Panduit PUP6C04RD-ULP Cat6 Plenum Bulk Cable - 1000 ft Red

The Panduit PUP6C04RD-ULP delivers 1000 feet of Cat6 plenum-rated bulk cable in a red UTP jacket, purpose-built for commercial structured cabling installations in air-handling spaces. This 23 AWG solid copper cable meets CMP flammability requirements under NEC Article 770, making it code-compliant for above-ceiling and HVAC plenum routing where smoke propagation is a fire-safety concern. The unshielded twisted-pair (U/UTP) construction balances cost and performance for standard enterprise networks, while the red jacket provides instant visual identification for dedicated network segments—surveillance VLANs, security systems, or building-automation networks that require physical separation from general data infrastructure.

Key Features

• CMP plenum rating for air-handling space compliance per NEC Article 770
• 23 AWG solid bare copper conductors for permanent installations and reliable punch-down terminations
• U/UTP construction supports 1000BASE-T Gigabit Ethernet and PoE/PoE+ (IEEE 802.3af/at) up to 90 meters
• 1000-foot pull box matches industry-standard horizontal cabling runs with slack allowance
• Red jacket color-coding for security, surveillance, or VLAN-segregated network identification
• Pan-Net® sub-brand backed by Panduit's structured cabling performance standards

The PUP6C04RD-ULP uses 23 AWG solid bare copper conductors in an unshielded twisted-pair geometry, delivering the electrical characteristics required for Category 6 channel performance up to 250 MHz. Solid conductors are the correct choice for permanent horizontal cabling: they provide lower DC resistance than stranded equivalents (critical for PoE power delivery), maintain stable geometry when terminated onto 110-style punch-down blocks or keystone jacks, and meet TIA-568 specifications for fixed building infrastructure. The U/UTP construction (four unshielded pairs with no overall foil or braid) works in most commercial environments where external electromagnetic interference is minimal—office buildings, retail spaces, schools, light industrial facilities. If your site has heavy motor loads, high-frequency RF sources, or proximity to power distribution, consider Panduit's F/UTP or S/FTP shielded variants instead; for standard IP camera, access control, and network switch uplinks in typical commercial settings, U/UTP offers the best cost-to-performance ratio. The plenum (CMP) jacket is a low-smoke, low-flame-spread compound tested to UL 910 and NFPA 262 standards. When installed in air-handling spaces—drop ceilings used for return air, HVAC plenums, or any area where cable is exposed to building airflow—plenum-rated cable is required by the National Electrical Code to prevent toxic fumes from circulating during a fire. Non-plenum (CMR riser or CM general-purpose) cables are prohibited in these spaces; using the wrong cable type is a code violation that fails inspections and creates liability. The CMP jacket on the PUP6C04RD-ULP ensures compliance in the majority of commercial low-voltage installations, where above-ceiling routing is the norm.

The 1000-foot length is the industry-standard pull-box size for horizontal cabling runs. TIA-568 limits permanent link length to 90 meters (295 feet) to allow for patch cords and maintain channel performance; a 1000-foot box provides enough cable for three full-length runs with slack for dressing, service loops, and future moves/adds/changes. For IP surveillance deployments, this translates to roughly three camera home-runs from an IDF closet to perimeter locations, or five to six runs for interior cameras on shorter paths. The red jacket is a practical differentiator: it allows installers and facility managers to instantly distinguish security/surveillance network cables from blue or gray data cables during troubleshooting, adds, or MAC work. Many integrators assign red to dedicated security VLANs (cameras, access control, intercoms), reserving other colors for voice, data, and building automation. This visual segmentation reduces the risk of accidental cross-connects and simplifies documentation—critical when you're managing hundreds of drops across multiple IDFs. The solid 23 AWG conductors also enable full PoE+ (30W per port, IEEE 802.3at) delivery at maximum channel length, powering PTZ cameras, multi-sensor devices, and PoE-powered switches without voltage drop issues that plague thinner 24 AWG cables.

The PUP6C04RD-ULP is third-party verified to meet or exceed TIA-568-C.2 Category 6 performance specifications and is UL listed under the plenum (CMP) flammability standard. Panduit's Pan-Net cable family is manufactured under ISO 9001 quality controls and carries the manufacturer warranty, providing recourse if the cable fails to meet published electrical specs or exhibits jacket defects. For commercial security integrators running permanent infrastructure in office towers, hospitals, schools, or retail centers, this combination of plenum compliance, Category 6 bandwidth, PoE support, and color-coded identification makes the PUP6C04RD-ULP a practical choice for surveillance and access-control network backbones that must pass inspection and perform reliably over 10+ year service lives.