Panduit UTP6AX35GR 35-ft Cat 6A UTP Patch Cord

Panduit UTP6AX35GR Cat 6A UTP Patch Cord

The Panduit TX6A 10Gig UTP6AX35GR delivers certified 10GBASE-T performance in a 35-foot green patch cord engineered for high-density PoE++ installations. Built on 24 AWG solid U/UTP cable with internal foil tape shielding, this Cat 6A patch cord eliminates alien crosstalk in bundle-heavy cable trays while maintaining the 0.250-inch diameter required for efficient pathway fill. The tangle-free modular latch prevents snag damage during moves, adds, and changes, and RapidID pre-installed barcodes enable instant port mapping when you're tracing circuits across multi-rack deployments.

Key Features

• Cat 6A U/UTP construction with internal foil tape for alien crosstalk suppression in densely bundled runs
• 24 AWG solid conductors rated for 2,500 mating cycles under IEEE 802.3bt Type 3 and Type 4 PoE++ load
• Tangle-free modular latch design prevents snag damage and ensures fast release during MAC operations
• RapidID pre-installed barcode labels for software-driven port mapping and circuit documentation
• 35-foot (10.67 m) length handles cross-aisle runs and equipment-to-patch-panel links in standard rack layouts
• Green jacket color-coding for VLAN segmentation, building zone identification, or circuit-type marking per TIA-606-B
• Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA channel performance requirements
• UL 1863 Listed, RoHS compliant, meets ANSI/TIA-1096-A interface standards

The UTP6AX35GR is built on Panduit's TX6A 10Gig platform, which uses internal foil tape shielding to achieve Category 6A alien crosstalk performance without the jacket bulk or termination complexity of shielded F/UTP or S/FTP cables. The 0.250-inch (6.4 mm) overall diameter matches standard Cat 6 UTP patch cords, so you maintain existing cable management density limits while upgrading link bandwidth to 10 Gb/s. The solid 24 AWG conductors deliver lower DC resistance than stranded-conductor designs, which translates to higher available PoE power at the far end—critical when you're powering 802.3bt Type 4 devices like PTZ cameras or 6-stream Wi-Fi 6E access points at the end of a 35-foot horizontal link. Panduit rates these cords for 2,500 insertion cycles under full PoE++ thermal load, verified through UL testing to IEEE 802.3af, 802.3at, and 802.3bt Type 3/Type 4 specifications.

The tangle-free latch is a retention-clip design that sits flush with the plug body, eliminating the cantilever snag points found on traditional boot-and-latch assemblies. When you're pulling a cord through a congested vertical manager or sliding it past adjacent plugs in a 48-port switch, the low-profile latch clears obstructions without binding. The fast-release mechanism requires only a straight pull—no two-handed pinch-and-pull manipulation—so you can disconnect a cord with one hand while holding a flashlight or documentation tablet in the other. This design detail cuts MAC time in high-port-count environments where you're swapping dozens of links during after-hours maintenance windows.

RapidID barcode labels are factory-installed on each plug, encoding a unique serial number that integrates with Panduit's RapidID cable management software. When you're documenting a new installation or auditing an existing infrastructure, you scan the barcode at each port with a handheld scanner or mobile device, and the software auto-populates the circuit record with cable type, length, and installation date. This eliminates manual data entry errors and gives you an auditable chain of custody for every patch cord in the system—essential for SOC 2, HIPAA, or PCI-DSS compliance audits where you need to prove circuit integrity and change tracking. The barcode survives 2,500 mating cycles and typical solvent-based cleaning, so it remains readable through the full service life of the cord.

The 35-foot length is the standard choice for cross-aisle equipment-to-patch-panel links in data centers with 42U racks on 48-inch center spacing, or for connecting distribution switches to intermediate distribution frames in office environments. The green jacket supports TIA-606-B color-coding schemes for VLAN segmentation, building zone identification, or circuit-type marking. The CM flammability rating meets NEC Article 800 requirements for general-purpose horizontal cable installation in commercial buildings. This cord exceeds ANSI/TIA-568.2-D Category 6A channel limits with comfortable headroom for connector insertion loss variability and field test measurement uncertainty, ensuring clean certification results with Fluke DSX-5000 or equivalent test equipment.