Panduit FROVRA6X4LYL FiberRunner 6x4 Vertical Outside 90-Degree Fitting
Overview
The Panduit FROVRA6X4LYL is a vertical, outside 90-degree bend fitting designed for the Panduit FiberRunner 6x4 cable management system. It creates a clean, controlled 90-degree vertical transition out of a straight horizontal runway — the component you need when a fiber run has to change planes without stressing the cable jacket or exceeding minimum bend radius. Built from polycarbonate/ABS, it is sized for data center and telecom central office environments where structured fiber routing is non-negotiable. If you are routing fiber from a horizontal tray down to a patch panel or equipment port, this is the fitting that makes that corner work correctly.
Key Features
- Vertical Outside 90-Degree Geometry: Routes a fiber run around an outside corner in the vertical plane — allowing a horizontal runway to transition downward or upward while maintaining the protective channel envelope. Without the correct fitting here, you are improvising with tie-wraps and risking bent fibers.
- 6x4 FiberRunner System Compatibility: Designed and dimensioned specifically for the 6x4 FiberRunner trunking system. At 7.78 in (197.6 mm) overall height and 7.04 in overall length, it integrates flush with standard 6x4 runway sections — no shimming, no adapters.
- Polycarbonate/ABS Construction: The PC/ABS blend provides the structural rigidity needed to maintain channel geometry under cable load while keeping weight down. In a populated data center ladder rack or overhead tray system, cumulative fitting weight adds up — this material keeps that in check.
- UL Listed per UL 2024A: Listed for fiber optic cable routing assemblies specifically, not just general electrical use. This matters for inspections in commercial and enterprise builds where the AHJ (authority having jurisdiction) requires listed components throughout the pathway.
- NEBS Level 3 Compliance: Meets Telcordia GR-63-CORE requirements — the seismic, thermal, and environmental benchmark for telecom central office gear. If you are installing in a carrier-grade CO or any facility with NEBS requirements in the spec, this fitting qualifies.
- RoHS Compliant: Meets EU restriction-of-hazardous-substances requirements. Required for projects with environmental compliance language in the contract, and standard practice for responsible data center builds.
- Sold as Single Unit (MOQ 5): Package quantity is 1 fitting; minimum order quantity is 5 units. Plan your bill of materials accordingly — budget for spares since you will typically have more than one vertical transition in a structured fiber deployment.
Integration & Compatibility
The FROVRA6X4LYL is part of the Panduit FiberRunner fiber routing system. It pairs with 6x4 straight sections, horizontal bends, tees, crosses, and end caps in the same family. For a complete fiber cable management installation, you will also need the appropriate mounting hardware, cover systems, and straight runway lengths from the 6x4 product line. The outside vertical fitting is a companion to the inside vertical fitting (for inside-corner transitions) — in a typical rack-to-overhead-tray run you may need both. If you are building out a new fiber pathway in a network infrastructure project, map every direction change and corner type before ordering fittings to avoid mid-install gaps.
What's in the Box
- 1x Panduit FROVRA6X4LYL FiberRunner 6x4 Vertical Outside 90-Degree Fitting (Yellow)
Frequently Asked Questions
Q: What cable management system does the FROVRA6X4LYL fit?
A: The FROVRA6X4LYL is designed exclusively for the Panduit FiberRunner 6x4 system. It does not fit the 4x4, 2x2, or other FiberRunner channel sizes.
Q: Is the FROVRA6X4LYL NEBS compliant?
A: Yes. It meets the requirements for relevant tests in Telcordia GR-63-CORE and qualifies for NEBS (Network Equipment Building Systems) Level 3 installations.
Q: Is the FROVRA6X4LYL UL listed?
A: Yes, it is UL listed under UL 2024A for fiber optic cable routing assemblies.
Q: What is the minimum order quantity for the FROVRA6X4LYL?
A: The minimum order quantity (MOQ) is 5 units. Each unit is sold individually (package quantity of 1), but you must order at least 5.
Q: What are the overall dimensions of the FROVRA6X4LYL?
A: Overall height is 7.78 inches (197.6 mm) and overall length is 7.04 inches. It is yellow polycarbonate/ABS.
Q: Is the FROVRA6X4LYL RoHS compliant?
A: Yes, it is RoHS compliant, making it suitable for projects with EU environmental compliance requirements or contracts specifying RoHS conformance.
The FROVRA6X4LYL is the fitting most installers forget to count until they are mid-run and short. In a standard 6x4 FiberRunner deployment — overhead horizontal trunking dropping down to a rack row — you will hit at least one outside vertical 90 per row end, and often more where the pathway changes elevation. At 7.78 inches tall and 7.04 inches long, this fitting has enough geometry to maintain a proper bend radius for the fiber count a 6x4 channel is designed to carry; do not substitute a smaller fitting from a different channel size and expect the same protection.
Technical Highlights:
- NEBS Level 3 / GR-63-CORE: This qualification is not cosmetic — carrier CO builds and colocation facilities frequently have NEBS language in their specs. Having a listed fitting means no substitution discussions at the punchlist stage.
- UL 2024A Listing: Listed specifically for fiber optic cable routing assemblies, not generic cable management. The distinction matters when your inspector knows the difference.
- PC/ABS Material: Polycarbonate/ABS holds its shape under the lateral load of a populated fiber bundle. Pure ABS can creep under sustained load at elevated ambient temperatures — the PC content in this blend addresses that in warm equipment rooms.
Deployment Considerations:
- MOQ is 5 units — if you are doing a single-rack pilot or a small fill, you will still receive 5. Build your project BOM to use the full carton (carton qty is also 5) and carry one as a spare per row; vertical outside corners in a structured deployment are rarely singular.
- Yellow color coding is system-standard for this FiberRunner family — do not mix with off-brand gray or white fittings in the same run if you are maintaining a color-coded fiber pathway discipline, as it creates ambiguity during future moves-adds-changes.
For a data center structured cabling project — particularly in a colocation or carrier environment where NEBS Level 3 is a contractual requirement — the FROVRA6X4LYL is the correct, compliant choice for every outside vertical 90-degree transition in a 6x4 FiberRunner pathway. Plan the full fitting schedule before ordering; one missed corner type will stall the installation.
