Geovision MD87100-0D010 vs Geovision TVD8710-0010: Specification Comparison
Both the Geovision MD87100-0D010 and the TVD8710-0010 are 8MP H.265 dome cameras from the same manufacturer, targeting fixed-installation IP surveillance deployments. The MD87100-0D010 is a standard IR dome with a motorized varifocal lens, while the TVD8710-0010 is a vandal-rated dome with a fixed lens. Buyers choosing between them are weighing remote lens flexibility and broader mounting options against physical hardening for tamper-prone environments. This comparison draws strictly from the provided specifications for each model.
In This Guide
How do the imaging specs compare?
Both cameras share an 8MP resolution and H.265 compression. The MD87100-0D010 specifies a 1/2.5" sensor, a varifocal 4–8mm motorized lens with F/1.44 maximum aperture, WDR Pro, and IR with an auto IR-cut Day/Night filter. The TVD8710-0010 lists a 4.3mm fixed lens described as 4.3x optical zoom, WDR Pro, and Super Low Lux minimum illumination. No sensor size or aperture figure is provided for the TVD8710-0010.
The MD87100-0D010's varifocal 4–8mm range allows remote field-of-view adjustment after installation — a practical advantage in complex or changing scenes. The TVD8710-0010's 4.3mm fixed lens offers no post-install adjustment but specifies Super Low Lux sensitivity for low-light performance; no equivalent minimum illumination figure is provided for the MD87100-0D010. IR night vision is confirmed for both; IR range figures are not specified for either model in the provided data.
What about installation and environment?
The MD87100-0D010 supports a wide range of mounting configurations: wall, ceiling, pole, pendant, corner, and rack. Its provided dimensions are 200 x 170 x 257.5 mm and it weighs 3.17 kg (6.99 lb). Power is via PoE 802.3af at a maximum of 12.95W. No IP ingress rating, IK impact rating, or operating temperature range is specified in the provided data for this model.
The TVD8710-0010 is a vandal dome, implying physical hardening, but no specific IK rating or IP rating is listed in the provided specifications. Mount type is ceiling only. Power is listed as PoE, but the PoE standard (802.3af/at) and wattage draw are not specified. Dimensions and weight are also absent from the provided data. Buyers requiring confirmed IK or IP ratings for either model should consult the respective datasheets before specifying.
Which fits your VMS and analytics better?
The MD87100-0D010 explicitly lists ONVIF Profile S compliance and confirmed compatibility with Geovision GV-VMS, Milestone, and third-party ONVIF RTSP platforms. It also specifies face detection as an on-board analytic and carries an ONVIF: Yes attribute. The TVD8710-0010 lists compatibility with ONVIF-compliant NVR/VMS platforms in general terms but does not specify a named ONVIF profile, named VMS partners, or any edge analytics capabilities.
Neither model's provided specifications include audio (microphone input/output), on-board SD card storage, or alarm I/O details. These specs are absent for both and should be verified against the respective datasheets at the links provided before finalizing a design that depends on local recording or two-way audio.
Which should you choose: the MD87100-0D010 or the TVD8710-0010?
Our take: The MD87100-0D010 is the stronger choice when post-installation field-of-view flexibility, named VMS compatibility, or edge analytics are required. Its motorized varifocal 4–8mm lens (versus the TVD8710-0010's fixed 4.3mm) allows remote focal adjustment without physical access to the camera head — a concrete operational advantage in complex deployments. The MD87100-0D010 also specifies ONVIF Profile S with confirmed Milestone and GV-VMS support and includes face detection analytics; neither capability is confirmed in the TVD8710-0010 spec set. Conversely, the TVD8710-0010's vandal dome designation and Super Low Lux rating address tamper-prone or extremely low-light environments where the MD87100-0D010 provides no confirmed IK or minimum-illumination figure. Buyers deploying in high-traffic or exposed locations where physical hardening is non-negotiable should verify the TVD8710-0010's IK and IP ratings directly from its datasheet before specifying.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision MD87100-0D010 | Geovision TVD8710-0010 |
|---|---|---|
| Resolution | 8 MP | 8 MP |
| Image Sensor Size | 1/2.5" | — |
| Lens / Focal Length | Varifocal 4–8mm motorized | Fixed 4.3mm |
| Max Aperture | F/1.44 | — |
| Min Illumination | — | Super Low Lux |
| IR / Night Vision | IR LEDs; Day/Night; Auto IR-cut filter | IR |
| WDR | WDR Pro | WDR Pro |
| Video Compression | H.265 | H.265 |
| Form Factor | Dome | Vandal Dome |
| Mount Type | Wall; Ceiling; Pole; Pendant; Corner; Rack | Ceiling |
| Power Input | PoE 802.3af; 12.95W max | PoE (standard not specified) |
| ONVIF | Yes — Profile S | ONVIF-compliant (profile not specified) |
| VMS Compatibility | GV-VMS; Milestone; ONVIF RTSP platforms | ONVIF-compliant NVR/VMS (no named partners) |
| Edge Analytics | Face detection | — |
| Dimensions | 200 x 170 x 257.5 mm (7.9 x 6.7 x 10.1") | — |
| Weight | 3.17 kg (6.99 lb) | — |
Frequently Asked Questions
Which should you choose: the MD87100-0D010 or the TVD8710-0010?
The MD87100-0D010 is the stronger choice when post-installation field-of-view flexibility, named VMS compatibility, or edge analytics are required. Its motorized varifocal 4–8mm lens (versus the TVD8710-0010's fixed 4.3mm) allows remote focal adjustment without physical access to the camera head — a concrete operational advantage in complex deployments. The MD87100-0D010 also specifies ONVIF Profile S with confirmed Milestone and GV-VMS support and includes face detection analytics; neither capability is confirmed in the TVD8710-0010 spec set. Conversely, the TVD8710-0010's vandal dome designation and Super Low Lux rating address tamper-prone or extremely low-light environments where the MD87100-0D010 provides no confirmed IK or minimum-illumination figure. Buyers deploying in high-traffic or exposed locations where physical hardening is non-negotiable should verify the TVD8710-0010's IK and IP ratings directly from its datasheet before specifying.
Is the MD87100-0D010 or TVD8710-0010 better for low light?
The TVD8710-0010 specifies Super Low Lux minimum illumination, which indicates strong low-light sensitivity. The MD87100-0D010 does not list a minimum illumination figure in the provided specs. Both include IR night vision. If low-light performance is critical, confirm lux ratings from the datasheets before selecting.
Which camera gives me more flexibility in where I point it after installation?
The MD87100-0D010 has a motorized varifocal 4–8mm lens, so field of view can be adjusted remotely after mounting without physically repositioning the camera. The TVD8710-0010 has a fixed 4.3mm lens with no remote focal adjustment. The MD87100-0D010 also supports wall, ceiling, pole, pendant, corner, and rack mounts versus ceiling-only for the TVD8710-0010.
Will both cameras work with my existing Milestone or third-party ONVIF VMS?
The MD87100-0D010 is confirmed ONVIF Profile S and is listed as compatible with Milestone and GV-VMS. The TVD8710-0010 is described as ONVIF-compliant but no specific profile or named VMS partners are listed in the provided specs. For the TVD8710-0010, verify ONVIF profile and VMS compatibility directly with Geovision or through the datasheet before integration.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.