Hanwha XNV-9083R vs i-PRO S85402-V2L: Specification Comparison
Both the Hanwha XNV-9083R and the i-PRO WV-S85402-V2L are 8MP outdoor fixed dome cameras with IR illumination, PoE+, IK10 impact resistance, and ONVIF compliance, aimed at installers and IT buyers who need high-resolution vandal-resistant surveillance. The Hanwha is a single-sensor 4K dome; the i-PRO is a dual-sensor design delivering 8MP combined from two 4MP sensors. This comparison examines imaging performance, physical installation, and VMS/analytics integration across both platforms using only published specifications.
In This Guide
How do the imaging specs compare?
The XNV-9083R uses a single 1/1.8" progressive CMOS sensor at 3840×2160 (true 4K) with a maximum aperture of F1.3 at wide, minimum illumination of 0.04 Lux color and 0 Lux in IR mode, and extremeWDR rated at 120dB. Its 2.1× motorized varifocal lens spans 4.4–9.3mm with a 113° horizontal field of view at wide. WiseIR extends IR coverage to 50m. DORI identify distance reaches 17.7m at tele. The WV-S85402-V2L pairs two 1/2.7" CMOS sensors, each at 2688×1520 (4MP), for 8MP combined. Minimum illumination is 0.12 Lux (BW with IR LED), aperture is F2.0 at wide, and Super Dynamic WDR tops out at 108dB. The 2.5× optical zoom spans 2.9–7.3mm, with a 100° horizontal FOV at wide. IR range is rated at 40m in high mode. DORI identify at tele reaches 13.6m.
On noise reduction, the XNV-9083R employs AI-based WiseNR II and SSNR V, with built-in gyro-based digital image stabilization — a feature not listed for the WV-S85402-V2L. The i-PRO camera is powered by an Ambarella CV2 SoC and adds an extra digital zoom to 10.5× at 640×360, while the Hanwha's zoom tops at 2.1× optical with no digital zoom spec published. The XNV-9083R also lists lens distortion correction (LDC) and defog as discrete supported features; the i-PRO lists fog compensation (level 0–8) and adaptive black stretch (0–255) as distinct controls.
What about installation and environment?
Both cameras carry IP66/IP67 and NEMA 4X ratings and IK10 impact resistance. The XNV-9083R adds IP6K9K (ISO 20653) and its IK10 rating is specified as IK10+, indicating a margin above the standard. The i-PRO WV-S85402-V2L adds a wind resistance rating of up to 40 m/s (~89 mph) and NEMA TS 2 (2.2.7–2.2.9) compliance for traffic applications — neither is listed for the Hanwha. The i-PRO also specifies a Temish anti-condensation element; the XNV-9083R does not list an equivalent.
The XNV-9083R operates from -50°C to +55°C (storage to +60°C) and draws up to 22.5W via PoE+ (IEEE 802.3at, Class 4) or 12VDC. The WV-S85402-V2L operates from -40°C to +60°C (power-on from -20°C) at up to 22.2W via PoE+. The Hanwha's lower cold-start threshold (-50°C vs -20°C power-on for the i-PRO) is a material advantage in extreme-cold environments. Physically, the XNV-9083R is a round dome (ø180×125mm, 1900g) with a 3/4" M25 conduit entry; the i-PRO is a rectangular multi-sensor body (250×150×105mm, ~1800g). The i-PRO's dual-sensor geometry allows independent channel aiming (H -50° to +230°, V +10° to +105°, Yaw ±90°) versus the Hanwha's single-dome pan/tilt/rotate adjustment.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile S/G/T/M. The XNV-9083R adds SUNAPI and Wisenet SDK and lists a full protocol stack including SNMPv1/v2c/v3, MQTT, SRTP, LLDP, CDP, and IPv6. The i-PRO provides FIPS 140-2 Level 3 security — one level above the XNV-9083R's TPM 2.0 at FIPS 140-2 Level 2. The i-PRO also documents signed firmware; the Hanwha does not list this in its published specs. Both support 802.1X and HTTPS.
For edge analytics, the XNV-9083R lists AI object detection covering person, face, vehicle, and license plate; vehicle attribute classification (car, bus, truck, motorcycle, bicycle); virtual line crossing with direction; virtual area; DetectionShot; and business intelligence functions including people counting, queue management, and heatmap — all edge-resident. The i-PRO lists six AI video analytics types without enumerating them individually in the provided specs, plus AI sound classification covering gunshot, yell, vehicle horn, and glass break — the latter being a differentiator not listed for the Hanwha. On storage, the XNV-9083R provides two microSD slots supporting up to 512GB each (1TB total); the i-PRO specifies a single microSD slot up to 512GB. Audio inputs differ: the Hanwha offers one selectable mic/line input; the i-PRO provides three 3.5mm stereo jack mic inputs and supports full-duplex audio. The i-PRO has 3 alarm I/O terminals versus 2 on the Hanwha.
Which should you choose: the XNV-9083R or the S85402-V2L?
