HID

HID · 3000PGGMN

HID 3000PGGMN 2K Prog

When you're deploying iClass SE access control systems, you need credentials that match the security architecture without introducing compatibility

• Field-programmable SIO encoding lets you assign facility codes on-site at issuance.
• 13.56 MHz contactless reads integrate directly with iClass SE and multi-tech readers.
• Dual-gloss CR80 surface supports dye-sublimation printing and lamination overlays.

HID · 3000PG1MN

HID Iclass 2K/2 SE Prog F-gloss B-gloss W/mag Match NO Slot - 3000PG1MN

When you're upgrading legacy magnetic stripe systems to multi-technology access control without ripping out existing infrastructure, you need

• Bridges 13.56 MHz iCLASS SE and mag stripe on one card for phased migrations.
• SIO encoding across two app areas supports multi-application credential deployments.
• Rated –40 to 158 °F; direct-print ready surface suits high-use corporate environments.

HID · 25BNKS-10-000000

HID 25B Biometric Reader - 25BNKS-10-000000

When you need to eliminate credential sharing and enforce true identity verification at sensitive access points, biometric authentication becomes

• Multispectral fingerprint sensor stores up to 10,000 templates for 1:1 and 1:N matching.
• OSDP v2 Secure Channel and Wiegand output integrate with existing panel infrastructures.
• IP65-rated enclosure operates from -31°F to 150°F, supporting demanding installation sites.

HID · 2420PMGGMNN

HID 2420PMGGMNN Composite

When your access control deployment requires both iCLASS and MIFARE credential support on a single card, HID's composite credential technology

• Single 13.56 MHz card carries both iCLASS 2K/2 and MIFARE 1K chips for mixed-reader sites.
• Programmable iCLASS chip enables custom credential data; MIFARE ships non-programmed for legacy readers.
• Dye-sublimation-ready glossy composite construction supports photo ID badging in standard CR80 holders.

HID · 2124BGGMNN

HID Iclass Prox 32K(16K/16+16K/1) Comp PRO - 2124BGGMNN

When you're integrating legacy 125 kHz prox readers alongside newer 13.56 MHz iClass systems, dual-technology credentials eliminate the need to

• Dual 125 kHz / 13.56 MHz support lets one card serve legacy Prox and iClass readers.
• 32 KB memory with split iClass partitions supports secure SIO apps alongside Prox data.
• Composite CR80 body prints via dye-sublimation and survives -40 °F to 158 °F environments.

HID · 2122BGGMNN

HID 2122BGGMNN Composite Card

When you're migrating from legacy proximity to iClass but need to maintain backward compatibility across mixed-reader environments, composite

• Dual 125 kHz + 13.56 MHz in one card supports phased migration without swapping all readers.
• 16K/16 iCLASS memory accommodates multiple applications beyond basic access control.
• No slot punch preserves structural integrity; composite build rated from -40 to 158°F.

HID · 2122BGGMNM

HID Composite Iclass/prox 16K/16 Prog F-g - 2122BGGMNM

When you're managing a phased migration from legacy 125 kHz prox to iClass security, or supporting a facility that runs both technologies

• Operates on both 125 kHz prox and 13.56 MHz iCLASS readers from a single card.
• 16K/16 memory supports multiple access applications and leaves room for future expansion.
• Composite polyester-PVC construction survives -40°F to 158°F for long migration cycles.

HID · 2122BG1MNN

HID Composite /prox 16K/16 Prog F-gloss - 2122BG1MNN

When you're deploying access control systems that demand both physical durability and flexible credential programming, composite prox cards bridge

• Dual-frequency 125 kHz + 13.56 MHz supports both legacy Prox and iCLASS readers.
• 16 KB iCLASS memory with 16 application areas enables multi-use credential deployments.
• Composite construction rated -40 to 158 °F withstands extreme-temperature environments.

HID · 2121BGGMVM

HID 2121BGGMVM Composite Card

When you're deploying a hybrid access control system that needs to support both legacy 125 kHz prox readers and modern 13.56 MHz iCLASS technology

• Operates on both 125 kHz prox and 13.56 MHz iCLASS, supporting mixed reader environments.
• 16K-bit iCLASS memory with two application areas enables segmented, multi-site access control.
• Composite PVC/polyester construction resists warping across -40°F to 158°F operating range.

HID · 2120HBGGMNN

HID 2120HBGGMNN Prox Card - 2K/2 SR

When you're deploying dual-technology access control across a multi-building campus or upgrading legacy prox systems without ripping out existing

• Dual 125 kHz + 13.56 MHz operation lets one card serve legacy prox and iCLASS readers.
• Composite construction and -40°F to 158°F rating handle harsh entry-point environments.
• Pre-programmed 2K/2 iCLASS sector with 26-bit H10301 prox format ships deployment-ready.

