Hanwha XNV-9083R vs i-PRO S2570L: Specification Comparison
Both the Hanwha XNV-9083R and the i-PRO WV-S2570L are fixed outdoor vandal-resistant dome cameras rated at 8MP / 4K resolution, making them direct cross-shop competitors for enterprise perimeter and area surveillance deployments. This comparison evaluates each model strictly against its published specifications across imaging performance, installation and environmental suitability, and integration capabilities—giving installers and IT buyers the data needed to match the right camera to their specific site requirements.
In This Guide
How do the imaging specs compare?
The Hanwha XNV-9083R uses a 1/1.8" progressive CMOS sensor delivering 3840×2160 at up to 30fps. Its motorized varifocal lens spans 4.4–9.3mm (2.1× zoom ratio) with a maximum aperture of F1.3 at wide, and provides a horizontal field of view of 113° at wide down to 47° at tele. Minimum illumination is rated at 0.04 Lux in color mode and 0 Lux with IR active. The camera features WiseIR illumination to 50m (164ft) and extremeWDR rated at 120dB. Digital noise reduction is handled by WiseNRII (AI-based) combined with SSNRV, and a built-in gyro sensor enables digital image stabilization.
The i-PRO WV-S2570L is specified as a 4K (8MP) outdoor dome supporting H.265 encoding, but its published specifications do not include the image sensor size, lens focal length or zoom range, minimum illumination value, IR illumination range or capability, or a stated WDR dynamic range figure in dB. Buyers requiring detailed optical and low-light benchmarks for side-by-side evaluation will need to consult i-PRO's full datasheet, as those parameters are absent from the available specification set.
What about installation and environment?
The XNV-9083R carries IP66, IP67, IP6K9K, NEMA 4X, and IK10+ ratings with an operating temperature range of -50°C to +55°C (-58°F to +131°F). It accepts PoE+ (IEEE 802.3at Type 2, Class 4) or 12VDC, with a maximum power draw of 22.5W. The dome is aluminum-bodied with a hard-coated bubble, weighs 1,900g (4.19 lb), and measures ø180×125mm. Pan/tilt/rotate range is 0–360° / -45°–85° / 0–355°. Compatible conduit is 3/4" (M25) and the unit fits single, double, 4" octagon, and 4" square gangboxes.
The WV-S2570L is rated IP66 and described as stainless-construction and high-impact resistant. Its power input is listed as PoE++ (802.3bt) in product attributes, though the connector is RJ-45 and it is also noted simply as 'PoE.' Mounting options are listed as ceiling and wall. Operating temperature range, IK impact rating, physical dimensions, and weight are not stated in the available specifications for the WV-S2570L, limiting direct environmental comparison. Installers working in extreme-temperature or high-impact environments should verify these parameters with i-PRO directly.
Which fits your VMS and analytics better?
The XNV-9083R supports ONVIF Profile S, G, T, and M, plus Hanwha's native SUNAPI and Wisenet SDK. On-board AI analytics include object detection (person, face, vehicle, license plate), virtual line crossing with direction, virtual area loitering, and business intelligence functions (people counting, queue management, heatmap). Edge storage supports dual Micro SD/SDHC/SDXC slots up to 512GB each (1TB total). Audio is bidirectional: selectable mic/line input and line output. Security credentials include TPM 2.0 (FIPS 140-2 Level 2), 802.1X (EAP-TLS, EAP-LEAP, EAP-PEAP), HTTPS, and IP address filtering.
The WV-S2570L supports ONVIF Profile S, T, and G (not M), and is listed as compatible with Milestone XProtect, Genetec Security Center, and AXIS Camera Station—explicit VMS certifications not stated for the XNV-9083R in available specs. On-board analytics capabilities, edge storage options, audio input/output, and cybersecurity feature details (e.g., TPM, 802.1X) are not specified in the available WV-S2570L documentation. Buyers whose workflows depend on these capabilities should request i-PRO's full datasheet before specifying.
Which should you choose: the XNV-9083R or the S2570L?
