Hanwha C7083RVD vs Hanwha PNM-7082RVD: Specification Comparison
Both the Hanwha PNM-C7083RVD and PNM-7082RVD are dual-sensor, 2×2MP outdoor motorized varifocal dome cameras sharing the same 4MP aggregate resolution class, identical 3–6mm lens range, and PoE+ power requirements. They target the same installation scenarios — parking structures, building perimeters, and wide-area outdoor coverage requiring dual-sensor panoramic overlap — making them direct cross-shop candidates. The comparison focuses on where the two models diverge: AI analytics depth, RAM capacity, privacy masking breadth, smart codec generation, and maximum power draw.
In This Guide
How do the imaging specs compare?
Both cameras use twin 1/2.8" CMOS sensors, each capturing 1920×1080 at 30fps via a 3–6mm (2×) motorized varifocal lens with F2.2 (Wide) to F3.1 (Tele) aperture and an identical angular field of view: H 107°–56°, V 57°–31°, D 126°–64°. Minimum illumination is identical at 0.035 Lux color and 0 Lux with IR active. IR illumination range is the same on both: 15m typical and 25m scene-dependent. Extreme WDR is rated at 120dB on both units.
Digital noise reduction differs: the C7083RVD ships with WiseNR II (described as AI-engine-based) plus SSNR V, while the 7082RVD carries the earlier WiseNR plus SSNR V without the AI-engine designation. The 7082RVD adds a Defog function not listed in the C7083RVD spec sheet. Backlight compensation on the 7082RVD explicitly lists HLC (Highlight Compensation) in addition to BLC, WDR, and SSDR, whereas the C7083RVD spec omits HLC. DORI detection distances are identical across both models at all four tiers (Detect wide 28.4m / tele 72.2m through Identify wide 2.8m / tele 7.2m).
What about installation and environment?
Physical form factor is identical: both measure 215×135×93.2mm (8.46"×5.31"×3.67") and weigh 1,330g. Both are white aluminum bodies with hard-coated dome bubbles, RAL9003, and share the same conduit knockout (1/2" / M20) and compatible gangbox list (single, double, 4" octagon, 4" square). The hanging mount accessory SBP-215HMW applies to both. Environmental ratings are identical: IP66/IP67, NEMA 4X, and IK10 impact protection. Operating temperature is –40°C to +55°C and storage –50°C to +60°C on both.
Power differs materially: the C7083RVD draws up to 20W typical 15.5W via PoE+ (IEEE 802.3at, Class 4), while the 7082RVD draws a lower maximum of 17W typical 12.5W on the same PoE+ Class 4 input. In midspan or switch-port-budgeted deployments, the 7082RVD's lower draw provides 3W of headroom per port. Both cameras provide a micro USB Type B output at 1280×720 for installation alignment. Audio and alarm I/O on both models require the optional SPM-4210 I/O box; neither has native built-in connectors for these functions.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile S/T, SUNAPI (HTTP API), and Open Platform, ensuring broad VMS compatibility. The protocol stack is identical across both (IPv4/IPv6, RTP, RTSP, HTTPS, SNMPv1/v2c/v3, SRTP, LLDP, Bonjour, etc.). Security credentials are equivalent: TPM 2.0 (FIPS 140-2 Level 2), 802.1X (EAP-TLS/LEAP/PEAP MSCHAPv2), and Hanwha Techwin Root CA pre-installed on both. Edge storage tops out at microSD/SDHC/SDXC up to 512GB on a single slot for both. RAM differs: the C7083RVD has 2GB RAM and 512MB Flash, while the 7082RVD carries 4GB RAM and 512MB Flash.
Analytics capability is a significant differentiator. The C7083RVD lists AI-engine-based analytics with classified object types (Person, Face, Vehicle, License Plate), vehicle sub-type attributes (car, bus, truck, motorcycle, bicycle), Bestshot support, and event types including object detection, virtual line (crossing/direction), and virtual area (loitering listed). The 7082RVD analytics spec lists motion detection, virtual line/direction, intrusion, and loitering — without AI object classification or attribute detection. Privacy masking also diverges: the 7082RVD supports 32 zones in six colors plus mosaic masking, versus 6 zones in three colors on the C7083RVD with no mosaic option. Streaming capacity favors the 7082RVD: it supports Unicast to 20 users and up to 10 profiles, versus Unicast to 10 users and 5 profiles per channel on the C7083RVD. Smart codec on the C7083RVD is WiseStream II + III; the 7082RVD supports WiseStream II plus Manual (5-area).
Which should you choose: the C7083RVD or the PNM-7082RVD?
