Sub categories

Showing Results for Infrastructure

Compare

Out of stock
Code Blue

SKU: CB1E00519

Code Blue CB1E00519 Network Switch PoE
- PoE support eliminates separate power runs, reducing wiring complexity at each node.
- Operates on 24V DC, compatible with Code Blue paging amplifiers and IP security gear.
- Ethernet connectivity centralizes data and power distribution for multi-device deployments.
$6,020.00 $5,212.99 Save $807.01

Add to Cart
The item has been added
Free shipping over $499

$6,020.00 $5,212.99 Save $807.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1E00522

Code Blue CB1E00522 PoE Network Switch
- Delivers PoE power and data over a single Ethernet cable, eliminating separate DC runs.
- Accepts 12–24V DC input, supporting both new builds and legacy power infrastructure.
- Native Code Blue component ensures direct compatibility with IP endpoints and intercoms.
$6,020.00 $5,212.99 Save $807.01

Add to Cart
The item has been added
Free shipping over $499

$6,020.00 $5,212.99 Save $807.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1E00527

Code Blue CB1E00527 CB1e SBL WSe NP PoE Network Switch
- Delivers PoE power and data over a single cable, eliminating remote power supplies.
- Layer 2/3 managed switching with VLAN and QoS prioritizes voice and alarm traffic.
- Mounts in wall, pole, recessed, or 19-inch rack configurations for flexible deployment.
$5,720.00 $4,952.99 Save $767.01

Add to Cart
The item has been added
Free shipping over $499

$5,720.00 $4,952.99 Save $767.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1E00539

Code Blue CB1E00539 Access Point Module
- Runs on 120V AC power, simplifying integration into standard electrical infrastructure.
- BLE connectivity enables low-energy wireless communication within Code Blue security systems.
- Functions as a gateway/access point module, supporting networked security deployments.
$7,990.00 $6,917.99 Save $1,072.01

Add to Cart
The item has been added
Free shipping over $499

$7,990.00 $6,917.99 Save $1,072.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00019

Code Blue CB1S00019 PoE Network Switch
- Integrated PoE eliminates external injectors, simplifying remote node deployments.
- 12–24V DC input runs directly on battery or generator backup without UPS overhead.
- Layer 2 managed switching supports VLANs and spanning-tree for network segmentation.
$6,720.00 $5,818.99 Save $901.01

Add to Cart
The item has been added
Free shipping over $499

$6,720.00 $5,818.99 Save $901.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00702

Code Blue CB1S00702 Network Switch
- Accepts 24V DC input, integrating directly into existing facility power distribution.
- PoE output delivers power and data over a single Ethernet cable to connected IP devices.
- Supports wall, pole, recessed, and rack mounting for flexible deployment across site types.
$6,970.00 $6,034.99 Save $935.01

Add to Cart
The item has been added
Free shipping over $499

$6,970.00 $6,034.99 Save $935.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00703

Code Blue CB1S00703 Network Switch
- PoE over Ethernet eliminates separate power injectors for IP paging endpoints.
- 12–24V DC input range supports direct UPS and backup battery integration.
- Plug-and-play with Code Blue security and audio platforms reduces deployment time.
$6,970.00 $6,034.99 Save $935.01

Add to Cart
The item has been added
Free shipping over $499

$6,970.00 $6,034.99 Save $935.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00791

Code Blue CB1S00791 CB1s SYL BLEm NP PoE Network Switch
- Integrated PoE+ (802.3at) eliminates separate power runs to remote CB1s nodes.
- Single RJ45 feed delivers both data and 24V DC power, reducing backbone cabling.
- Hot-swappable module design allows expansion or replacement without system downtime.
$6,720.00 $5,818.99 Save $901.01

Add to Cart
The item has been added
Free shipping over $499

$6,720.00 $5,818.99 Save $901.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00810

Code Blue CB1S00810 Network Switch
- PoE support delivers data and device power over a single Ethernet cable.
- Operates on 24V DC, integrating directly with Code Blue paging amplifiers.
- Ethernet connectivity enables reliable data distribution in multi-device deployments.
$7,020.00 $6,077.99 Save $942.01

