Hanwha QNV-6012R vs i-PRO X35302-F2L: Specification Comparison
Both the Hanwha QNV-6012R and the i-PRO WV-X35302-F2L are 2MP fixed outdoor vandal dome IP cameras aimed at perimeter and general surveillance installations. They share the same physical form factor, PoE power delivery, IP66/IK10 environmental ratings, and ONVIF compliance, making them genuine cross-shop candidates for integrators evaluating entry-to-mid-tier outdoor domes. The comparison covers imaging performance, environmental and installation characteristics, and VMS/analytics integration depth.
In This Guide
How do the imaging specs compare?
Both cameras use an approximately 1/2.8-inch CMOS sensor and shoot at 2MP, but their output resolutions differ: the QNV-6012R delivers 1920×1080 (16:9 Full HD) while the WV-X35302-F2L outputs 2048×1536 (4:3 aspect), giving the i-PRO slightly more vertical pixel coverage for scenes that benefit from taller framing. Low-light performance edges toward i-PRO at 0.02 lux color versus 0.03 lux color for the Hanwha; both reach 0 lux with IR active. WDR is a clear differentiator: i-PRO specifies 144 dB Super Dynamic (with level adjustment 0–31), versus 120 dB for the Hanwha — a 24 dB advantage that matters in high-contrast entryways and loading docks.
IR reach also favors the i-PRO: 21 m at 30 IRE versus the Hanwha's 20 m, a marginal real-world difference. Lens focal length diverges — 2.8 mm (F2.0) on the QNV-6012R versus 2.4 mm (F2.1) on the WV-X35302-F2L — giving the i-PRO a wider 132° horizontal field of view compared to the Hanwha's 114° horizontal. The Hanwha specifies a fixed 30 fps at 2MP; i-PRO lists a variable frame rate with a maximum shutter of 1/10000 s but does not publish a fixed maximum fps figure in the provided spec sheet. Hanwha's WiseStream II smart codec contrasts with i-PRO's GOP-control-based smart coding; both support H.265 and H.264 with VBR/CBR modes.
What about installation and environment?
Both cameras carry IP66 and IK10 ratings, confirming dust-tight, jet-water-resistant, and vandal-resistant enclosures. The i-PRO adds NEMA 4X and Type 4X (UL50E) certifications, relevant for US industrial and utility installations requiring UL-listed enclosures. The WV-X35302-F2L also holds railway/vehicle certifications (EN50155, JIS E5006, IEC62236, EN50121) and a wind resistance rating up to 40 m/s (~89 mph), neither of which appears in the Hanwha spec sheet.
Operating temperature range is a meaningful gap: the i-PRO is rated -40°C to +60°C (power-on: -20°C to +60°C), while the Hanwha is rated -30°C to +55°C — the i-PRO extends 10°C lower and 5°C higher. PoE class also differs: the Hanwha is IEEE 802.3af Class 3 (max 7.4 W actual draw), while the i-PRO is listed as PoE Class 0 with a maximum draw of 8.6 W, meaning it draws more power and switch port budgeting should account for this. The Hanwha also accepts 12 VDC as an alternative input; the i-PRO spec sheet lists only PoE. The i-PRO is lighter and more compact (approx. 475 g, 109×53×119 mm) than the Hanwha (510 g, ø120.3×91.7 mm).
Which fits your VMS and analytics better?
Both cameras support ONVIF Profiles S, G, and T, ensuring broad VMS compatibility. The i-PRO additionally supports ONVIF Profile M, which covers metadata and analytics interoperability — relevant if your VMS consumes standardized analytics events. i-PRO's on-camera AI analytics include AI Video Motion Detection, Face Detection, and People Detection, plus AI Sound Classification (gunshot, yell, vehicle horn, glass break) tied to a built-in microphone. Hanwha's edge analytics include motion detection, tampering, defocus detection, and virtual line/area crossing — capable but without AI-classified object or sound categories per the provided specs.
Simultaneous stream support is higher on the i-PRO at up to 14 users versus the Hanwha's 6 unicast users. Edge storage maximum is 512 GB microSDXC on the i-PRO versus 128 GB on the Hanwha. Both support audio input; the i-PRO spec sheet notes a built-in microphone, while the Hanwha specifies a selectable mic/line input with 2.5 VDC bias — useful when an external mic is preferred. Security certifications differ: the i-PRO lists FIPS 140-2 Level 3, a requirement in US federal and critical infrastructure deployments, while the Hanwha provides firmware encryption, Digest Authentication, 802.1X (EAP-TLS/LEAP/PEAP), HTTPS/SRTP, and SD card partition encryption — a solid but non-FIPS-certified security posture.
Which should you choose: the QNV-6012R or the X35302-F2L?