Our take: The C7083RVD is the stronger choice when AI-driven object classification and license-plate or vehicle-type analytics are operationally required. It delivers Hanwha's AI-engine analytics stack — classifying Person, Face, Vehicle, and License Plate with vehicle sub-type attributes — while the 7082RVD's analytics spec covers only rule-based events (virtual line, intrusion, loitering) without object classification. The 7082RVD counters with twice the RAM (4GB vs 2GB), a meaningfully higher Unicast stream count (20 vs 10 users) and profile count (10 vs 5 per channel), 32 privacy masking zones versus 6, and a lower maximum power draw (17W vs 20W) that eases PoE budget planning. Both cameras are electrically and mechanically interchangeable in the enclosure. Choose the C7083RVD for analytics-first deployments requiring AI classification; choose the 7082RVD where streaming capacity, richer privacy masking, and tighter PoE budgeting take priority.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha C7083RVD | Hanwha PNM-7082RVD |
|---|---|---|
| Resolution (per sensor) | 2MP (1920×1080) × 2 sensors = 4MP total | 2MP (1920×1080) × 2 sensors = 4MP total |
| Image Sensor | 1/2.8" CMOS × 2CH | 1/2.8" CMOS × 2CH |
| Lens / Focal Length | 3–6mm (2×) motorized varifocal, Fixed IRIS | 3–6mm (2×) motorized varifocal, Fixed IRIS |
| Max Aperture | F2.2 (Wide) – F3.1 (Tele) | F2.2 (Wide) – F3.1 (Tele) |
| Min Illumination | 0.035 Lux color / 0 Lux IR | 0.035 Lux color / 0 Lux IR |
| IR Range | 15m typical; 25m scene-dependent | 15m typical; 25m scene-dependent |
| Wide Dynamic Range | extremeWDR 120dB | extremeWDR 120dB |
| Digital Noise Reduction | WiseNR II (AI engine) + SSNR V | WiseNR + SSNR V |
| Defog | Not specified | Supported |
| HLC (Highlight Compensation) | Not specified | Supported |
| AI Analytics | Person / Face / Vehicle / License Plate classification; vehicle sub-type attributes; Bestshot | Rule-based only: virtual line, intrusion, loitering — no object classification |
| Privacy Masking | 6 zones, 4-point, Gray/Black/White | 32 zones, 4-point, 6 colors + Mosaic |
| RAM / Flash | 2GB RAM / 512MB Flash | 4GB RAM / 512MB Flash |
| Unicast Streams / Profiles | 10 users / 5 profiles per channel | 20 users / 10 profiles |
| Smart Codec | WiseStream II + WiseStream III | WiseStream II + Manual (5-area) |
| Power (Max / Typical) | PoE+ Class 4; Max 20W / Typical 15.5W | PoE+ Class 4; Max 17W / Typical 12.5W |
| IP / NEMA Rating | IP66 / IP67 / NEMA 4X | IP66 / IP67 / NEMA 4X |
| Impact Rating | IK10 | IK10 |
| Operating Temperature | –40°C to +55°C | –40°C to +55°C |
| Edge Storage | microSD/SDHC/SDXC, 1 slot, max 512GB | microSD/SDHC/SDXC, 1 slot, max 512GB |
| Audio I/O | Via optional SPM-4210 I/O box | Via optional SPM-4210 I/O box |
| Dimensions (W×D×H) | 215×135×93.2mm (8.46"×5.31"×3.67") | 215×135×93.2mm (8.46"×5.31"×3.67") |
| Weight | 1,330g | 1,330g |
| Warranty | 3 years | 3 years |
Frequently Asked Questions
Which should you choose: the C7083RVD or the PNM-7082RVD?
The C7083RVD is the stronger choice when AI-driven object classification and license-plate or vehicle-type analytics are operationally required. It delivers Hanwha's AI-engine analytics stack — classifying Person, Face, Vehicle, and License Plate with vehicle sub-type attributes — while the 7082RVD's analytics spec covers only rule-based events (virtual line, intrusion, loitering) without object classification. The 7082RVD counters with twice the RAM (4GB vs 2GB), a meaningfully higher Unicast stream count (20 vs 10 users) and profile count (10 vs 5 per channel), 32 privacy masking zones versus 6, and a lower maximum power draw (17W vs 20W) that eases PoE budget planning. Both cameras are electrically and mechanically interchangeable in the enclosure. Choose the C7083RVD for analytics-first deployments requiring AI classification; choose the 7082RVD where streaming capacity, richer privacy masking, and tighter PoE budgeting take priority.
Is the PNM-C7083RVD or PNM-7082RVD better for AI-based object detection?
The PNM-C7083RVD is the specified AI analytics model. Its spec sheet lists classified object types (Person, Face, Vehicle, License Plate) and vehicle sub-type attributes (car, bus, truck, motorcycle, bicycle) powered by an AI engine, along with Bestshot support. The PNM-7082RVD spec describes rule-based analytics only — virtual line, intrusion, and loitering — without object classification or attribute detection.
Do both cameras draw the same amount of power over PoE?
No. Both use PoE+ (IEEE 802.3at, Class 4), but their maximum draw differs. The PNM-C7083RVD is rated at up to 20W (typical 15.5W), while the PNM-7082RVD is rated at up to 17W (typical 12.5W). In constrained switch-port or midspan budgets, the 7082RVD saves up to 3W per port.
Can either camera support more than 10 simultaneous live-view streams?
Yes, but only the PNM-7082RVD. Its spec lists Unicast support for up to 20 simultaneous users and up to 10 streaming profiles. The PNM-C7083RVD supports Unicast for up to 10 users and 5 profiles per channel. If your deployment requires high concurrent viewer counts, the 7082RVD has the specified advantage.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.