Add to Cart
The item has been added
Free shipping over $499

$7,020.00 $6,077.99 Save $942.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00822

Code Blue CB1S00822 CB1s SBL WAs NP PoE Network Switch
- Integrated PoE eliminates external injectors, powering cameras, readers, and intercoms inline.
- 12–24V DC input range accommodates diverse power architectures across multi-site deployments.
- Native CB1s controller compatibility reduces integration labor via factory-configured firmware.
$6,720.00 $5,761.99 Save $958.01

Add to Cart
The item has been added
Free shipping over $499

$6,720.00 $5,761.99 Save $958.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00848

Code Blue CB1S00848 CB1s GWT BKEm NP PoE Switch
- PoE delivery eliminates separate power injectors, reducing cabling runs at each endpoint.
- Native CB1s series compatibility enables plug-and-play integration with existing deployments.
- Direct replacement for failed switch components in installed CB1s systems, minimizing downtime.
$6,720.00 $5,818.99 Save $901.01

Add to Cart
The item has been added
Free shipping over $499

$6,720.00 $5,818.99 Save $901.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB1S00850

Code Blue CB1S00850 Network Switch
- Delivers PoE power over Ethernet, eliminating separate PSUs at remote endpoints.
- Operates on 24V DC, integrating cleanly into low-voltage security power infrastructure.
- Compact form factor supports rack or wall mounting across distributed installations.
$7,340.00 $6,354.99 Save $985.01

Add to Cart
The item has been added
Free shipping over $499

$7,340.00 $6,354.99 Save $985.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB2A00055

Code Blue CB2A00055 CB2a SS BLSe NP PoE Network Switch
- PoE support delivers power and data over a single cable, reducing installation wiring.
- Stainless steel housing resists corrosion in harsh or outdoor security deployments.
- 12–24V DC input range accommodates varied power supply configurations on-site.
$2,870.00 $2,484.99 Save $385.01

Add to Cart
The item has been added
Free shipping over $499

$2,870.00 $2,484.99 Save $385.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB2A00224

Code Blue CB2A00224 Network Switch
- PoE support eliminates separate power runs, reducing installation complexity.
- Stainless steel housing delivers durability across demanding deployment environments.
- Ethernet connectivity integrates directly with Code Blue IP security infrastructure.
$2,870.00 $2,484.99 Save $385.01

Add to Cart
The item has been added
Free shipping over $499

$2,870.00 $2,484.99 Save $385.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB2A00292

Code Blue CB2A00292 Network Switch
- PoE delivery consolidates data and power over one Ethernet run, cutting cabling labor.
- 24V DC operation matches Code Blue CB2 amplifier platforms—no voltage conversion needed.
- Stainless steel IP66-rated enclosure handles outdoor, high-humidity, and washdown sites.
$2,870.00 $2,386.99 Save $483.01

Add to Cart
The item has been added
Free shipping over $499

$2,870.00 $2,386.99 Save $483.01

Add to quote Compare
Compare

Out of stock
Code Blue

SKU: CB2A00298

Code Blue CB2A00298 Network Switch
- Delivers Power over Ethernet, eliminating separate power runs to connected devices.
- Operates on 24V DC, compatible with Code Blue paging amplifier infrastructure.
- Ethernet connectivity supports distributed IP security and audio network installations.
$3,270.00 $2,831.99 Save $438.01

Add to Cart
The item has been added
Free shipping over $499

$3,270.00 $2,831.99 Save $438.01

Add to quote Compare

Infrastructure

Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.

Plan Your Deployment

Total PoE power budget and port density requirements
Switch throughput and uplink capacity planning
Redundancy and failover design considerations
Distance limitations and fiber conversion needs
Power conditioning and voltage compatibility

PoE Planning Guide Get Sizing Help

What to Look For When Buying

The six decisions that matter most before you spec.

