Geovision 125-EBD4704-000 Compact IP Camera
Overview
The Geovision 125-EBD4704-000 (model GV-EBD4704) is a compact, fixed IP camera designed for retrofit and space-constrained surveillance deployments where mounting flexibility and weatherproof protection are non-negotiable. At 4.72" × 13.15" and 1.63 lbs, it fits tight ceiling cavities, narrow ledges, and pendant runs without drawing attention. The 235×126 resolution sensor paired with WDR handles mixed-light scenes—direct sun on the front entrance, shadow inside the vestibule—without the halo artifacts or detail loss you get from naive HDR. Integrated IR and Day/Night operation ensures 24/7 usability without manual filter swaps or sensitivity loss at dusk. H.265 compression cuts bandwidth demand roughly 40–50% versus H.264 on comparable bitrates, meaningful when recording dozens of compact units across a warehouse or retail chain. IP67 rating means dust and direct water spray won't compromise the optics or electronics—mount it on an exterior wall, loading dock, or covered soffit without hesitation. Standard PoE (802.3af) powered at under 13W, so it won't strain a modest PoE switch or require additional power infrastructure.
Compatibility
The 125-EBD4704-000 integrates with any standard ONVIF-capable video management system or NVR that supports H.265 and H.264 streams over standard IP networks. It uses industry-standard IPCAM cabling (Cat6 or Cat5e with PoE injectors or PoE switch ports). Compatible mounting solutions include wall brackets (GV-Mount211 series), pole mounts (GV-Mount420, GV-Mount440), pendant brackets (GV-Mount107), corner mounts (GV-Mount300, GV-Mount310), and extension tubes for standoff installations (GV-Mount704). Geovision also supplies compact junction boxes (GV-Mount212 series) for surface conduit runs. The camera's fixed 2.8mm lens (101° horizontal FOV, F/1.6) and standard 1/3" sensor mount to any standard compact camera bracket; verify your chosen mount hardware meets the 0.74 kg weight and mounting footprint.
Installation Notes
Ceiling or wall installation requires standard M3 or M4 fasteners depending on the chosen mount plate—verify your wall material and anchor type. PoE cabling runs should not exceed 100 meters (328 ft) for standard Cat6 without active injectors. The camera operates reliably from −40°C to 60°C, making it suitable for unheated warehouses, outdoor loading bays, and climate-controlled retail spaces. Ensure the lens and IR window face the subject without obstructions (trees, overhang shadows) that would block IR return at night. Standard RJ45 connector; no proprietary plugs or adapters required beyond a PoE-enabled switch port or injector.
What's in the Box
- 1× Geovision GV-EBD4704 compact IP camera
- 1× RJ45 connector and strain relief
- Mounting template and fastener kit (composition varies by chosen bracket)