Our take: The XNV-9083R is the stronger choice when detailed, spec-verifiable imaging performance, deep on-board AI analytics, and extreme-environment durability are decision criteria. Its 1/1.8" sensor, F1.3 wide aperture, 0 Lux IR floor, and 120dB extremeWDR are documented figures that directly support low-light and high-contrast scene requirements; the WV-S2570L provides none of these values in its available spec set. The XNV-9083R also adds a second edge-storage slot (up to 1TB total), ONVIF Profile M (metadata), TPM 2.0 / FIPS 140-2 Level 2 security, and a confirmed -50°C to +55°C operating range—versus unspecified equivalents on the S2570L. However, if your VMS is Milestone, Genetec, or AXIS Camera Station and you require a published compatibility certification rather than ONVIF interoperability alone, the WV-S2570L carries those explicit listings. Verify i-PRO's full datasheet before ruling it out.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha XNV-9083R | i-PRO S2570L |
|---|---|---|
| Resolution | 3840×2160 (8MP / 4K) | 4K (8MP) |
| Image Sensor | 1/1.8" progressive CMOS | — |
| Lens / Focal Length | 4.4–9.3mm motorized varifocal (2.1×) | — |
| Max Aperture | F1.3 (Wide) / F2.15 (Tele) | — |
| Horizontal FoV | 113° (Wide) / ~47° (Tele) | — |
| Min. Illumination | 0.04 Lux color / 0 Lux IR | — |
| IR Illumination Range | 50m (164ft) WiseIR | — |
| WDR | 120dB extremeWDR | — |
| Max Frame Rate | 30fps @ 8MP | — |
| Video Compression | H.265 / H.264 / MJPEG | H.265 / H.264 |
| IP Rating | IP66 / IP67 / IP6K9K / NEMA 4X | IP66 |
| IK / Impact Rating | IK10+ | High-impact (no IK number stated) |
| Operating Temperature | -50°C to +55°C | — |
| Power Input / PoE Class | PoE+ (802.3at) Class 4 / 12VDC; Max 22.5W | PoE++ (802.3bt) / PoE+ |
| ONVIF Profiles | S / G / T / M | S / T / G |
| VMS Certifications | — | Milestone XProtect; Genetec Security Center; AXIS Camera Station |
| On-Board AI Analytics | Object detection, line crossing, loitering, people counting, heatmap, queue mgmt | — |
| Edge Storage | Dual Micro SD/SDHC/SDXC; up to 1TB (512GB × 2) | — |
| Audio | Bidirectional (mic/line in; line out) | — |
| Cybersecurity | TPM 2.0 (FIPS 140-2 L2), 802.1X, HTTPS, IP filtering | — |
| Dimensions | ø180×125mm (ø7.09×4.92") | — |
| Weight | 1,900g (4.19 lb) | — |
| Warranty | 3-year | — |
Frequently Asked Questions
Which should you choose: the XNV-9083R or the S2570L?
The XNV-9083R is the stronger choice when detailed, spec-verifiable imaging performance, deep on-board AI analytics, and extreme-environment durability are decision criteria. Its 1/1.8" sensor, F1.3 wide aperture, 0 Lux IR floor, and 120dB extremeWDR are documented figures that directly support low-light and high-contrast scene requirements; the WV-S2570L provides none of these values in its available spec set. The XNV-9083R also adds a second edge-storage slot (up to 1TB total), ONVIF Profile M (metadata), TPM 2.0 / FIPS 140-2 Level 2 security, and a confirmed -50°C to +55°C operating range—versus unspecified equivalents on the S2570L. However, if your VMS is Milestone, Genetec, or AXIS Camera Station and you require a published compatibility certification rather than ONVIF interoperability alone, the WV-S2570L carries those explicit listings. Verify i-PRO's full datasheet before ruling it out.
Is the XNV-9083R or WV-S2570L better for low-light performance?
Based on available specifications, only the XNV-9083R provides low-light data: 0.04 Lux in color mode and 0 Lux with IR active, backed by 50m WiseIR illumination. The WV-S2570L does not publish minimum illumination or IR range figures in its available spec set, so a direct comparison cannot be made from specifications alone.
Which camera has better vandal resistance—the XNV-9083R or the WV-S2570L?
The XNV-9083R carries an IK10+ rating per IEC/EN 62262, which exceeds the standard IK10 threshold. The WV-S2570L is described as 'high-impact' resistant with a stainless construction, but no IK impact rating number is stated in its available specifications. Installers requiring a certified IK rating for compliance purposes should note that only the XNV-9083R provides one in available documentation.
Do both cameras work with Milestone and Genetec VMS platforms?
The WV-S2570L explicitly lists Milestone XProtect and Genetec Security Center as compatible VMS platforms in its available specifications. The XNV-9083R does not list those platforms by name, but supports ONVIF Profile S/G/T/M and Hanwha's SUNAPI—both Milestone and Genetec support ONVIF, so functional integration is likely, but formal certification is not stated for the XNV-9083R in the provided spec data.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.