Honeywell 1990IXLR-3USB-N Granit XP 199Xi 1D/2D Area Imager Scanner
The Honeywell 1990IXLR-3USB-N is a wired USB area imager barcode scanner purpose-built for warehouse, retail point-of-sale, and logistics environments where equipment durability and consistent read accuracy directly impact throughput. Its IP65 ingress protection rating means dust and water splash won't interrupt scanning operations—a meaningful advantage in receiving docks, outdoor shipping areas, and high-moisture retail environments where cheaper consumer-grade scanners fail within months.
This is a close-range scanner. The 5–80 cm working distance positions it for counter-mounted checkout lanes, fixed conveyor-side scanning stations, and handheld operator use within arm's reach—not long-distance or mobile inventory scanning at extended ranges. The 2.0 m drop rating (approximately 6.5 feet) reflects real-world warehouse handling; the device will survive accidental drops onto concrete without requiring replacement, reducing total cost of ownership across high-volume operations.
Key Features
- Area Imager (1D/2D) Capture: Reads both linear barcodes (EAN, UPC, Code 128) and 2D codes (QR, Data Matrix, PDF417) from a single optical engine—future-proofs your infrastructure as supply chain standards shift from linear to 2D without requiring equipment replacement or dual-scanner setups.
- IP65 Rating: Sealed against dust and direct water spray; enables deployment in uncontrolled outdoor receiving areas, rain-exposed loading docks, and washdown-adjacent zones without enclosure or cover upgrades.
- USB Corded Connectivity: Eliminates battery management overhead and charging downtime; plug-and-play integration with POS terminals, warehouse management systems, and industrial tablets via standard USB (A or Type-C variants available). No separate power supply required.
- Close-Range Working Distance (5–80 cm): Optimized for near-field scanning—retail counter layouts, conveyor pick stations, and fixed-mount applications where operator-to-barcode distance is controlled and consistent. Not suitable for handheld long-distance scanning.
- 2.0 m Drop Tolerance: Survives accidental drops typical of warehouse handling conditions; reduces replacement frequency and associated downtime compared to consumer-grade scanners rated for 1.2 m or less.
- Multi-Symbology Support: Native support for EAN-13/8, UPC-A/E, Code 128, Code 39, Interleaved 2-of-5, QR Code, Data Matrix, PDF417, and others—enables single-scanner deployments across legacy and modern barcode workflows without manual configuration switching.
Integration & Compatibility
The 1990IXLR-3USB-N integrates directly into existing retail and warehouse ecosystems. USB connectivity provides native support for popular warehouse automation platforms and POS systems without requiring gateway devices or wireless bridging. Organizations using Honeywell WMS or retail solutions benefit from reduced integration complexity and faster deployment cycles.
The corded design is a critical trade-off: it eliminates mobility constraints present in wireless scanners, making it ideal for stationary checkout lanes, fixed workstations, and conveyor-mounted applications. If your operation requires roaming operators moving between multiple scanning zones, evaluate a wireless or mobile barcode scanner variant instead.
Typical Deployment Scenarios
- Retail Point-of-Sale: Counter-mounted or handheld checkout scanning with consistent operator-to-barcode proximity and high transaction volume.
- Warehouse Receiving & Picking: Bin verification, cycle counts, and receiving dock proof-of-receipt where equipment durability and IP65 protection reduce downtime.
- Shipping & Logistics: Proof-of-delivery verification and parcel tracking with exposure to outdoor elements and rough handling conditions.
- Manufacturing & Traceability: Quality control checkpoints and work-in-progress barcode capture on assembly lines.
- Asset Management: Fixed-asset tagging and inventory audits across indoor and lightly outdoor environments.
Frequently Asked Questions
Q: Is the 1990IXLR-3USB-N suitable for outdoor scanning in rain?
A: The IP65 rating protects against direct water spray and dust, making it suitable for covered outdoor areas and rain-exposed loading docks. It is not rated for full submersion (which would require IP67 or higher) or prolonged water jets from a pressure washer.
Q: Can the 1990IXLR-3USB-N read QR codes and 2D barcodes?
A: Yes. The area imager engine captures both 1D (linear) and 2D codes including QR, Data Matrix, and PDF417 natively, without firmware or hardware changes.
Q: What happens if the scanner is dropped?
A: The 2.0 m drop rating means the device will survive accidental drops from approximately 6.5 feet onto hard surfaces without functional damage. Drops from greater heights or onto sharp edges may cause damage beyond the rated tolerance.
Q: Does the 1990IXLR-3USB-N work with warehouse management systems?
A: Yes. USB connectivity supports integration with popular WMS platforms and POS systems. Consult your WMS vendor's device compatibility matrix to confirm the 1990IXLR-3USB-N model is listed; Honeywell-native integrations typically require no custom drivers.
Q: Is the scanner powered by USB or does it require a separate power supply?
A: The 1990IXLR-3USB-N draws power from the USB cable; no separate power adapter is needed. This simplifies wiring in stationary installations and eliminates AC power requirements at the scanning station.
Q: What symbologies does the 1990IXLR-3USB-N read?
A: Supported 1D codes include EAN-13/8, UPC-A/E, Code 128, Code 39, Interleaved 2-of-5, Codabar, and others. 2D support includes QR Code, Data Matrix, PDF417, and additional standards. Refer to the full datasheet for the complete list and any region-specific or specialized format support.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The 1990IXLR-3USB-N is a pragmatic choice for fixed-position scanning in retail and warehouse environments where durability and read consistency matter more than operator mobility. Its IP65 rating and 2.0 m drop tolerance directly reduce equipment replacement costs in high-throughput operations—a concrete ROI factor in logistics and receiving departments where scanner damage from moisture or drops is routine. The area imager engine gives you both legacy linear barcode and modern 2D code support from a single device, eliminating the need for dual-scanner checkouts or WMS workarounds as supply chain standards evolve.
Technical Highlights:
- IP65 Protection: Sealed against dust and water spray—typical of dock and outdoor loading areas where unprotected scanners fail within months. Saves recurring replacement costs in these environments.
- 2.0 m Drop Tolerance: Survives typical warehouse handling drops (6.5 feet). Direct comparison: consumer barcode scanners often fail at 1.2 m, requiring equipment refresh cycles.
- Area Imager 1D/2D Capture: Reads both EAN/UPC and QR/Data Matrix codes without re-configuration—simplifies multi-format deployments and reduces training overhead.
- USB Bus Power: Draws power from the USB cable alone; no separate power supply reduces installation footprint and eliminates power outlet requirements at the scanning station.
Deployment Considerations:
- The 5–80 cm working distance is a hard constraint. This scanner is optimized for counter and conveyor mounting, not handheld long-distance scanning. If operators must scan items at arm's length or across a room, this model will frustrate and underperform.
- Corded USB means limited mobility. Operators are tethered to a fixed workstation or POS terminal. If your workflow requires roaming between multiple pick locations or mobile cart-based scanning, a wireless or mobile computer variant is required.
- Integration with WMS and POS systems is plug-and-play via USB, but confirm your platform's device driver list includes the 1990IXLR model to avoid driver discovery delays at deployment.
Best fit: stationary retail checkout lanes, conveyor-mounted warehouse picking stations, and fixed receiving dock workstations where equipment ruggedness and two-format barcode support justify the lack of mobility. Skip this if your operation prioritizes roaming operator flexibility or long-distance scanning at extended ranges.
