Panduit PUP6C04BL-WLPZ Pan-Net Cat6 Plenum-Rated UTP Cable - 1000 ft Black
The Panduit PUP6C04BL-WLPZ delivers Category 6 performance in a plenum-rated jacket built for commercial security and network infrastructure. This 1000-foot pull box of 23 AWG solid copper U/UTP cable supports 10GBASE-T Ethernet and PoE++ delivery to IP cameras, access control readers, and networked devices installed in air-handling spaces. The CMP fire rating meets National Electrical Code Article 800 requirements for plenum environments, and the unshielded twisted-pair construction provides cost-effective performance for horizontal cable runs where external EMI is minimal. Integrators running surveillance systems, access control networks, or structured cabling in office buildings, hospitals, and schools rely on this cable to meet both performance and fire-safety compliance in a single pull.
Key Features
- Category 6 Performance: Tested to 550 MHz, supports 10GBASE-T Ethernet up to 55 meters and Gigabit Ethernet to 100 meters
- Plenum CMP Fire Rating: Low-smoke, flame-retardant jacket meets NEC Article 800 for installation in HVAC ducts, drop ceilings, and raised floors
- U/UTP Construction: Four unshielded twisted pairs deliver balanced performance in commercial environments without the cost premium of shielded cable
- 23 AWG Solid Copper Conductors: Meets TIA/EIA-568-C.2 termination standards for punch-down blocks, keystone jacks, and patch panels
- 1000-Foot Pull Box: Reduces mid-run splices and speeds installation on long horizontal runs between IDFs and endpoint devices
- Black Jacket: Professional appearance for exposed conduit runs, drop ceilings, and cable trays in commercial facilities
- Pan-Net Sub-Brand: Panduit's tested and certified copper systems line backed by comprehensive warranty and technical support
- PoE++ Compatible: Supports IEEE 802.3bt Type 3/4 power delivery (up to 90W) for high-power IP cameras, PTZ domes, and multi-radio access points
Category 6 cabling provides critical headroom over Cat5e in modern IP security and network deployments. While Cat5e handles Gigabit Ethernet adequately, Cat6's 550 MHz bandwidth and tighter crosstalk specifications deliver measurable performance gains when running PoE++ to power-hungry devices like 4K cameras with edge analytics, multi-sensor panoramic domes, or PTZ units with IR illuminators. The additional conductor twist rate and pair separation reduce near-end crosstalk (NEXT) and alien crosstalk (AXT), which translates to fewer packet retransmissions and more stable power delivery under load. For integrators installing systems designed to operate for 10-15 years, Cat6 ensures the physical layer won't become the bottleneck as camera resolutions, analytics processing, and PoE power demands increase.
The plenum CMP (Communications Multipurpose Plenum) jacket is a non-negotiable requirement for cable installed in air-handling spaces governed by NEC Article 800. Plenum-rated cable uses a fluoropolymer or low-smoke PVC jacket engineered to resist flame spread and produce minimal smoke and toxic fumes during a fire. In commercial buildings where structured cabling runs through drop ceilings that double as return-air plenums, inspectors will flag non-plenum cable (CMR riser or CM general-purpose) as a code violation that must be remediated before occupancy. The PUP6C04BL-WLPZ's CMP rating eliminates that risk and allows direct installation in HVAC ducts, above suspended ceilings, and in raised-floor data centers without conduit. This speeds installation and reduces material costs compared to running riser-rated cable in metal conduit throughout the building.
Unshielded twisted-pair (U/UTP) construction balances cost and performance for the majority of commercial security and IT applications. Unlike shielded cable (F/UTP or S/FTP), U/UTP does not require grounded metallic shielding, which simplifies termination and eliminates ground-loop issues that can introduce noise or create shock hazards if building grounds are not bonded correctly. In typical office, retail, and institutional environments where cable runs avoid high-EMI sources like motor controllers, elevator shafts, and radio transmitters, U/UTP delivers the same data integrity as shielded cable at a lower installed cost. The four twisted pairs are color-coded to TIA/EIA-568-B standards (orange, green, blue, brown) for consistent termination across keystone jacks, patch panels, and field-terminated plugs.