Our take: The XNV-9083R is the stronger choice when a single-sensor 4K image stream, superior low-light performance, and richer onboard AI analytics are the primary requirements; the WV-S85402-V2L is the better fit when dual-sensor field coverage, traffic-rated environmental compliance, or AI sound classification are needed. On imaging, the Hanwha's 1/1.8" sensor and F1.3 aperture achieve 0.04 Lux versus the i-PRO's 0.12 Lux at F2.0 — a 3× sensitivity advantage per published specs. WDR is 120dB on the Hanwha versus 108dB on the i-PRO. IR range is 50m versus 40m. For cold-climate installs, the Hanwha cold-starts at -50°C versus the i-PRO's -20°C power-on floor. The i-PRO counters with FIPS 140-2 Level 3 cryptographic security, NEMA TS 2 traffic compliance, 40 m/s wind resistance certification, dual-sensor independent aiming, three mic inputs, and AI sound classification — advantages that matter most in transportation, critical-infrastructure, and multi-zone coverage deployments on an i-PRO-integrated VMS.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha XNV-9083R | i-PRO S85402-V2L |
|---|---|---|
| Camera Type | Single-sensor fixed dome | Dual-sensor fixed dome |
| Resolution | 3840×2160 (8MP, single sensor) | 2688×1520 per sensor (4MP×2, 8MP combined) |
| Sensor Size | 1/1.8" CMOS | 2× 1/2.7" CMOS |
| Min. Illumination | 0.04 Lux color / 0 Lux IR | 0.12 Lux (BW, IR LED) |
| Max. Aperture (Wide) | F1.3 | F2.0 |
| WDR | extremeWDR 120dB | Super Dynamic 108dB |
| IR Range | 50m (WiseIR) | 40m (High mode) |
| Focal Length | 4.4–9.3mm (2.1× optical) | 2.9–7.3mm (2.5× optical) |
| H. Field of View | 113° (wide) – ~47° (tele) | 100° (wide) – 43° (tele) |
| DORI Identify (Tele) | 17.7m | 13.6m |
| Operating Temp | −50°C to +55°C | −40°C to +60°C (power-on: −20°C) |
| IP / Impact Rating | IP66/IP67/IP6K9K, IK10+, NEMA 4X | IP66/IP67, IK10, NEMA 4X |
| Wind Resistance | — | 40 m/s (~89 mph) |
| FIPS Security Level | FIPS 140-2 Level 2 (TPM 2.0) | FIPS 140-2 Level 3 |
| Edge Storage | 2× microSD, up to 1TB total (512GB×2) | 1× microSD, up to 512GB |
| Alarm I/O Terminals | 2 | 3 |
| Audio Inputs | 1× mic/line selectable | 3× 3.5mm stereo jack mic |
| AI Sound Classification | — | Gunshot, Yell, Vehicle horn, Glass break |
| Power Input / PoE Class | IEEE 802.3at Type 2, Class 4 — 22.5W max | IEEE 802.3at — 22.2W max |
| Warranty | 3-year | 3-year |
Frequently Asked Questions
Which should you choose: the XNV-9083R or the S85402-V2L?
The XNV-9083R is the stronger choice when a single-sensor 4K image stream, superior low-light performance, and richer onboard AI analytics are the primary requirements; the WV-S85402-V2L is the better fit when dual-sensor field coverage, traffic-rated environmental compliance, or AI sound classification are needed. On imaging, the Hanwha's 1/1.8" sensor and F1.3 aperture achieve 0.04 Lux versus the i-PRO's 0.12 Lux at F2.0 — a 3× sensitivity advantage per published specs. WDR is 120dB on the Hanwha versus 108dB on the i-PRO. IR range is 50m versus 40m. For cold-climate installs, the Hanwha cold-starts at -50°C versus the i-PRO's -20°C power-on floor. The i-PRO counters with FIPS 140-2 Level 3 cryptographic security, NEMA TS 2 traffic compliance, 40 m/s wind resistance certification, dual-sensor independent aiming, three mic inputs, and AI sound classification — advantages that matter most in transportation, critical-infrastructure, and multi-zone coverage deployments on an i-PRO-integrated VMS.
Is the XNV-9083R or WV-S85402-V2L better for low-light performance?
The XNV-9083R has a published minimum illumination of 0.04 Lux in color mode (0 Lux in IR) versus 0.12 Lux for the WV-S85402-V2L, and its F1.3 maximum aperture is wider than the i-PRO's F2.0. On published specs, the Hanwha has a measurable low-light advantage.
Which camera covers more physical area?
The WV-S85402-V2L is a dual-sensor camera whose two independent lenses can be aimed across a wider combined zone (H -50° to +230°, Yaw ±90° per channel), making it better suited to covering intersections or L-shaped corridors. The XNV-9083R is a single-sensor dome with up to 113° horizontal FOV, better suited to a single focused zone.
Does either camera support on-board storage redundancy?
The XNV-9083R provides two microSD card slots supporting up to 512GB each (1TB combined), which allows mirrored or extended local recording. The WV-S85402-V2L specifies a single microSD slot up to 512GB, with no dual-slot redundancy listed in its published specifications.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.