The item has been added
Free shipping over $499

$135.36 $134.99 Save $0.37

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1037974-012

Zebra P1037974-012 Ribbon Spindle Core Kit ZT200

Replacement ribbon spindle cores for Zebra ZT200 thermal printers
Special Order · Ships in 2-3 weeks

$15.17 $14.99 Save $0.18

Add to Cart
The item has been added
Free shipping over $499

$15.17 $14.99 Save $0.18

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1046696-042

Zebra P1046696-042 Ribbon Roller Kit ZE500

Replacement ribbon rollers for ZE500-6 thermal label printers
Special Order · Ships in 2-3 weeks

$231.73 $179.99 Save $51.74

Add to Cart
The item has been added
Free shipping over $499

$231.73 $179.99 Save $51.74

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1058930-094

Zebra P1058930-094 Ribbon Strip Platen & Static Brush Kit ZT410

Ribbon platen and static brush kit for Zebra ZT410 label printers
Special Order · Ships in 2-3 weeks

$57.93 $56.99 Save $0.94

Add to Cart
The item has been added
Free shipping over $499

$57.93 $56.99 Save $0.94

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1080383-209

Zebra P1080383-209 Ribbon Carriage Kit ZD420T ZD620T

Ribbon carriage assembly for ZD420T and ZD620T thermal printers
Special Order · Ships in 2-3 weeks

$277.50 $215.99 Save $61.51

Add to Cart
The item has been added
Free shipping over $499

$277.50 $215.99 Save $61.51

Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

Distance & Fiber Type Selection

Single-mode fiber extends reach beyond 2 km with lower attenuation; multimode is cheaper for short campus runs. Audit your actual camera-to-switch distance before selecting converter type. Multi-site deployments often expose distance miscalculations when adding remote facilities.

PoE Power Continuity Across Fiber Links

Standard media converters do not pass PoE; use integrated PoE converters or add a separate PoE injector on the far end to power remote cameras. Verify PoE budget at both conversion points to prevent power failures. PoE budget miscalculation is a leading cause of system collapse.

Bitrate Throughput & Network Congestion

Confirm your media converter supports the total camera bitrate plus overhead. A 100 Mbps converter becomes a bottleneck with three or more high-resolution cameras. Network collapse at the core switch is often traced to undersized fiber links and converters.

Redundancy & Failover Architecture

Single fiber runs are single points of failure. Deploy dual converters with managed switches supporting spanning-tree or rapid re-convergence to minimize downtime when fiber cuts or converters fail. Industrial converters often support redundant power for greater reliability.

Environmental Hardening for Field Installations

IP67-rated converters, wide temperature ranges (–40°C to +75°C), and fanless operation reduce maintenance in uncontrolled shelters and equipment vaults. Verify connector type (LC vs. SC) matches your existing fiber plant before ordering.

Integration with Existing Brands & Ecosystems

Camera manufacturers like Axis, Hanwha, and i-PRO often publish tested converter pairings. Transition Networks and Pelco converters are widely certified for surveillance-grade reliability and warranty support.

Technology Stack

The specs and acronyms that actually affect media converters performance.

Single-Mode Fiber (SMF)

Narrow-core fiber (9 µm) with low chromatic dispersion, enabling runs of 40–80+ km without signal loss. Required for long campus or regional deployments; more expensive than multimode.

Multimode Fiber (MMF)

Larger core (50/62.5 µm) allowing shorter distances (up to 2 km typical). Cheaper cabling and connectors; standard for building-to-building or in-building backbone links.

LC & SC Connectors

LC (Lucent Connector) is small, push-pull, and common in modern installations; SC is older, screw-type. Ensure your fiber plant uses matching connector types before deployment.

Gigabit Ethernet over Fiber

1000BASE-LX (long-wave, up to 10 km) and 1000BASE-SX (short-wave, up to 550 m) for high-bitrate camera feeds. Backward-compatible with 100 Mbps but verify your switch supports speed negotiation.

PoE Injection at Fiber Boundary

Integrated PoE converters inject power on the Ethernet side after fiber conversion, eliminating mid-span splitter complexity. Verify wattage (passive vs. 802.3at/bt) matches your camera power draw.

Auto MDI/MDI-X & Link Detection

Media converters with auto-sensing prevent cable pinout errors and detect link loss immediately, triggering failover or alerts. Critical for unattended remote sites.

