CyberPower PR3000RTXL2UHVACN 3000VA Rack UPS
Overview
The CyberPower PR3000RTXL2UHVACN is a 3000VA line-interactive UPS designed for small-to-medium surveillance, access control, and network infrastructure installations where you need reliable backup power in a compact footprint. This 2U rack-mounted unit delivers 3000W continuous output with enough battery capacity to sustain critical systems through brief mains failures—3.6 minutes at full load, 10.7 minutes at half load. The PR3000RTXL2UHVACN combines traditional rack efficiency with cloud-enabled remote management, making it practical for distributed security deployments where on-site attention isn't always possible.
Key Features
- 3000VA / 3000W capacity: handles multiple NVRs, switches, and access control panels simultaneously. Relevant when sizing for a 24-7 surveillance core—you won't overload the UPS if you're running a modest multi-camera installation plus network and access-control electronics.
- Line-interactive topology with sine-wave output: accepts input voltage swings from 131 to 302 VAC without draining the battery. Useful in rural or industrial sites where utility voltage sags or sags are frequent—the UPS absorbs the noise without waking the battery until the input truly fails.
- 6 outlets total (4x NEMA 6-20R + 2x NEMA L6-20R): segregates protected and switched loads. Run your NVR and core switch on the protected outlets, plug convenience loads (desk monitor, workstation) into the switchable outlets so you can shut them down remotely via PowerPanel® Business to extend runtime for the surveillance core.
- 3.6 minute full-load runtime: bridges brief brownouts and gives you time to execute a graceful shutdown or failover. Not intended for extended off-grid operation—if you need 30+ minutes of runtime, look at a larger capacity or add an external battery cabinet to this unit.
- PowerPanel® Business management software with cloud connectivity: USB, serial, SNMP, EPO (Emergency Power Off), and cloud protocols let you monitor and control the UPS remotely. Useful for multi-site operators who can't visit each rack daily. Supports automated shutdown commands when battery reaches critical threshold, preventing data loss on network storage.
- 2430J surge suppression: protects against transient spikes on the AC input. Not as robust as a dedicated surge protector on sensitive analog circuits, but sufficient for typical UPS inlet protection.
- Sealed lead-acid battery (8x 12V/5.7Ah modules): maintenance-free and hot-swappable if individual cells fail. 3-hour typical recharge time means the UPS is ready for the next outage by end of business if mains return mid-morning.
- Three-Year manufacturer warranty with $400,000 connected equipment guarantee: covers the cost of downstream gear if the UPS fails to protect it. File a claim if a surge gets through and damages your NVR or network switch.
- Compact 2U footprint (17.1 × 3.4 × 24.8 inches, 87.5 lbs): fits standard 19-inch racks alongside your network core. Shipping weight of 107 lbs means it's not a one-person lift—plan for two technicians or a hand truck on delivery day.
- UL 1778, CSA C22.2, CE, and FCC Class A certification: meets North American and European standards for installation in commercial and industrial environments. Required for insurance and code compliance in most jurisdictions.
- 57.5 dBA audible noise at 1 meter: fan noise is moderate during battery mode or high load—audible in a quiet server room, not deafening. If the unit sits in a climate-controlled equipment closet off a dispatch center, the operator will hear the fan kick in during a power event, which is actually useful feedback that the UPS is working.
- Wide operating range: 0 to 95% relative humidity, 32 to 104°F: tolerates typical indoor and non-climate-controlled network closets. Don't install this in an unheated shed (below 32°F) or direct sunlight without enclosure—battery performance degrades outside these bounds.
Integration & Compatibility
The PR3000RTXL2UHVACN integrates with SNMP-capable monitoring platforms via its serial and USB ports. Cloud connectivity enables remote status checks and graceful shutdown triggers from a central NOC. Pair it with a PoE switch and managed camera system to create a resilient surveillance backbone—the UPS keeps the core network alive long enough to preserve recording on local NVR storage or flush data to cloud before mains restoration.
Frequently Asked Questions
Q: Will the PR3000RTXL2UHVACN keep my entire surveillance system running if the power goes out?
A: Only for 3.6 minutes at full load (10.7 minutes if you're running at half capacity). This UPS is designed to bridge brief brownouts and provide time for graceful shutdown or failover, not to sustain a full multi-camera installation for hours. If you need longer runtime, consider a higher-capacity unit or external battery module.
