i-PRO WV-X66600-Z3K (6MP) Outdoor AI PTZ Dome Network IP Camera

i-PRO WV-X66600-Z3K Overview

The i-PRO WV-X66600-Z3K is a 6MP outdoor AI-capable PTZ dome camera engineered for wide-area surveillance in demanding environmental conditions. Built on the Ambarella CV22 System-on-Chip platform, this model delivers high-resolution imagery across a 30x optical zoom range with integrated edge AI processing—supporting up to 3 simultaneous analytics applications—without requiring external analytics servers. The camera is rated IP66 and NEMA 4X for dust and water ingress, IK10 for impact resistance, and rated for wind speeds up to 40 m/s, making it suitable for outdoor deployments in coastal, industrial, and high-wind environments.

i-PRO WV-X66600-Z3K Key Features

• 6MP 1/2.8-type CMOS Sensor: Captures 3328 x 1872 resolution for clear identification and wide-area monitoring with exceptional detail retention across dynamic scenes.
• 30x Optical Zoom with Extended Digital Reach: 4.5 mm to 135 mm focal length (62° to 2.5° horizontal field of view) enables seamless wide-to-tele coverage; Extra Zoom extends to 78x at 1280 x 720 resolution, with total digital zoom capability to 480x for forensic review.
• Adaptive Aperture Design: F1.8 at wide angle (4.5 mm) to F4.7 at telephoto (135 mm) maintains optimal light gathering throughout the zoom range, improving low-light performance and reducing noise in extended tele shots.
• Edge AI Processing—Up to 3 Concurrent Analytics: Ambarella CV22 SoC executes deep learning models directly on-camera for real-time object detection, classification, and tracking without backend server latency or bandwidth overhead. Supports custom ONVIF analytics profiles.
• 360° Endless Pan and -20° to +90° Tilt with 256 Presets: Motorized pan/tilt provides complete hemispherical coverage with programmable preset positions for intelligent patrol routes and quick-access hotspots—ideal for perimeter surveillance and large facility monitoring.
• H.265 / H.264 / JPEG Compression: Hardware-accelerated video encoding delivers bandwidth-efficient streaming without sacrificing frame rate; selectable codec allows VMS platform compatibility and network optimization for varied deployment scales.
• PoE++ (IEEE 802.3bt) or DC 54V Power: Maximum 37.8 W consumption supports both standards-based power-over-Ethernet (PoE++) and standalone DC power for flexible installation in retrofit and new-build scenarios; reduces cabling complexity in multi-camera deployments.
• IP66 / NEMA 4X / IK10 Environmental Hardening: Full dust and water sealing with impact-resistant housing withstands direct strikes and harsh weather extremes; -50°C to +60°C operating range ensures reliable operation in arctic and tropical climates.
• Wind Resistance to 40 m/s: Structural engineering and servo tuning allow stable PTZ operation and image quality maintenance in sustained high winds typical of exposed rooftop and coastal installations.
• Dual Audio I/O (3.5 mm Stereo): Integrated audio input and monaural output support two-way communication, incident verification, and remote audio messaging; 3-terminal alarm inputs enable integration with external sensors and trigger logic.
• ONVIF Profiles G / M / S / T Compliance: Full Profile support ensures out-of-box compatibility with major VMS platforms (Milestone, Genetec, Avigilon, etc.) and third-party management systems; no vendor lock-in.
• Compact Mounting Form Factor: 167 mm diameter x 205 mm height and approximately 3 kg weight fit flush into ceiling and wall penetrations typical of commercial HVAC and structural installations; reduced visual footprint in aesthetic-sensitive environments.

i-PRO WV-X66600-Z3K Integration & Compatibility

The WV-X66600-Z3K is fully compliant with ONVIF Profiles G, M, S, and T, enabling plug-and-play integration with ONVIF-certified VMS platforms including Milestone XProtect, Genetec Security Center, Avigilon Control Center, and Hanwha SmartCCTV. The Ambarella CV22 chipset supports standard REST APIs and RTSP streaming, allowing custom integrations and third-party middleware connections. Ethernet connectivity via 10Base-T / 100Base-TX RJ45 is standard; PoE++ power delivery via IEEE 802.3bt provides single-cable deployment with no separate power supply required. The camera supports preset management, continuous patrol, and event-triggered pan/tilt routines through standard ONVIF PTZ commands, compatible with all major physical security information management (PSIM) and video management platforms.