Hanwha QND-6012R1 vs i-PRO X35302-F2L: Specification Comparison
Both the Hanwha QND-6012R1 and the i-PRO WV-X35302-F2L are 2MP fixed-lens IP dome cameras aimed at the commercial surveillance market. The Hanwha is an indoor-rated unit with a 2.8mm lens and 20m IR, while the i-PRO is an outdoor-hardened model with IP66/IK10 ratings, a 2.4mm lens, and AI-enhanced analytics. This comparison covers imaging performance, installation and environmental suitability, and VMS/analytics integration to help integrators and IT buyers allocate each unit to the right application.
In This Guide
How do the imaging specs compare?
Both cameras share a 1/2.8-inch 2MP CMOS sensor, but differ meaningfully in dynamic range and resolution output. The Hanwha QND-6012R1 delivers 1920×1080 at up to 30fps with 120dB WDR via its SSDR/BLC/WDR stack, and achieves minimum illumination of 0.03 Lux (color) / 0 Lux (IR). The i-PRO WV-X35302-F2L outputs 2048×1536—a higher pixel count despite the same sensor class—at a variable frame rate, with Super Dynamic rated at 144dB maximum (at Level 31) and a slightly better low-light floor of 0.02 Lux (color) / 0 Lux (B&W+IR).
On IR reach, the i-PRO specifies 21m at 30IRE / 15m at 50IRE, while the Hanwha specifies 20m without a stated IRE reference. Lens field of view differs: the Hanwha's 2.8mm fixed lens provides 113.7° horizontal, versus the i-PRO's 2.4mm fixed lens at 132° horizontal—a meaningfully wider angle for tight or wide-entry coverage. DORI figures favor the Hanwha at equivalent ranges: Detect 25.1m vs. 17.1m, Observe 10.0m vs. 6.8m, Recognize 5.0m vs. 3.4m, Identify 2.5m vs. 1.7m, reflecting the narrower focal length's reach advantage.
What about installation and environment?
The Hanwha QND-6012R1 is rated for indoor use only, with an operating range of -10°C to +55°C and no published IP or IK rating in the provided specifications. It accepts PoE (IEEE 802.3af Class 3) or 12VDC, draws up to 7.4W, and weighs 255g. Its pan/tilt/rotate adjustment range is 0–350° / 0–67° / 0–355°. Dimensions are Ø110×86mm.
The i-PRO WV-X35302-F2L is built for outdoor deployment: IP66 (IEC 60529), NEMA 4X, IK10 impact resistance, and wind resistance up to 40m/s (~89 mph). Its operating temperature spans -40°C to +60°C (power-on range: -20°C to +60°C), making it suitable for harsh climates. It draws up to 8.6W over PoE (IEEE 802.3af, Class 0 per spec) and weighs approximately 475g. The aluminum die-cast housing with tamper-resistant enclosure is a direct contrast to the Hanwha's plastic indoor body. Safety certifications listed include UL 62368-1, c-UL, CE, and IEC62368-1, and it carries EMC marks (FCC Part 15 Class A, EN55032 Class A).
Which fits your VMS and analytics better?
Both cameras support ONVIF Profiles G, S, and T. The i-PRO additionally lists ONVIF Profile M, which covers metadata including AI object classification—relevant if your VMS leverages structured analytics metadata. The Hanwha supports SUNAPI (HTTP API) and the Wisenet Open Platform for deeper integration with Wisenet VMS environments. Streaming: Hanwha supports up to 6 unicast users and 3 simultaneous profiles; the i-PRO supports up to 14 simultaneous users.
Analytics differ substantially. The Hanwha provides defocus detection, directional detection, enter/exit, virtual line, and tampering—all server-side or camera-side rule-based analytics—but no specified AI classification engine. The i-PRO runs on an Ambarella CV25M SoC and includes AI Video Motion Detection, Face Detection, People Detection, and AI Sound Classification (gunshot, yell, vehicle horn, glass break). The i-PRO also provides built-in audio (microphone and audio detection) along with G.726/G.711 compression; the Hanwha's provided specs list no audio input or output. Edge storage: Hanwha supports microSD/SDHC/SDXC up to 128GB (1 slot); i-PRO supports microSDXC up to 512GB. The i-PRO also specifies FIPS 140-2 Level 3 and signed firmware; the Hanwha lists HTTPS/SSL, 802.1X (EAP-TLS, EAP-LEAP), and digest authentication, but no FIPS rating is stated in the provided specs.
Which should you choose: the QND-6012R1 or the X35302-F2L?