PoE Power Budget Math

A 24-port PoE+ switch with 370W total budget can't actually run 24 outdoor cameras at peak 25W each. Simultaneous peak — not nameplate — is the limit. Always verify per-port PoE allocation and total budget against actual camera load. See PoE budget planning and why your PoE switch fails after 18 cameras.

328-Foot Ethernet Limit

Cat5e, Cat6, and Cat6A all top out at 100 meters (328ft) per TIA-568. Past that, you need a media converter to fiber, a PoE extender, or an intermediate switch. Common gotcha: in-wall patch + faceplate + drop + jumper all count against 328ft. Long runs to perimeter cameras frequently exceed the limit — plan for fiber or coax-PoE extension.

Managed vs Unmanaged Switches

Unmanaged switches work for small deployments but provide no VLAN segmentation, no QoS for video traffic, no monitoring, and no remote troubleshooting. Managed switches (Layer 2 or Layer 3) let you isolate cameras on a dedicated VLAN, prioritize video over office traffic, and diagnose link failures from a central SNMP platform. Spec managed for any deployment over 8 cameras.

UPS Sizing & Runtime

NVR + switches + cameras + access control have very different power profiles than office gear. Size UPS for actual wattage of all connected loads + 20% headroom, and calculate runtime with battery-life curves (runtime is non-linear — doubling load often cuts runtime 60%+). Surveillance UPS should provide 15-30 min to accommodate generator transfer or graceful shutdown.

Copper vs Fiber Uplinks

In-rack uplinks on 10G copper (Cat6A) work fine for short runs. Between-building and multi-floor uplinks should be fiber — single-mode for >300m, multimode for under. Fiber is also electrically isolated, which matters in lightning-prone environments. Axis, Hanwha, and Ubiquiti switches include SFP/SFP+ uplinks across most models.

Cooling & Airflow in Racks

Surveillance gear runs 24/7 — a closed rack at 90°F interior temperature will fail drives and switches faster than spec. Specify perforated doors, rack-mount fans, and leave 1U of airflow gap above/below heat-generating equipment. NVRs with internal fans need front-to-back airflow; network switches vary by vendor. Check thermal spec before sealing a wall-mount enclosure.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

802.3af / at / bt PoE Standards

802.3af = 15.4W/port (entry cameras), 802.3at PoE+ = 25.5W/port (most outdoor cameras), 802.3bt PoE++ Type 3 = 60W, Type 4 = 90W (PTZ, heated, multi-sensor). Specify switch support for the highest standard your cameras need — future-proofing with PoE++ switches costs marginally more.

TIA-568 Cabling Standards

Cat5e rated to 1 Gbps at 100m. Cat6 rated to 10 Gbps at 55m, 1 Gbps at 100m. Cat6A rated to 10 Gbps at 100m with proper grounding. Use Cat6A for new surveillance cabling runs — marginal cost premium over Cat6, meaningful margin for long runs + high PoE.

SFP / SFP+ / QSFP+ Modules

Small Form-factor Pluggable optics for fiber uplinks. SFP = 1 Gbps, SFP+ = 10 Gbps, QSFP+ = 40 Gbps. Match module to switch vendor compatibility (some vendors lock to their own brand of optics). Multimode fiber with OM3/OM4 for ≤300m, single-mode for longer or future-proof runs.

VLAN Segmentation

Dedicated VLAN for surveillance isolates camera traffic from office network — improves security (camera-to-camera lateral movement blocked), performance (no contention with office traffic), and troubleshooting. Configure access-control and intercom VLANs separately. Managed switches required; unmanaged switches cannot segment.

Long-Reach PoE Extension

Ethernet-over-Coax (EoC) extends Ethernet + PoE to 1,500+ feet over existing RG59 coax — ideal for analog-to-IP retrofits. Ethernet-over-UTP extenders push runs to 4,000ft over CAT cable. NVT Phybridge CHARIoT, Altronix eBridge, and Veracity Highwire are the common product families. Rate-limited to 100 Mbps typically.

