i-PRO

i-PRO

SKU: PWM40AW

i-PRO PWM40AW Wall Mount Bracket

• Die-cast aluminum body with powder-coat finish resists corrosion and UV in outdoor installs.
• Wall-mount configuration anchors to concrete, masonry, steel, or wood-frame surfaces.
• Lightweight at 2.95 lbs minimizes structural load and simplifies single-technician installation.

i-PRO

SKU: WJHD716/3000T3

i-PRO 16 Channel Real-time H.264 DVR 3 TB - WJHD716/3000T3

• Records all 16 analog channels simultaneously in real time with no frame-rate compromise.
• Factory-installed 3TB HDD eliminates external storage dependency for 24/7 continuous retention.
• H.264 compression maintains playback compatibility across legacy DVRs and modern VMS platforms.

i-PRO

SKU: VITRAN-EXTCAM-INSTL

I-Pro For School Bus Car Or Single Cabin - Vitran-Extcam-Instl

• Vibration-rated mount prevents camera drift and optical misalignment over fleet lifecycle.
• IP67-rated sealed connectors block road spray, salt, and moisture from degrading signal.
• Corrosion-resistant fasteners and pre-routed conduit cut per-vehicle install time under one hour.

i-PRO

SKU: TRTN-UA-IPS

i-PRO TRTN-UA-IPS Triton ULTRA Sensor Bundle

• Runs on PoE 802.3af (<13W), eliminating separate AC outlets in retrofit deployments.
• Built-in microphone enables two-way audio without additional hardware or audio interfaces.
• ONVIF-compliant, integrating with Genetec, Milestone, Avigilon, and ExacqVision platforms.

i-PRO

SKU: SR-OTSF-IP

i-PRO SR-OTSF-IP Cloud Collect One Time Fee

• One-time license fee eliminates recurring subscription costs for cloud video collection.
• Works over existing 802.3af PoE infrastructure—no additional power hardware required.
• Consolidates multi-site video streams into a single cloud account, removing local NVR dependency.

i-PRO

SKU: PLCD42HDA

i-PRO 42 Inch HD LCD Monitor - PLCD42HDA

• 42-inch HD LCD panel delivers enough screen real estate for multi-camera live feeds.
• VESA-compatible mount supports wall bracket or stand deployment in any control room.
• HDMI and VGA inputs integrate with ONVIF NVRs, VMS software, and analog converters.

i-PRO

SKU: MC-TM250

i-PRO Power Supply: Altronix Model # TM250 Enclosure - MC-TM250

• Houses the Altronix TM250 module for centralized power distribution across multiple zones.
• Supports wall or rack mounting to fit varied equipment room and closet layouts.
• Designed for i-PRO surveillance deployments requiring managed, fused circuit power delivery.

i-PRO

SKU: WVCW504S/22

i-PRO Super Dynamic 5 Vandal-resistant Fixed - WVCW504S/22

• 5MP (2560×1920) at 30fps supports facial ID at 6–10 ft without excess bitrate.
• IK08/IP66 ratings handle direct impact and dust or high-pressure water ingress.
• ONVIF compliance integrates with existing VMS platforms; ceiling or wall mountable.

i-PRO

SKU: IN100-CLX33134-MC1

I-Pro IN100-CLX33134-Bipsb-Nzd-626-Ctsd - IN100-CLX33134-MC1

• OEM-sourced component ensures exact mechanical and electrical fit for IN100-CLX33134 systems.
• Drop-in installation follows i-PRO standard procedures, reducing commissioning labor on-site.
• Factory-new construction with manufacturer warranty protects the installation investment long-term.

i-PRO

SKU: WV-U21301-V3L

i-PRO WV-U21301-V3L 2MP Indoor IR Dome Camera

• H.265 compression cuts bitrate 40–50% vs. H.264, reducing storage costs on 24/7 recording.
• 802.3af PoE (<13W) eliminates dedicated power runs and works with any standard PoE switch.
• ONVIF-compliant with H.264/MJPEG fallback ensures drop-in compatibility with legacy NVR platforms.

i-PRO

SKU: VITRAN-INTCAM-INSTL

I-Pro For School Bus Car Or Single Cabin - Vitran-Intcam-Instl

• Pre-wired, pre-tested assembly cuts field commissioning labor by 40–60%.
• Sealed connectors resist moisture ingress from condensation and humidity cycles.
• Native i-PRO VMS integration requires no protocol bridging or harness mods.

i-PRO

SKU: WV-U22501-F3L

i-PRO WV-U22501-F3L 5MP Indoor Vandal IR Dome Camera

• IK10-rated dome survives 5 kg impact drops, cutting replacement cycles in vandal-prone zones.
• 5 MP (2560×1920) at 30 fps delivers forensic-grade facial detail across indoor security spaces.
• 28 m IR LEDs and 120 dB WDR eliminate auxiliary lighting and handle high-contrast entry points.

i-PRO

SKU: WV-S09TFMTVL

i-PRO Security On-site Consulting Travel - WV-S09TFMTVL

• On-site facility walk-through validates camera placement and coverage gaps before procurement.
• Engineering staff oversee PoE provisioning, cabling, and NVR integration during installation.
• Post-commissioning verification confirms network segmentation, bandwidth, and device compliance.

i-PRO

SKU: WJHD616/3000T3

i-PRO 16 Channel H.264 DVR 3 TB Capacity - WJHD616/3000T3

i-PRO

SKU: TESTTEST

I-Pro Test - Testtest

i-PRO

SKU: WJ-HXE400P

i-PRO 9-Drive Expansion unit w/ no HDD - WJ-HXE400P

i-PRO

SKU: MC-T2MK77F16MC

i-PRO Altronix T2MK77F16 KIT Consists OF TROVE2 - MC-T2MK77F16MC

• Delivers 24 VDC output sized for door readers, EM locks, and solenoids.
• Integrates power and control functions into a single TROVE2-compatible kit.
• Consolidates protected power management across multiple access control zones.

i-PRO

SKU: MC-TM400K1DMC

i-PRO TM400K1DMC ; (ptc Protected Output - MC-TM400K1DMC

• PTC thermistor auto-limits overcurrent without fuse replacement or manual reset.
• Clears fault automatically once temperature drops, minimizing downstream device downtime.
• Fits standard 19-inch racks and DIN-rail enclosures with no external fuse holders needed.

i-PRO

SKU: MC-TM400K2MC

i-PRO TM400K2MC ; (fuse Protected Output Version) - MC-TM400K2MC

• Fuse-protected outputs isolate overcurrent faults, preventing cascade failures across multi-camera runs.
• Modular TM400K2MC architecture stacks into i-PRO power distribution enclosures for centralized management.
• Designed for NVR and central monitoring installations requiring circuit-level protection per output.

i-PRO

SKU: MC-75-D8PE2M-1

i-PRO FPO75-D8PE2M ; 1 X FPO75 75W Total Output - MC-75-D8PE2M-1

• 75W total PoE budget supports 4–6 mid-range IP cameras from a single injector.
• 802.3af/at/bt compatibility works with i-PRO, Axis, Hikvision, Dahua, and ONVIF devices.
• Passive midspan architecture retrofits non-PoE copper runs without switch replacement.