Panduit UTP6AX16 Cat 6A UTP Patch Cord

The Panduit UTP6AX16 delivers certified 10GBASE-T performance in a 16-foot Cat 6A patch cord engineered for datacenter server-to-switch runs, IP surveillance aggregation points, and high-density structured cabling deployments. Built on 24 AWG solid copper with Panduit's TX6A™ modular plug system, this cable maintains 500 MHz bandwidth across the full channel while supporting PoE++ (IEEE 802.3bt Type 4) at 90W without derating—critical for powering PTZ cameras, access points, and managed switches from a single cable drop.

Key Features

Certified 10 Gb/s transmission over Cat 6A U/UTP construction

24 AWG solid copper conductors for permanent-link performance

RapidID pre-installed barcoding for asset tracking and port mapping

Tangle-free latch design prevents snags during rack installations

PoE++ compatible (802.3bt Type 3/4) up to 90W

Exceeds ANSI/TIA-568.2-D and ISO 11801 Class EA requirements

2,500-cycle plug durability rating for high-change environments

CM-rated jacket for in-building horizontal runs

The UTP6AX16 uses unshielded twisted-pair construction with 0.250-inch (6.4 mm) cable diameter—tight enough for high-density patch panels while maintaining the bend radius required for reliable termination. Panduit's TX6A modular plugs terminate all four pairs with a load bar that holds wire geometry during the crimp, eliminating the pair untwist and return loss issues common in field-terminated Cat 6A connectors. The 24 AWG solid conductor gauge provides lower DC resistance than stranded alternatives (9.38 Ω/100m maximum per TIA-568.2-D), which matters on PoE++ links where you're pushing 90 watts across 16 feet—voltage drop stays under 1.5V, keeping powered devices above their minimum operating threshold. The cable meets ANSI/TIA-1096-A (formerly FCC Part 68) balance requirements and IEC 60603-7 mechanical specs, ensuring compatibility with both legacy and next-gen 10G switch ports.

The 16-foot length maps cleanly to mid-rack server-to-ToR switch runs (up to 8U vertical reach), aggregation-layer uplinks in IP camera deployments, and cross-connect jumpers in telecommunications rooms where structured cabling terminates on patch panels. Panduit's tangle-free latch uses a molded boot that routes the release tab above the plug body—racking or de-racking a 48-port switch no longer requires needle-nose pliers to free snagged cables, and the latch survives the 2,500-cycle rating even in change-heavy environments like MSP-managed networks or lab builds. The off-white jacket color matches standard TIA-606-C administration schemes for horizontal cabling, visually distinguishing permanent infrastructure from colored service cords. For inventory-tracked deployments, RapidID barcodes ship pre-applied to each cable; scan the code with Panduit's RapidID mobile app and the system auto-populates your DCIM or asset database with cable length, port endpoints, and installation date—no manual spreadsheet updates.

What separates the TX6A system from commodity Cat 6A is the engineered plug-to-cable interface: Panduit's load bar locks pair geometry before the crimp, so return loss stays below 20 dB through 500 MHz even after repeated flexing—critical for 10GBASE-T's PAM16 modulation, which relies on clean return paths to decode 800 Mbaud signaling. The cable carries UL 1863 listing, RoHS compliance, and ships with manufacturer warranty. For integrators running surveillance backbones, building datacenter fabrics, or deploying PoE-dependent access layers, the UTP6AX16 provides the headroom to run 10 Gb/s + 90W PoE concurrently without the alien crosstalk shielding tax or the grounding complexity of F/UTP alternatives.