HPE DL20 G11 6325P 1X32G 4SFF SSD NA SVR - P83282-005

HPE P83282-005 ProLiant DL20 Gen11 1U Rack Server

Overview

The HPE ProLiant DL20 Gen11 in configuration P83282-005 is a 1U rack server built around Intel's Xeon 6325P processor, shipping with 32GB of DDR5 memory, two 960GB SATA SSDs, and a pair of 500W Platinum-rated hot-plug power supplies. This is a compact, dense compute platform for edge deployments, branch offices, and small-to-mid server rooms where rack space is at a premium but you still need enterprise-grade reliability and a path to expand storage or memory without pulling the server offline. If you've been searching for this unit as P83282 005, this is the same configuration.

Key Features

• Intel Xeon 6325P at 3.50 GHz, Quad-Core, 12MB L3 Cache: The 6325P sits in Intel's Xeon 6 family — the quad-core count is the right fit for workloads that are latency-sensitive rather than massively parallel: VMS recording engines, lightweight edge AI inference, branch ERP, or a dedicated surveillance NVR OS. The 12MB L3 cache keeps frequently-accessed data off main memory, which matters when you're running concurrent stream decoding or database queries.
• 32GB DDR5 UDIMM at 4800 MT/s (single DIMM, one slot populated): DDR5 at 4800 MT/s delivers roughly 1.5x the bandwidth of DDR4-3200 on a per-channel basis. The single-DIMM config leaves room to double capacity to 64GB without buying a new server — meaningful if this unit is destined for a VMS host that will grow channel count over time.
• 2x HPE 960GB SATA 6G Read Intensive SFF SSDs via Intel VROC SATA: Two 960GB drives give you approximately 1.92TB raw, typically configured as a RAID 1 mirror via the embedded Intel VROC SATA controller for OS and application resilience. Read-intensive class SSDs are rated for high read workloads — well suited for VMS playback, OS boot volumes, and application tiers where write endurance isn't the primary concern. Four SFF bays are present, so you can add two more drives without a chassis change.
• HPE Embedded 1GbE 4-Port BCM5719 Network Adapter: Four onboard 1GbE ports mean you can dedicate interfaces to management, camera network, uplink, and iLO without buying an add-in card. For a 64-camera NVR at ~4Mbps per stream, total inbound bandwidth is roughly 256Mbps — well within a single bonded pair of 1GbE links, and the four ports give you flexibility to segment traffic.
• 2x HPE 500W Flex Slot Platinum Hot-Plug Power Supplies: Platinum-rated efficiency means less heat and lower power draw under typical loads — important in dense rack environments. Hot-plug redundancy means a PSU failure doesn't require a maintenance window; you swap the failed unit while the server keeps running. For 24/7 surveillance or edge compute workloads, this is the right call.
• 3x High Performance Hot-Swap Fans: Hot-swap fans follow the same logic as hot-swap PSUs — no downtime for a fan failure. In a continuous-operation environment like a security operations center or always-on edge node, this eliminates one of the more common causes of unplanned outages.
• 1U Rack Form Factor, 4x SFF Drive Bays, Two PCIe Expansion Slots: At 1U, this server fits tight racks. Two expansion slots provide room for a dedicated HBA, 10GbE NIC, or GPU accelerator depending on your workload. Four SFF bays support up to four 2.5-inch drives — with two currently occupied, you have two open bays for additional storage without any chassis modification.

Integration and Compatibility

The P83282-005 runs standard HPE ProLiant firmware and supports iLO (Integrated Lights-Out) for remote management — critical for distributed deployments where the server is physically remote from IT staff. The Intel VROC SATA controller is compatible with standard RAID management tools and HPE's own Smart Storage Administrator. The four-port BCM5719 NIC is broadly supported across Linux and Windows Server environments and works with standard network management platforms. The 4SFF backplane is compatible with HPE-qualified 2.5-inch SAS and SATA drives, giving you flexibility when expanding storage capacity later.