Our take: The WV-X35302-F2L is the stronger choice when the installation demands higher WDR tolerance, wider operating temperatures, AI-classified analytics, or FIPS 140-2 Level 3 security compliance. Its 144 dB Super Dynamic WDR versus the QNV-6012R's 120 dB is a 24 dB measurable advantage in high-contrast scenes; its operating range of -40°C to +60°C extends 10°C below and 5°C above the Hanwha's -30°C to +55°C window; and its 512 GB edge storage ceiling is four times the Hanwha's 128 GB cap. The QNV-6012R is the pragmatic choice when budget, PoE Class 3 port budgeting (7.4 W vs 8.6 W), a 12 VDC alternative power option, or Hanwha/Wisenet VMS ecosystem integration are the governing factors. Both cameras are ONVIF-compliant outdoor IK10 vandal domes, but the i-PRO carries a longer 5-year warranty versus Hanwha's 3-year term — a lifecycle cost factor for large deployments.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha QNV-6012R | i-PRO X35302-F2L |
|---|---|---|
| Resolution | 1920×1080 (16:9) | 2048×1536 (4:3) |
| Image Sensor | 1/2.8" CMOS | Approx. 1/2.8" CMOS |
| Lens / Focal Length | 2.8 mm fixed, F2.0 | 2.4 mm fixed, F2.1 |
| Horizontal Field of View | 114° | 132° |
| Min. Illumination (Color) | 0.03 lux | 0.02 lux |
| Min. Illumination (IR) | 0 lux | 0 lux |
| IR Range | 20 m (65.6 ft) | 21 m at 30 IRE / 15 m at 50 IRE |
| Wide Dynamic Range | 120 dB | 144 dB (Super Dynamic, level 0–31) |
| Max Frame Rate | 30 fps @ 2MP | Variable (max shutter 1/10000 s; fps not specified) |
| Video Compression | H.265, H.264 (Main/High), MJPEG | H.265, H.264, MJPEG |
| IP Rating | IP66 | IP66, NEMA 4X, Type 4X (UL50E) |
| IK / Impact Rating | IK10 | IK10 |
| Operating Temperature | -30°C to +55°C | -40°C to +60°C (power-on: -20°C to +60°C) |
| Power Input / PoE Class | PoE IEEE 802.3af Class 3 / 12 VDC; max 7.4 W | PoE IEEE 802.3af Class 0; max 8.6 W |
| Edge Storage | microSD/SDHC/SDXC up to 128 GB | microSDXC up to 512 GB / microSDHC up to 32 GB |
| Audio | Selectable mic in / line in (2.5 VDC bias) | Built-in microphone |
| AI / Edge Analytics | Motion, tampering, defocus, virtual line/area | AI VMD, Face Detection, People Detection, AI Sound Classification |
| ONVIF Profiles | S, G, T | G, M, S, T |
| Simultaneous Users | 6 (unicast) | Up to 14 |
| Security Certifications | Firmware encryption, 802.1X, HTTPS/SRTP, SD partition encrypt | FIPS 140-2 Level 3, HTTPS, IEEE 802.1X |
| Dimensions | ø120.3 × 91.7 mm | 109 × 53 × 119 mm |
| Weight | 510 g (1.12 lb) | Approx. 475 g (1.05 lb) |
| Warranty | 3-year | 5-year |
Frequently Asked Questions
Which should you choose: the QNV-6012R or the X35302-F2L?
The WV-X35302-F2L is the stronger choice when the installation demands higher WDR tolerance, wider operating temperatures, AI-classified analytics, or FIPS 140-2 Level 3 security compliance. Its 144 dB Super Dynamic WDR versus the QNV-6012R's 120 dB is a 24 dB measurable advantage in high-contrast scenes; its operating range of -40°C to +60°C extends 10°C below and 5°C above the Hanwha's -30°C to +55°C window; and its 512 GB edge storage ceiling is four times the Hanwha's 128 GB cap. The QNV-6012R is the pragmatic choice when budget, PoE Class 3 port budgeting (7.4 W vs 8.6 W), a 12 VDC alternative power option, or Hanwha/Wisenet VMS ecosystem integration are the governing factors. Both cameras are ONVIF-compliant outdoor IK10 vandal domes, but the i-PRO carries a longer 5-year warranty versus Hanwha's 3-year term — a lifecycle cost factor for large deployments.
Is the QNV-6012R or WV-X35302-F2L better for low-light performance?
The WV-X35302-F2L has a slight edge at 0.02 lux color minimum illumination versus 0.03 lux for the QNV-6012R. Both cameras reach 0 lux with IR active. The i-PRO also specifies a longer IR range of 21 m at 30 IRE compared to the Hanwha's 20 m, though that 1 m difference is negligible in practice. For high-contrast scenes with bright backgrounds — such as backlit entrances — the i-PRO's 144 dB WDR (versus 120 dB) is the more impactful low-light-adjacent advantage.
Can either camera operate in extreme cold or heat, such as outdoor northern climates or rooftop installations?
The i-PRO WV-X35302-F2L is rated for ambient operation from -40°C to +60°C (with power-on startup requiring -20°C or warmer), making it suitable for harsh northern climates. The Hanwha QNV-6012R is rated -30°C to +55°C — adequate for most temperate outdoor installations but not rated for arctic-level cold or the same upper heat threshold. If the deployment site experiences temperatures below -30°C, the i-PRO is the only specified option of the two.
Do both cameras work with standard ONVIF VMS platforms, and does either offer deeper analytics integration?
Both cameras support ONVIF Profiles S, G, and T, ensuring compatibility with the broad range of ONVIF-compliant VMS platforms. The i-PRO WV-X35302-F2L additionally supports ONVIF Profile M, which standardizes metadata and analytics event delivery to the VMS — relevant if your platform consumes AI analytics events (face, people, motion) via ONVIF. The Hanwha QNV-6012R supports Hanwha's SUNAPI (HTTP API) and Wisenet open platform for deeper integration with Wisenet WAVE or compatible VMS products. The i-PRO's on-camera AI Sound Classification (gunshot, yell, glass break, vehicle horn) has no equivalent listed in the Hanwha specs.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.