Panduit PUP6C04RD-WLPZ Cat 6 Plenum Bulk Cable
Panduit PUP6C04RD-WLPZ delivers 1000 feet of Cat 6 plenum-rated bulk cable engineered for commercial IP camera and access control installations where circuit color-coding and air-handling space compliance are non-negotiable. The red jacket provides instant visual identification during multi-circuit pulls, eliminating the miswiring and troubleshooting delays that cost integrators billable hours on job sites with dozens of camera drops. CMP plenum certification meets NEC Article 770 and IBC Chapter 8 requirements for installation in spaces used for environmental air movement—the ducts, plenums, and above-ceiling voids where PVC-jacketed cable is prohibited. 23 AWG solid bare copper conductors and U/UTP construction deliver the 100-meter channel performance IP surveillance networks depend on, supporting PoE, PoE+, and PoE++ power delivery alongside 1000BASE-T Ethernet to cameras, intercoms, and edge devices.
Key Features
- 1000 ft bulk spool reduces mid-run splices and maintains pull-through efficiency on large camera arrays and multi-floor access control installations
- CMP plenum rating allows installation in air-handling spaces without costly conduit or alternative routing, streamlining ceiling-grid and HVAC-adjacent camera drops
- Red jacket color enables instant circuit identification during installation and service calls, critical for integrators managing parallel data, video, and access control circuits in shared pathways
- 23 AWG solid copper conductors support full 100-meter PoE++ (802.3bt Type 4) reach to high-power PTZ and multi-sensor cameras without voltage drop compromises
- U/UTP (unshielded twisted pair) construction balances cost and performance for IP camera environments where external EMI is controlled and shielded cable premiums are unnecessary
- 550 MHz bandwidth headroom accommodates future network speed increases and supports 10GBASE-T over shorter distances for NVR uplinks and backbone segments
Plenum-rated cabling is the baseline specification for commercial security installations where above-ceiling camera drops pass through spaces designated for HVAC air return. Standard PVC-jacketed cable releases toxic smoke and corrosive hydrogen chloride gas during fire events; plenum-rated jackets use fluoropolymer compounds that self-extinguish and produce minimal smoke, protecting building occupants and meeting fire marshal inspection requirements. The CMP designation—Plenum Communications Cable—is the highest flame and smoke rating in NEC Article 800, superseding CMR (riser) and CMG (general purpose) cable in the installation hierarchy. Integrators working under commercial electrical permits cannot substitute non-plenum cable in plenum spaces without code violations and failed inspections, making CMP certification a hard requirement, not a spec-sheet nicety.
The 23 AWG solid conductor gauge balances mechanical strength during pulls with DC resistance suitable for PoE power delivery across the full 100-meter channel length. Solid conductors—versus stranded—are the correct choice for permanent infrastructure: they terminate more reliably in punch-down blocks and keystones, maintain lower DC resistance for PoE applications, and withstand the tension forces applied during cable pulls through conduit and J-hooks. The U/UTP construction (unshielded, with twisted pairs but no overall foil or braid shield) is appropriate for IP camera installations in commercial buildings where power wiring and data cabling follow separated pathways per NEC guidelines. Shielded cable adds cost and requires continuous grounding across every termination point; unshielded cable eliminates ground-loop paths and simplifies field terminations without sacrificing crosstalk performance in typical surveillance environments.
Red jacket color-coding is a field-proven strategy for reducing service-call time and preventing commissioning errors on projects with multiple circuit types converging in shared cable trays. Integrators commonly assign red to IP video, blue to access control, yellow to intercom or paging, and gray to data networking—the visual differentiation allows technicians to trace circuits without a toner, identify the correct home-run during adds and moves, and verify that camera circuits are landing on the correct PoE switch ports during cutover. The 1000 ft bulk spool format reduces the number of mid-run splices required on large installations and allows integrators to cut custom lengths for irregular camera-to-IDF distances, eliminating the waste and excess coiling associated with fixed-length patch cords. Pan-Net copper systems are designed and tested as a cohesive channel: pairing this bulk cable with Panduit jacks, patch panels, and field-test procedures ensures the installed channel meets TIA-568.2-D Cat 6 performance requirements and supports manufacturer channel certification when required by end-client specifications or warranty programs.
