Panduit PUP6XHD04WH-G Cat6 U/UTP Plenum Cable

The Panduit PUP6XHD04WH-G delivers 1,000 feet of plenum-rated Category 6 U/UTP cable engineered for permanent horizontal backbone installations in commercial security, access control, and IP surveillance systems. This 23 AWG solid-conductor cable meets CMP flammability standards for above-ceiling and environmental-air-space deployments, ensuring compliance with NEC Article 770 and IBC Chapter 8 fire-rated pathway requirements. Designed for integrators running PoE cameras, door controllers, and intercom endpoints across multi-floor facilities, the Pan-Net construction balances mechanical durability with consistent 250 MHz performance over the full 328-foot channel length.

Key Features

• CMP plenum rating for installation in air-handling spaces without additional conduit
• 23 AWG solid bare copper conductors for permanent termination to 110-style patch panels and keystone jacks
• U/UTP (unshielded twisted pair) construction optimized for standard Ethernet and PoE/PoE+ delivery
• 1,000-foot pull box packaging reduces mid-run splices and labor on typical horizontal runs
• White PVC jacket integrates visually in drop-ceiling and wall-cavity installations
• Pan-Net sub-brand certification ensures compatibility with Panduit's Mini-Com and NetKey connector systems
• TIA-568.2-D Category 6 performance verified to 250 MHz with 55-meter reach at 10GBASE-T

The 23 AWG solid conductor construction is purpose-built for punch-down termination—each of the four twisted pairs uses bare copper conductors sized for reliable IDC (insulation-displacement contact) connections at patch panels, surface-mount boxes, and consolidation points. Unlike stranded patch cables, solid conductors maintain pair geometry under tension during pulls through conduit and J-hooks, preserving the twist rate that controls crosstalk and return loss. The U/UTP design forgoes metallic shielding, reducing cable diameter to 0.23 inches and pull weight to 24 lbs per 1,000 feet, which matters when routing multiple home-runs through crowded ceiling grids or vertical risers. The plenum jacket compound is formulated to meet UL 910 flame-spread and smoke-density limits: in the event of fire, the low-smoke FEP fluoropolymer jacket self-extinguishes without releasing halogenated gases that damage electronic equipment or obscure egress routes. This makes PUP6XHD04WH-G the code-required choice for installations above suspended ceilings used as return-air plenums—typical in office buildings, hospitals, schools, and data centers where HVAC design routes conditioned air through the ceiling cavity rather than dedicated ductwork. The white jacket color matches standard commercial ceiling tiles and drywall, maintaining a clean appearance when cables transition from concealed pathways to surface-mounted raceways at door frames or equipment closets.

Category 6 performance at 250 MHz supports 1000BASE-T Gigabit Ethernet and IEEE 802.3at PoE+ (30W per port) across the full 100-meter permanent link, sufficient for today's 4MP/5MP IP cameras, VoIP intercoms, and wireless access points. The cable also supports 10GBASE-T at distances up to 55 meters when terminated with Category 6A-rated connectors—useful for switch-to-switch backbone links within an IDF or between a network rack and a nearby NVR. Each 1,000-foot box represents roughly three typical horizontal runs in commercial construction (assuming 90-meter permanent link plus slack for dressing and service loops), reducing packaging waste and the number of mid-project material deliveries. The pull-box design includes an internal payout spool and tear-away panel, allowing controlled cable extraction without tangling or kinking during long pulls. Integrators building access-control systems will appreciate the jacket's compatibility with cable-management hardware: the 0.23-inch diameter fits standard D-rings, Panduit PanelMax vertical managers, and horizontal ladder rack without excessive bundling pressure that degrades pair balance. The Sub-Brand designation "Pan-Net" signals qualification for Panduit's 20-year system warranty when installed with Pan-Net jacks, patch panels, and patch cords—critical for projects where the engineer of record specifies end-to-end channel certification and the AHJ requires documented compliance with TIA-568 installation standards.

Unlike general-purpose riser (CMR) or CM-rated cables, this plenum variant eliminates the need for metallic conduit in air-handling spaces, reducing both material cost and the labor hours associated with EMT or flex-conduit installation. The solid-conductor format ensures compatibility with spring-loaded IDC terminals found in Panduit Mini-Com TX6A jacks, Leviton eXtreme, and Belden KeyConnect modules, all of which require 22-24 AWG solid wire to achieve the gas-tight mechanical connection that prevents oxidation over the 10-15 year service life of a structured cabling system. For large-scale deployments—such as a 200-camera retrofit across a multi-building campus—the 1,000-foot box quantity and white jacket standardization simplify inventory management and ensure visual consistency when cables are exposed in surface raceways or open-grid ceilings common in warehouses and retail back-of-house areas.