Frequently Asked Questions

Q: How many drive bays does the P83282-005 have, and how many are currently populated?

A: The P83282-005 has four Small Form Factor (SFF) drive bays. Two are populated with HPE 960GB SATA 6G Read Intensive SSDs, leaving two bays open for additional drives without any chassis modification.

Q: Can I add more memory to this server?

A: Yes. The server ships with a single 32GB UDIMM in one slot. The remaining DIMM slots are available for additional DDR5 memory — consult the HPE QuickSpecs for the DL20 Gen11 for the maximum supported configuration and compatible part numbers.

Q: Does this server include redundant power supplies?

A: Yes. The P83282-005 ships with two HPE 500W Flex Slot Platinum Hot-Plug power supplies, providing full redundancy. Either PSU can be replaced while the server is running.

Q: What RAID options are available with the embedded storage controller?

A: The embedded Intel VROC SATA controller supports RAID configurations including RAID 0, 1, and 5. For more advanced RAID or a dedicated hardware RAID controller, one of the two PCIe expansion slots can accommodate an HPE Smart Array controller.

Q: What are the physical dimensions of the P83282-005?

A: The server measures 10.55 inches wide x 27.32 inches deep x 23.07 inches tall (1U rack height). Verify rack depth clearance — at over 27 inches deep, shorter two-post racks may require a shelf or rail kit.

Q: Is the P83282-005 suitable as a VMS recording server?

A: Yes, the configuration is appropriate for small-to-mid scale VMS deployments. The Xeon 6325P handles concurrent stream decoding, the dual SSDs provide a mirrored OS/application volume, and the four open 1GbE ports allow clean network segmentation. For high channel counts requiring large retention storage, plan on populating the remaining two SFF bays or attaching external storage.

Jerry Tildsen

The P83282-005 is one of the cleaner edge-server configurations I've seen at the 1U form factor — specifically, the dual 500W Platinum hot-plug PSUs and hot-swap fans together mean you have genuine N+1 redundancy on both the power and cooling sides in a 1U chassis, which is not a given at this size class. That combination matters most in deployments where pulling a server for maintenance means losing surveillance coverage or branch IT services.

Technical Highlights:

• Intel Xeon 6325P at 3.50 GHz / 12MB L3: The quad-core count is deliberate here — this CPU is optimized for per-core throughput rather than thread count, which aligns well with VMS engines and real-time analytics workloads that don't parallelize across dozens of cores.
• DDR5 at 4800 MT/s, single 32GB DIMM: The bandwidth headroom from DDR5 versus DDR4 is real, and the single-DIMM configuration means expansion is straightforward. Before buying additional DIMMs, verify the DL20 Gen11 QuickSpecs for supported densities — not all UDIMM capacities are validated at 4800 MT/s.
• Dual 960GB SATA SSD via Intel VROC SATA: The read-intensive endurance rating on these drives is appropriate for OS and application volumes but is not the right choice for a direct-write surveillance retention tier at scale. For large camera counts and long retention, plan external or additional drives in the two open SFF bays — do not rely on these two drives alone for multi-week footage retention.

Deployment Considerations:

• At 27.32 inches deep, confirm your rack or enclosure has adequate clearance — this is a known fit issue in wall-mount enclosures and some two-post open-frame racks where usable depth is 24–26 inches.
• The embedded Intel VROC SATA controller is capable for RAID 1 mirroring on the two included SSDs, but for any configuration requiring RAID 5/6 across four drives or a hardware write cache, budget for a PCIe Smart Array controller in one of the two expansion slots.

This configuration is well matched to a distributed physical security deployment — specifically a branch or remote site running a 32–64 channel VMS instance where space is limited, the server must stay online through routine maintenance, and the IT footprint needs to stay small. The redundant PSU and fan architecture make it a credible always-on platform without requiring a full enterprise-class chassis.