Our take: The QND-6012R1 is the stronger choice when deploying in a controlled indoor environment on a Wisenet VMS platform where DORI reach and cost-efficiency matter. It achieves a Detect range of 25.1m versus the i-PRO's 17.1m, integrates natively via SUNAPI, and draws 7.4W versus 8.6W. However, the WV-X35302-F2L is the correct selection for any outdoor or harsh-environment installation: its IP66/IK10/NEMA 4X-rated aluminum housing, -40°C to +60°C operating range, and 40m/s wind resistance address conditions the Hanwha's unrated plastic indoor body cannot. The i-PRO also delivers a wider 132° field of view (vs. 113.7°), a higher 144dB Super Dynamic range (vs. 120dB), AI sound classification, and FIPS 140-2 Level 3 security—capabilities that justify its premium for high-security or AI-analytics-driven deployments.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha QND-6012R1 | i-PRO X35302-F2L |
|---|---|---|
| Resolution | 1920×1080 | 2048×1536 |
| Image Sensor | 1/2.8" 2MP CMOS | Approx. 1/2.8" type CMOS |
| Lens / Focal Length | 2.8mm fixed | 2.4mm fixed |
| Horizontal Field of View | 113.7° | 132° (16:9) |
| Min. Illumination (Color / IR) | 0.03 Lux / 0 Lux (IR) | 0.02 Lux / 0 Lux (B&W+IR) |
| IR Range | 20m | 21m (30IRE) / 15m (50IRE) |
| Wide Dynamic Range | 120dB | 144dB max (Super Dynamic Level 31) |
| Max Frame Rate | 30fps | Variable (not specified as fixed 30fps) |
| Video Compression | H.265, H.264 (Main/High), MJPEG | H.265, H.264, JPEG |
| IP Rating | — (not stated; indoor only) | IP66 (IEC 60529), NEMA 4X |
| IK / Impact Rating | — | IK10 (IEC 62262) |
| Operating Temperature | -10°C to +55°C | -40°C to +60°C (power-on: -20°C to +60°C) |
| Power Input / PoE Class | PoE IEEE 802.3af Class 3 / 12VDC; 7.4W max | PoE IEEE 802.3af Class 0; 8.6W max |
| Edge Storage | microSD/SDHC/SDXC up to 128GB | microSDXC up to 512GB / microSDHC up to 32GB |
| Audio | — | Built-in mic; G.726, G.711; AI sound classification |
| AI Analytics | Rule-based (enter/exit, virtual line, tampering) | AI VMD, Face Detection, People Detection, AI Sound Classification |
| ONVIF Profiles | G / S / T | G / M / S / T |
| Dimensions | Ø110.0×86.0mm | 109mm (W) × 53mm (H) × 119mm (D) |
| Weight | 255g (0.56 lb) | Approx. 475g (1.05 lb) |
| Environment Rating | Indoor | Outdoor (IP66 / IK10 / NEMA 4X) |
| Warranty | 3-year | 5-year |
Frequently Asked Questions
Which should you choose: the QND-6012R1 or the X35302-F2L?
The QND-6012R1 is the stronger choice when deploying in a controlled indoor environment on a Wisenet VMS platform where DORI reach and cost-efficiency matter. It achieves a Detect range of 25.1m versus the i-PRO's 17.1m, integrates natively via SUNAPI, and draws 7.4W versus 8.6W. However, the WV-X35302-F2L is the correct selection for any outdoor or harsh-environment installation: its IP66/IK10/NEMA 4X-rated aluminum housing, -40°C to +60°C operating range, and 40m/s wind resistance address conditions the Hanwha's unrated plastic indoor body cannot. The i-PRO also delivers a wider 132° field of view (vs. 113.7°), a higher 144dB Super Dynamic range (vs. 120dB), AI sound classification, and FIPS 140-2 Level 3 security—capabilities that justify its premium for high-security or AI-analytics-driven deployments.
Is the QND-6012R1 or WV-X35302-F2L better for low-light performance?
Both cameras reach 0 Lux in IR mode. In color/ambient light, the i-PRO WV-X35302-F2L has a slightly lower minimum illumination of 0.02 Lux versus 0.03 Lux for the Hanwha QND-6012R1. The i-PRO also specifies IR reach of 21m at 30IRE; the Hanwha specifies 20m without a stated IRE reference. The practical difference in low-light sensitivity is marginal, but the i-PRO's 144dB Super Dynamic range (vs. 120dB WDR) provides a more significant advantage in high-contrast mixed-lighting scenes.
Can the WV-X35302-F2L be used indoors instead of the QND-6012R1?
Yes. The WV-X35302-F2L is rated for both indoor and outdoor use (IP66/IK10, -40°C to +60°C). However, it is heavier (475g vs. 255g), draws more power (8.6W vs. 7.4W), and costs more. For a standard indoor office or retail installation without harsh conditions, the QND-6012R1's lighter plastic housing and lower power draw may be more practical. The i-PRO's AI analytics and audio capabilities may still justify its use indoors in security-sensitive or compliance-driven environments.
Which camera is easier to integrate with a third-party VMS?
Both support ONVIF Profiles G, S, and T, so either will work with any ONVIF-compliant VMS. The i-PRO WV-X35302-F2L additionally supports ONVIF Profile M, which enables structured AI metadata (face, people, motion events) to flow into compatible VMS platforms that consume it. The Hanwha QND-6012R1 adds SUNAPI and the Wisenet Open Platform, which provide deeper functionality specifically within Wisenet/Hanwha VMS ecosystems. For non-Wisenet VMS environments requiring AI metadata, the i-PRO has the broader standards-based integration story.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.