ACTi Z952 vs Hanwha L7082R: Specification Comparison
The ACTi Z952 and Hanwha ANV-L7082R are both 4-megapixel outdoor PTZ dome cameras aimed at installers who need active pan-tilt-zoom coverage rather than fixed-angle surveillance. Both carry IP66/IK10 environmental ratings, PoE power, IR night vision, and ONVIF compatibility. The comparison highlights meaningful differences in optical zoom range, deep-learning analytics depth, network security architecture, and PTZ mechanical range — factors that directly affect site coverage geometry, VMS integration complexity, and long-term cybersecurity posture.
In This Guide
How do the imaging specs compare?
Both cameras deliver 4 MP at 30 fps. The ACTi Z952 uses a 4.8–120 mm lens with 25x optical zoom and a variable aperture of F1.5–3.8, giving it a substantial reach advantage for reading license plates or resolving distant detail. The Hanwha ANV-L7082R uses a 3.3–10.3 mm (3.1x) motorized varifocal lens with F1.6–F3.3 aperture; its zoom ratio is far more modest, making it better suited to fixed-zone coverage at moderate distances rather than long-range tracking. Hanwha publishes DORI distance figures: at the wide end it identifies subjects at 2.7 m and detects at 26.5 m; at tele, identification reaches 7.0 m and detection 70.3 m. ACTi does not publish equivalent DORI data in the provided specs.
On low-light performance, the Hanwha ANV-L7082R specifies a minimum illumination of 0.1 Lux color / 0 Lux IR with 850 nm IR LEDs rated to 30 m (98 ft). The ACTi Z952 lists IR capability and Day/Night (Adaptive IR) but does not specify a minimum illumination figure or IR throw distance in the provided specs. The ANV-L7082R also specifies 120 dB WDR (SSDR/BLC modes included), while the Z952 lists WDR without a dB rating. The ANV-L7082R's sensor is confirmed as a 1/2.8-inch CMOS; the Z952's sensor size is not stated in the provided specs.
What about installation and environment?
Both cameras are rated IP66 and IK10, suitable for outdoor exposed mounting with protection against high-pressure water jets and 20-joule impacts. Both draw power via PoE 802.3af (Class 3). The Hanwha ANV-L7082R specifies a maximum draw of 8.0 W (typical 6.0 W), which is comfortably within the 802.3af 15.4 W budget and requires no PoE+ infrastructure. The Z952's exact wattage is not stated in the provided specs, so switch port sizing cannot be directly confirmed from spec data alone.
The ANV-L7082R's operating temperature range is −30 °C to +55 °C with up to 95% RH, and it weighs 550 g with a ø137.8 × 107.1 mm dome housing in white plastic/aluminum (RAL 9003). It supports single-gang, double-gang, and 4-inch octagon back-boxes, and Hanwha lists a compatible hanging mount (SBP-301HMW2). The Z952's PTZ mechanical range spans full 360° continuous pan and motorized tilt; the ANV-L7082R's PTZ range is 0°–350° pan / 0°–67° tilt / 0°–355° rotate. The Z952's physical dimensions, weight, and operating temperature range are not provided in the supplied specs.
Which fits your VMS and analytics better?
The Hanwha ANV-L7082R carries a dedicated deep-learning processing unit (DLPU) enabling on-camera object classification, line crossing, loitering detection, tampering detection, and motion detection across up to 4 polygonal zones, with 6 privacy masking zones. It supports ONVIF Profile S/G/T and Hanwha's SUNAPI (HTTP API), as well as WiseStream II smart codec (5-area manual mode) for bandwidth reduction. Network security features are extensive: 802.1X (EAP-TLS/LEAP/PEAP), HTTPS/SRTP/WSS, firmware encryption, SD card partition encryption, digest authentication, brute-force prevention, IP-based access control, and device certificate (Hanwha Private Root CA). Edge storage is a single microSD/SDHC/SDXC slot supporting up to 128 GB.
The ACTi Z952 supports ONVIF and provides audio input and microSD edge storage, but the provided specs do not enumerate analytics capabilities beyond motion detection, nor do they detail network security protocols (802.1X, encryption standards). Video compression covers H.265 and H.264. The Z952's analytics depth and cybersecurity feature set cannot be confirmed from the supplied spec data, which is a consideration for deployments with NDAA, zero-trust network, or advanced event-automation requirements.
Which should you choose: the Z952 or the L7082R?