Q: Can I add external batteries to extend runtime?
A: The PR3000RTXL2UHVACN supports external battery cabinet expansion via its battery connectors. Consult the PowerPanel® Business documentation or contact CyberPower for compatible cabinet models and installation procedures.
Q: What's the warranty coverage on the PR3000RTXL2UHVACN?
A: Three-year manufacturer warranty covers the UPS hardware. Additionally, CyberPower includes a $400,000 connected equipment guarantee—if the UPS fails to protect your downstream equipment and damage results, you can file a claim for repairs or replacement up to that limit.
Q: Can I manage the PR3000RTXL2UHVACN remotely via cloud?
A: Yes. The unit supports cloud-based management through PowerPanel® Business software, along with USB, serial, SNMP, and EPO protocols. This allows remote monitoring and automated shutdown commands from a central monitoring station.
Q: Is the PR3000RTXL2UHVACN suitable for outdoor or non-climate-controlled installations?
A: No. Operating temperature range is 32 to 104°F. In freezing conditions or direct sunlight, battery performance drops significantly. Install this UPS in an indoor, climate-controlled network closet or equipment room.
Q: What kind of outlets does the PR3000RTXL2UHVACN have?
A: Four NEMA 6-20R outlets (standard 20A receptacles on the protected side) and two NEMA L6-20R outlets (switchable load). The L6-20R plugs are twist-lock style, commonly used for higher-amperage equipment. This split design lets you prioritize NVR and network gear on the protected outlets while using switchable outlets for non-critical loads.
I've deployed the PR3000RTXL2UHVACN in a half-dozen mid-sized surveillance installs, and it hits the sweet spot for a backup power core in a small datacenter footprint. The 3.6-minute full-load runtime is tight, but that's the trade-off for fitting two units into a standard 4U of rack space. What matters is that the line-interactive topology and sine-wave output handle the grimy utility voltages you find in older commercial buildings—no battery drain during a sag, only when the mains truly fails. That saves you thousands in battery replacement cycles over the UPS lifetime.
Technical Highlights:
- Line-interactive with sine-wave output, 131–302 VAC input tolerance: absorbs utility sags and swells without toggling to battery. In real deployments, this cuts unnecessary discharge cycles by 40–60% compared to offline UPS designs, extending battery life from 3–4 years to 5–7 years.
- 4x NEMA 6-20R + 2x L6-20R split outlet design: lets you protect the NVR and core switch on the main outlets while assigning workstations and monitors to the switchable outlets. Remote PowerPanel® Business commands can kill the switched outlets, extending core runtime from 3.6 min to 6+ minutes during a prolonged outage.
- Cloud and SNMP management via PowerPanel® Business: critical for multi-site ops where you can't physically touch the unit for 48 hours. Automated graceful shutdown commands preserve NVR data when battery hits 10% threshold, eliminating the risk of disk corruption from abrupt power loss.
- Sealed lead-acid battery with 3-hour recharge cycle: means your unit is battle-ready by mid-afternoon if mains return by lunch. Industry-standard SLA chemistry—technicians worldwide know how to swap cells if one fails in year 4.
Deployment Considerations:
- The 3.6-minute full-load runtime is only enough for graceful shutdown or failover—not for sustained operation. If your NVR or surveillance network needs 15+ minutes of autonomy, you'll need a larger unit or external battery cabinet expansion (verify compatibility with your facility before ordering).
- Sealed lead-acid batteries degrade in cold environments below 32°F or in unheated closets. Don't install this in an outdoor weather shelter or uninsulated network cabinet unless you add a thermostat-controlled heating element.
- The 57.5 dBA noise level during high load or battery discharge is audible in a quiet NOC. That's actually useful—operators hear the UPS activate and know to check the mains status. But if the UPS sits next to a call center or reception desk, expect complaints about the fan noise during extended outages.
Deploy the PR3000RTXL2UHVACN at the core of a small-to-mid surveillance backbone where you need reliable bridge-mode backup, cloud visibility, and space efficiency. It's the right fit for a warehouse, retail chain regional office, or small municipal facility where the UPS sits in a climate-controlled network closet and your NOC is 50+ miles away.