Typical Deployment Scenarios

Campus Security Network (4 Buildings)

Central NVR in Building A connects to three remote camera shelters (Buildings B, C, D) 800 m apart via multimode fiber (LC connectors). Deploy six multimode media converters (one per building entry/exit) plus PoE injectors at each remote shelter to power outdoor PTZ and turret cameras. Use managed switches with ring or redundant topology.

Utility Substation Remote Video (40 km)

Control center 40 km from substation requires high-reliability fiber video link. Deploy dual single-mode converters (primary + standby) with industrial temperature and fanless design, connected via underground single-mode fiber (9 µm). Add gateway routers for secure remote access to captured feed.

High-Speed Traffic Monitoring (Multi-Lane Highway)

Ten ANPR cameras at mile marker 5 sending full-res frames to central database 8 km away. Use gigabit converters (1000BASE-LX) with multimode fiber backbone to handle sustained throughput. Storage throughput becomes critical at scale; confirm your converter and switch support line-rate forwarding.

Access Control Multi-Site Integration (3 Locations)

Three office buildings (500 m, 1.5 km, 3 km from HQ) need real-time credential databases for card readers and intercoms. Deploy multimode converters for <500 m and 1.5 km runs; upgrade to single-mode for the 3 km link. Add extenders if future camera expansion is planned beyond 2 km.

Frequently Asked Questions

Do I need a media converter or just longer Ethernet cable?

Ethernet over copper (Cat6/Cat6a) is limited to ~100 m maximum and loses signal in high-EMI environments (electrical substations, RF transmitters). Fiber extends distance to 2 km (multimode) or 80+ km (single-mode) with immunity to interference. Media converters are mandatory for long-distance surveillance.

Can a standard media converter pass PoE power to remote cameras?

No. Standard fiber converters only carry data. To power remote cameras, use a PoE-enabled media converter or install a separate PoE injector on the Ethernet side after the converter. Always verify the converter's PoE wattage (passive, 30 W, 60 W, 90+ W) matches your camera's draw.

What's the difference between LC and SC fiber connectors?

LC connectors are small, snap-in style and dominate modern installations. SC connectors are larger, screw-type and common in legacy fiber plants. They are not interchangeable—ensure your media converter, fiber plant, and switch ports all use the same connector type before purchase.

Should I use single-mode or multimode fiber for my 2 km campus link?

Multimode fiber is sufficient up to 2 km and costs less. Use single-mode if you need to exceed 2 km, want future-proof expandability, or operate in areas where multimode fiber is unavailable. Check with your fiber contractor on existing plant before specifying converter type.

How do I ensure media converter redundancy if a fiber cut occurs?

Deploy dual converters (primary + backup) on separate fiber strands or physically diverse routes. Configure your managed switches with rapid spanning-tree (RSTP) or link-aggregation to trigger failover within 1–5 seconds. Test failover before deploying.

What specifications matter most when selecting an industrial media converter?

Look for wide temperature range (–40°C to +75°C minimum), fanless operation (no moving parts to fail), redundant power inputs, and DIN-rail mounting. Verify auto MDI/MDI-X detection for cable-agnostic connections. Check how infrastructure robustness prevents downtime during peak incidents.

Media Converters

Plan Your Deployment

Showing Results for Media Converters

TSC TH240HC-A002-0201 Thermal Transfer Ribbon Cartridge

Veracity VLT-1N-SC100 LIGHTSPAN Media Converter

Vivotek AO-20W Ethernet Wiegand Converter

Vivotek AW-IHS-0200 Industrial 10/100M to 100M SC Media Converter -40°C to 75°C

Vivotek AW-IHS-0201 Industrial Media Converter

Vivotek AW-IHS-0202 Industrial Media Converter

Vivotek AW-IHT-0502 Industrial 4-Port PoE+ Media Converter

Zebra P1025950-034 Ribbon Core Kit GT-Series 50

Zebra P1027135-014 Ribbon Out Sensor Kit (Thermal Transfer)

Zebra P1027135-046 Ribbon Carriage Kit 203 DPI

Zebra P1027135-047 GX430t Ribbon Carriage 300DPI

Zebra P1027135-048 4" Thermal Transfer Ribbon Core

Zebra P1037974-012 Ribbon Spindle Core Kit ZT200

Zebra P1046696-042 Ribbon Roller Kit ZE500

Zebra P1058930-094 Ribbon Strip Platen & Static Brush Kit ZT410

Zebra P1080383-209 Ribbon Carriage Kit ZD420T ZD620T

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Media Converters

Frequently Asked Questions

Related Categories

Engineering Reading