Our take: The ANV-L7082R is the stronger choice for fixed-zone outdoor PTZ coverage where analytics depth, cybersecurity compliance, and VMS ecosystem integration are priorities; the Z952 is the stronger choice where long-range optical zoom is the primary requirement. The Z952's 25x optical zoom (4.8–120 mm) versus the ANV-L7082R's 3.1x (3.3–10.3 mm) is the single largest spec delta — installers needing to cover parking structures, perimeter fencing, or license-plate capture at distance should weight this heavily. Conversely, the ANV-L7082R specifies a full DLPU analytics suite (object classification, loitering, line crossing), 120 dB WDR, 0.1 Lux minimum illumination, and a hardened cybersecurity stack (802.1X, firmware encryption, SD card encryption, device certificate) that the Z952 spec sheet does not document. For Hanwha VMS (Wisenet WAVE) or SUNAPI-integrated systems, the ANV-L7082R integrates natively; the Z952 is limited to ONVIF on non-ACTi platforms.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | ACTi Z952 | Hanwha L7082R |
|---|---|---|
| Resolution | 4 MP | 4 MP (2560×1440) |
| Image Sensor | — | 1/2.8" CMOS |
| Lens / Focal Length | 4.8–120 mm (25x optical zoom) | 3.3–10.3 mm (3.1x motorized varifocal) |
| Max Aperture | F1.5 (wide) – F3.8 (tele) | F1.6 (wide) – F3.3 (tele) |
| Min. Illumination | — | 0.1 Lux color / 0 Lux IR |
| IR Range | — | 30 m (98 ft) at 850 nm |
| WDR | WDR (dB rating not specified) | 120 dB WDR |
| Max Frame Rate | 30 fps | 30 fps @ 4 MP |
| Video Compression | H.265, H.264 | H.265, H.264, MJPEG |
| PTZ Range | 360° pan (continuous), motorized tilt | 0°–350° pan / 0°–67° tilt / 0°–355° rotate |
| IP Rating | IP66 | IP66 |
| IK / Impact Rating | IK10 | IK10 |
| Power Input / PoE Class | PoE 802.3af | PoE 802.3af Class 3, max 8.0 W |
| Operating Temperature | — | −30 °C to +55 °C |
| Edge Storage | MicroSD (capacity not specified) | MicroSD/SDHC/SDXC, 1 slot, up to 128 GB |
| On-Camera Analytics | — | DLPU: object classification, line crossing, loitering, tampering, motion (4 polygonal zones) |
| Audio | Audio input | Audio input (cable SPP-C7400 sold separately) |
| ONVIF | Yes | Profile S, G, T |
| Warranty | — | 3 years |
Frequently Asked Questions
Which should you choose: the Z952 or the L7082R?
The ANV-L7082R is the stronger choice for fixed-zone outdoor PTZ coverage where analytics depth, cybersecurity compliance, and VMS ecosystem integration are priorities; the Z952 is the stronger choice where long-range optical zoom is the primary requirement. The Z952's 25x optical zoom (4.8–120 mm) versus the ANV-L7082R's 3.1x (3.3–10.3 mm) is the single largest spec delta — installers needing to cover parking structures, perimeter fencing, or license-plate capture at distance should weight this heavily. Conversely, the ANV-L7082R specifies a full DLPU analytics suite (object classification, loitering, line crossing), 120 dB WDR, 0.1 Lux minimum illumination, and a hardened cybersecurity stack (802.1X, firmware encryption, SD card encryption, device certificate) that the Z952 spec sheet does not document. For Hanwha VMS (Wisenet WAVE) or SUNAPI-integrated systems, the ANV-L7082R integrates natively; the Z952 is limited to ONVIF on non-ACTi platforms.
Is the Z952 or ANV-L7082R better for monitoring large open areas like parking lots?
The Z952's 25x optical zoom (4.8–120 mm) gives it far greater reach than the ANV-L7082R's 3.1x (3.3–10.3 mm), making it the more capable choice for covering large distances or resolving detail across a wide area from a single mounting point. The ANV-L7082R's DORI data shows a tele-end detection range of 70.3 m, which is useful for moderate distances; the Z952's equivalent figures are not published in the provided specs.
Do both cameras work with third-party VMS platforms?
Both support ONVIF. The ANV-L7082R adds ONVIF Profile S, G, and T plus Hanwha's SUNAPI (HTTP API), which broadens native integration options on platforms that support Hanwha's SDK. The Z952 lists ONVIF compatibility without specifying which ONVIF profiles are supported in the provided specs, so profile-level compatibility with a target VMS should be verified with ACTi before deployment.
Which camera is better suited for a cybersecurity-conscious or government deployment?
The ANV-L7082R documents a significantly more detailed security feature set: 802.1X network authentication (EAP-TLS, EAP-LEAP, EAP-PEAP), HTTPS/SRTP/WSS encrypted communications, firmware encryption, SD card partition encryption, digest authentication, brute-force attack prevention, IP-based access control, and a device certificate issued by Hanwha's private root CA. The Z952's network security capabilities are not detailed in the provided specs, so a direct comparison cannot be made from available data. Neither camera is listed as NDAA-compliant in the provided specs for Product A; the NDAA notation present in some Product B fields is from conflicting spec data not confirmed for the ANV-L7082R.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.