The 23 AWG solid copper conductors meet industry standards for horizontal cabling and termination hardware. Solid conductors (as opposed to stranded) are specified for permanent links between telecommunications rooms and wall outlets because they punch down cleanly into 110-style blocks and keystone jacks without fraying, and they maintain lower DC resistance over long runs — critical for PoE power delivery. At 23 AWG, this cable strikes the optimal balance between flexibility during pulls and mechanical strength for termination. Thicker 22 AWG cable can be difficult to dress in high-density patch panels, while thinner 24 AWG cable may not meet the DC resistance budget for PoE++ at the full 100-meter channel length. Panduit's 23 AWG spec ensures compatibility with all standard keystone jacks, patch panels, and surface-mount boxes used in commercial low-voltage installations.
The 1000-foot pull box format is the professional installer's preferred package for horizontal cable runs. Most office and retail IP camera installations require cable runs between 50 and 300 feet from the IDF or network closet to the camera location. A 1000-foot box allows an installer to pull four to six camera drops without opening a second box, reducing packaging waste and minimizing the number of partial boxes left on the truck. The box includes an internal feed design that prevents tangling and kinking during pulls, and the cable pays out smoothly through cable trays, J-hooks, and tight ceiling spaces without snagging. For large projects, ordering cable by the box rather than by the foot reduces per-foot cost and ensures consistent jacket color and lot consistency across the entire installation.
Black jacket color is the integrator's choice for professional concealed installations where cable may be visible in drop ceilings, open-structure spaces, or surface-mounted conduit. While blue and gray jackets are common in datacenter and office IT environments, black cable blends into the background in retail spaces, hotels, and modern office designs with exposed ceilings. The matte black finish reduces visual clutter when cable is dressed along black cable trays, conduit, or painted surfaces, and it maintains a clean appearance in high-visibility areas where white or gray cable would stand out. The jacket material resists abrasion and UV exposure in interior environments, and it accepts cable ties, Velcro wraps, and labels without cracking or delaminating over time.
PoE++ compatibility ensures this cable supports the current and future power requirements of networked security devices. IEEE 802.3bt Type 3 (PoE+, 60W) and Type 4 (PoE++, 90W) are now standard on high-performance IP cameras with motorized varifocal lenses, multi-imager panoramic cameras, and PTZ domes with heaters and blowers for outdoor installations. These devices can draw 40-70 watts at full load, and running that power over 100 meters of cable requires low DC resistance and balanced pair geometry to stay within the voltage-drop budget. Cat6 cable's tighter twist specifications and 23 AWG conductors reduce resistance compared to Cat5e, which translates to more available power at the device and less heat buildup in the cable bundle. For integrators spec'ing systems with 4K cameras, AI analytics appliances, or high-power wireless access points, Cat6 eliminates the risk of under-powering devices at the far end of a 90-meter run.
Panduit's Pan-Net sub-brand represents the company's complete line of tested and certified copper connectivity solutions. Every Pan-Net cable is manufactured to published specifications and tested for electrical performance, flame rating, and mechanical durability before it ships. Panduit provides third-party test reports, flammability certifications, and environmental compliance documentation (RoHS, REACH) for projects that require submittals to inspectors, general contractors, or end-client engineering teams. The Pan-Net warranty covers defects in materials and workmanship, and Panduit's technical support team provides termination guidance, troubleshooting assistance, and system design consultation for integrators working on large or complex projects. This level of manufacturer support reduces project risk and ensures that cable performance won't become a finger-pointing issue if network problems arise during commissioning or operation.
The PUP6C04BL-WLPZ is the cable of choice for integrators who need code-compliant Cat6 performance in a cost-effective unshielded package. It meets the fire-safety requirements for plenum spaces, delivers the bandwidth and power-delivery headroom required for modern IP security systems, and ships in the 1000-foot professional installer format that reduces packaging waste and per-foot cost. Whether you're running horizontal cable to IP cameras in a hospital, pulling PoE++ feeds to access control readers in a school, or installing structured cabling in a datacenter raised floor, this cable provides the performance, compliance, and Panduit reliability that commercial projects demand.