HID · 2120BGGMVN

HID 2120BGGMVN Prox Card

When you need to migrate from legacy proximity systems to iClass without replacing every reader, dual-technology credentials bridge the gap

• Dual-tech card supports 125kHz Prox and 13.56MHz iCLASS
• 2K-bit memory with two programmable application areas
• Bridges legacy Prox and new iCLASS systems on one credential

HID · 2120BGGMVM

HID 2120BGGMVM Comp Prox 2K/S

When you're deploying access control systems that demand both legacy proximity support and modern smartcard flexibility, credential compatibility

• Dual 125 kHz Prox + 13.56 MHz iCLASS support enables phased reader migration without reissuing cards.
• Pre-programmed 2K iCLASS memory eliminates on-site encoding, accelerating large-scale credential rollouts.
• Composite CR80 construction rated -40 to 158°F suits demanding indoor/outdoor badge environments.

HID · 2120BGGMNM

HID Composite Iclass Prox 2K/2 Programmed - 2120BGGMNM

When you're deploying a dual-technology access control system that needs to support legacy proximity readers while transitioning to secure iClass

• Dual 125 kHz + 13.56 MHz operation lets one card serve both legacy Prox and iClass readers.
• Factory-programmed 26-bit H10301 format deploys immediately with no on-site encoding required.
• Composite construction rated -40 to 158 °F ensures reliable daily use in harsh environments.

HID · 2103PGGAN

HID 32K Composite Programmed - 2103PGGAN

• Factory-programmed 13.56 MHz iCLASS credential ships ready for immediate enrollment.
• 32K bit dual-application memory supports access control plus cashless vending or print management.
• Composite polyester/PVC construction rated -40 to 158°F for high-wear, wide-temperature deployments.

HID · 2101CGGNN

HID 2101CGGNN Composite Card

When you need durable, high-security credentials for multi-application access control deployments, composite construction delivers the mechanical

• Composite polyester/PVC body resists cracking and warping across -40 to 158 °F operating range.
• 16K/2 memory with Config F supports two independently managed applications on a single credential.
• Blank CR80 gloss card accepts dye-sublimation printing and custom sequential encoding out of box.

HID · 2100PGGMN

HID Composite Iclass Card 2K/2PROGLOSS NO - 2100PGGMN

When you need to migrate from legacy 125 kHz proximity to secure 13.56 MHz iClass without replacing every reader overnight, dual-technology cards

• Runs iCLASS SE at 13.56 MHz and HID Prox at 125 kHz from one card, no reader swap required.
• 2 KB onboard memory supports multiple application segments on a single iCLASS chip.
• Composite polyester/PVC construction survives -40 to 158 °F and accepts dye-sub direct printing.

HID · 2100PGGAV

HID Composite Iclass 2K/2 Prog - 2100PGGAV

When you need durable, reliable credentials for high-throughput environments where PVC cards won't survive the wear, composite construction delivers

• Composite PVC/PET construction survives -40°F to 158°F without cracking or warping.
• 13.56 MHz iCLASS contactless technology ensures fast, secure reads on HID-compatible readers.
• 2KB memory with two application areas supports access control plus a secondary use case.

HID · 2100PGGAN

HID Composite Iclass 2K/2 Prog - 2100PGGAN

When you're deploying access control in environments where durability matters but PVC longevity isn't required, composite credentials deliver the

• 13.56 MHz iCLASS technology delivers encrypted transactions across standard HID readers.
• 2 KB memory with 2 application areas supports multi-technology credential deployments.
• Composite polyester/PVC laminate withstands -40°F to 158°F and resists flex fatigue.

HID · 2100PG1NB

HID Composite Iclass 2K/2 Prog - 2100PG1NB

When you're deploying access control across facilities with mixed environmental demands—exterior doors, loading docks, or high-traffic entrances

• Polyester/PVC/polyester composite survives -40°F to 158°F without cracking or fading.
• 2KB memory with two programmable areas supports access control plus secondary apps on one card.
• 13.56 MHz iCLASS technology integrates with existing iClass SE and standard iClass readers.

HID · 2100PG1MV

HID Composite Iclass 2K/2 Prog - 2100PG1MV

When you're managing facilities with mixed legacy proximity and newer iClass systems, dual-technology credentials eliminate the headache of swapping

• Dual 125 kHz prox and 13.56 MHz iClass SE in one card supports phased reader migration.
• 2 KB memory with 2 application areas holds access control data plus additional use cases.
• Composite polyester/PVC build rated –40 to 158 °F suits harsh deployment environments.