ACTi B64 vs Geovision FD34100-001U: Specification Comparison
Both the ACTi B64 and Geovision GV-FD3410 (84-FD34100-001U) are 3MP indoor motorized-zoom dome cameras targeting fixed-installation surveillance in commercial interiors. Each ships with a 3–9 mm motorized varifocal lens, ONVIF compliance, and PoE power, placing them squarely in the same purchase consideration set for integrators specifying lobbies, corridors, and high-traffic facilities requiring post-installation field-of-view adjustment without camera replacement.
In This Guide
How do the imaging specs compare?
The ACTi B64 is specified at 1.3 MP effective output (1280×960) on a 1/3-inch sensor, despite the product title referencing '3MP.' Its motorized lens covers 3.0–9 mm with 3× optical zoom. Low-light performance is rated at 0.003 lux (color, F1.2) and 0 lux in B/W with IR active, with an 850 nm IR illuminator reaching 40 m. WDR is listed as Basic WDR at 88 dB. Maximum frame rate is 30 fps at 1280×960, rising to 60 fps at 1280×720.
The Geovision 84-FD34100-001U is specified at 3 MP resolution with a 3–9 mm motorized lens. Its WDR implementation is listed as WDR Pro, which is a higher-grade designation than the B64's Basic WDR, though the Geovision spec sheet provided does not disclose a dB figure, minimum illumination value, IR wavelength, or IR range. Compression, sensor size, and exact frame rates are also absent from the provided Geovision data, making a full pixel-level or sensitivity comparison impossible with the specifications on hand.
What about installation and environment?
The ACTi B64 carries an IK09 impact rating (certified to withstand a 5 kg ball drop), CE Class B, FCC Class B, EAC, and UL certifications (the last two applying to the optional PoE injector and power adapter). It operates from −10°C to 50°C (14°F to 122°F) and draws approximately 10 W via PoE+ (IEEE 802.3at, Class 3). Mounting options are broad: wall, pole, pendant, corner, and rack, and the unit weighs 720 g (1.587 lb). No IP ingress-protection rating is stated in the provided specs.
The Geovision 84-FD34100-001U specifies ceiling and wall mounting and lists PoE as a power input, with one marketing bullet also referencing DC 12 V and AC 24 V support—however, the PoE class, wattage draw, IK rating, IP rating, operating temperature range, and unit weight are all absent from the provided Geovision specification data and cannot be confirmed.
Which fits your VMS and analytics better?
The ACTi B64 supports ONVIF Profiles S, G, T, and Q, and is explicitly listed as compatible with Milestone XProtect, Genetec Security Center, and Axis Camera Station. Edge analytics include VMD, People Counting, and Smoke Detection. The camera provides two-way audio with line-in and line-out. On-board storage capability is not stated in the provided specs. PTZ control protocols supported are Visca, Pelco-D, Pelco-P, and ACTi URL commands.
The Geovision 84-FD34100-001U states ONVIF compliance without specifying which profiles (S, G, T, Q) are supported. No edge analytics, audio capability, on-board storage, or VMS-specific certifications beyond generic ONVIF are listed in the provided Geovision data.
Which should you choose: the B64 or the FD34100-001U?
Our take: The B64 is the stronger documented choice when verified analytics, two-way audio, broad VMS certification, and a confirmed impact rating are decision criteria. The B64's spec sheet confirms IK09 impact resistance, ONVIF Profiles S/G/T/Q, Milestone/Genetec/Axis Camera Station compatibility, VMD/People Counting/Smoke Detection analytics, two-way audio with line-in and line-out, and a 40 m IR range at 0.003 lux color sensitivity—none of which are documented for the Geovision unit in the available data. The Geovision 84-FD34100-001U lists WDR Pro and claims native 3 MP resolution, and may support multi-voltage power (DC 12 V / AC 24 V in addition to PoE), which could matter in legacy infrastructure. However, the absence of Geovision IK, IP, temperature, PoE class, illumination, and analytics specs makes a fair side-by-side evaluation impossible without the full Geovision datasheet. Specify the B64 where spec accountability and certified integrations are required; request the full Geovision datasheet before committing to the FD34100-001U on a spec-driven project.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | ACTi B64 | Geovision FD34100-001U |
|---|---|---|
| Resolution | 1.3 MP effective (1280×960) | 3 MP |
| Image Sensor | 1/3 inch | — |
| Lens / Focal Length | 3.0–9 mm motorized, 3× optical zoom | 3–9 mm motorized |
| Min. Illumination | 0.003 lux color (F1.2); 0 lux B/W (IR on) | — |
| IR Wavelength | 850 nm | — |
| IR Range | 40 m | — |
| WDR | Basic WDR (88 dB) | WDR Pro (dB not specified) |
| Max Frame Rate | 30 fps @ 1280×960; 60 fps @ 1280×720 | — |
| Video Compression | H.264 (Baseline/Main/High); MJPEG | — |
| IK / Impact Rating | IK09 | — |
| Operating Temperature | −10°C to 50°C (14°F to 122°F) | — |
| Power Input / PoE Class | PoE+ IEEE 802.3at, Class 3; ~10 W | PoE (class not specified) |
| Audio | Two-way; line-in; line-out | — |
| ONVIF Profiles | S, G, T, Q | Yes (profiles not specified) |
| Edge Analytics | VMD; People Counting; Smoke Detection | — |
| Mount Types | Wall; Pole; Pendant; Corner; Rack | Ceiling; Wall |
| Weight | 720 g (1.587 lb) | — |
Frequently Asked Questions
Which should you choose: the B64 or the FD34100-001U?
The B64 is the stronger documented choice when verified analytics, two-way audio, broad VMS certification, and a confirmed impact rating are decision criteria. The B64's spec sheet confirms IK09 impact resistance, ONVIF Profiles S/G/T/Q, Milestone/Genetec/Axis Camera Station compatibility, VMD/People Counting/Smoke Detection analytics, two-way audio with line-in and line-out, and a 40 m IR range at 0.003 lux color sensitivity—none of which are documented for the Geovision unit in the available data. The Geovision 84-FD34100-001U lists WDR Pro and claims native 3 MP resolution, and may support multi-voltage power (DC 12 V / AC 24 V in addition to PoE), which could matter in legacy infrastructure. However, the absence of Geovision IK, IP, temperature, PoE class, illumination, and analytics specs makes a fair side-by-side evaluation impossible without the full Geovision datasheet. Specify the B64 where spec accountability and certified integrations are required; request the full Geovision datasheet before committing to the FD34100-001U on a spec-driven project.
Is the B64 or FD34100-001U better for low-light performance?
Based on available specifications, only the ACTi B64 provides quantified low-light figures: 0.003 lux in color mode (F1.2) and 0 lux in B/W with its 850 nm IR illuminator active at up to 40 m. The Geovision 84-FD34100-001U lists IR capability but does not disclose minimum illumination values or IR range in the provided spec data, so a direct comparison cannot be made.
Which camera is easier to integrate with a third-party VMS?
The ACTi B64 explicitly lists compatibility with Milestone XProtect, Genetec Security Center, and Axis Camera Station, and supports ONVIF Profiles S, G, T, and Q. The Geovision 84-FD34100-001U states ONVIF compliance but does not specify which profiles are certified or list any named VMS integrations in the available data. Buyers using Milestone or Genetec have documented confirmation only for the B64.
Does either camera support edge analytics?
Yes—the ACTi B64 specifies VMD (video motion detection), People Counting, and Smoke Detection as on-camera analytics. No edge analytics are listed in the provided Geovision 84-FD34100-001U specifications.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.