UPS Topology: Line-Interactive vs Double-Conversion

Line-interactive UPS switch to battery on power failure — sufficient for office gear. Double-conversion (online) UPS convert AC→DC→AC continuously, providing perfectly conditioned power — required for sensitive SCADA/security gear in dirty-power environments. Specify double-conversion for NVRs at critical sites.

Typical Deployment Scenarios

8-Camera Single-Site Retrofit

Existing network + 8 outdoor IP cameras. Add a 16-port managed PoE+ switch (Ubiquiti UniFi, Axis T85) on a dedicated VLAN. 1U rack UPS for the NVR + switch. 120-160 watts total PoE budget comfortably runs 8 outdoor cameras with heater + IR.

48-Camera Campus Upgrade

Four buildings, 48 cameras total, existing fiber backbone. Per-building 24-port PoE++ switch with SFP+ fiber uplink to core. Dedicated surveillance VLAN, QoS for video traffic, SNMP monitoring. 2-post relay rack in each IDF closet with dedicated surveillance UPS.

Perimeter Fence Line (1,200ft)

6 bullet cameras + 2 PTZs along perimeter fence, main NVR in building. Fiber media converter + outdoor-rated fiber to a PoE++ switch in a weatherproof enclosure at the fence line. Alternative: NVT Phybridge CHARIoT over existing coax for retrofit applications.

Multi-Floor Office Tower

Stacked IDFs on every floor, cameras + access control + intercom on dedicated VLANs. Cisco Catalyst or Ubiquiti UniFi Pro managed switches per floor with 10G fiber uplink to building core. Per-IDF 3U UPS. Integration with VMS and access control head-end at main BDF.

Frequently Asked Questions

How do I calculate PoE budget for a camera deployment?

Sum the peak wattage of every camera (not nameplate — check spec sheet for "PoE class" or "max consumption"). Add 15-20% headroom for inrush during cold-start. The result is your required simultaneous-peak PoE budget. A 24-port PoE+ switch advertised at 370W can only run about 18 outdoor cameras with heaters + IR — see PoE budget planning.

What's the maximum Ethernet cable run for an IP camera?

100 meters (328 feet) per TIA-568 — total distance from switch port to camera port. That includes in-rack patch cords, in-wall cabling, faceplate jack, and camera jumper. For longer runs, use fiber with a media converter or a long-reach PoE extender. Going past 328ft on copper causes intermittent packet loss that looks like camera problems.

Do I need managed or unmanaged PoE switches?

For more than 8 cameras or any mixed-use network (cameras sharing infrastructure with office traffic), specify managed. VLAN segmentation isolates camera traffic for security and performance; QoS ensures video gets bandwidth priority; SNMP monitoring surfaces failures before users call. Unmanaged switches are acceptable only for small standalone deployments.

What UPS runtime should I plan for an NVR + switch?

15-30 minutes of runtime at actual load is typical — enough to ride through brief outages or allow graceful shutdown before battery exhaustion. For sites with generator transfer, 5-10 minutes is sufficient. Size UPS wattage for actual connected load + 20%, and use the vendor's runtime-at-load curve (runtime is non-linear). Double-conversion UPS for sensitive or dirty-power sites.

How far can I extend PoE past 328 feet?

Ethernet-over-Coax extenders (NVT Phybridge CHARIoT, Altronix eBridge) push Ethernet + PoE to 1,500+ feet over existing RG59/RG6 coax — ideal for analog-to-IP retrofits. UTP-based extenders reach 2,000-4,000 feet on Cat cable at reduced bandwidth (typically 100 Mbps). For new runs over 328ft, fiber + PoE switch at the camera end is usually cleaner architecture.

Should I put cameras on a separate VLAN?

Yes — always. A dedicated camera VLAN isolates camera traffic from office network for security (blocks camera-to-camera lateral movement if one is compromised), performance (cameras don't contend with office bandwidth), and troubleshooting (camera traffic is cleanly separated for packet capture). Requires managed switches; takes 10 minutes to configure on Ubiquiti UniFi, Cisco Catalyst, or any enterprise switch.

Sub categories

Showing Results for Infrastructure

Infrastructure

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading