Panduit UTP6AX9 Cat 6A 9 ft UTP Patch Cord

Panduit UTP6AX9 Cat 6A 24 AWG 9 ft UTP Patch Cord

The Panduit UTP6AX9 is a TX6A 10Gig Cat 6A UTP patch cord engineered for data center I/O consolidation, server virtualization, and 10GBASE-T Ethernet deployments where alien crosstalk must stay below TIA-568.2-D limits. This 9-foot, off-white cord uses 24 AWG solid copper conductors in a U/UTP construction with 0.250-inch (6.4 mm) overall diameter, fitting high-density patch panels without blocking adjacent ports. The tangle-free latch design prevents snags during moves, adds, and changes, while factory-installed RapidID barcodes enable one-scan port mapping when paired with Panduit's RapidID software—eliminating manual documentation errors in multi-rack installations.

Key Features

• 10 Gb/s transmission over Cat 6A U/UTP construction with solid foil tape to limit alien crosstalk
• 24 AWG solid copper conductors, CM-rated jacket, 9 ft (2.74 m) length
• Tangle-free modular plug latch for snag-free deployment in high-density racks
• Factory-installed RapidID barcodes for rapid port mapping and cable management
• Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA standards (1–500 MHz)
• Supports IEEE 802.3bt Type 3 and Type 4 PoE (up to 90W/100W delivered power)
• Compatible with both T568A and T568B wiring schemes
• Off-white jacket for clean aesthetic in structured cabling installations

The UTP6AX9 employs a U/UTP (unshielded twisted pair) cable construction with solid foil tape shielding that mitigates alien crosstalk—the primary limiting factor in 10GBASE-T performance over Cat 6A channels. Each of the four pairs uses 24 AWG solid copper conductors, providing lower DC resistance than stranded alternatives and ensuring consistent attenuation across the full 1–500 MHz frequency range required by TIA-568.2-D. The 0.250-inch (6.4 mm) diameter cable fits standard patch-panel port spacing without forcing adjacent cables out of position, critical when filling a 48-port panel in a 1U form factor. Both ends terminate in high-performance modular plugs with 50-micron gold-plated contacts that meet IEC 60603-7 and ANSI/TIA-1096-A (formerly FCC Part 68) mechanical and electrical requirements. The CM (communications) flammability rating satisfies general horizontal and riser installation requirements per UL 1863 and CAN/CSA-C22.2 No. 214 (UL File E129886); verify local AHJ requirements if plenum (CMP) rating is mandated.

The tangle-free latch design addresses a persistent frustration in live data center MACs: standard RJ45 boots snag on adjacent cables, forcing technicians to remove multiple patch cords to release a single connection. Panduit's latch geometry allows thumb-and-forefinger release even in fully populated panels, reducing MACs time and minimizing the risk of accidental disconnects. Factory-installed RapidID barcodes support Panduit's RapidID cable management platform—scan the barcode on each end during installation, and the software auto-populates your port map, rack elevation diagrams, and CMDB without manual data entry. This workflow is especially valuable in hyperconverged infrastructure deployments where each server may have eight or more network connections; a single mislabeled link can trigger hours of troubleshooting when VLANs or storage fabrics fail to converge. The cord ships individually packaged (carton quantity: 10) with a UPC of 61305677002, simplifying inventory tracking in multi-site rollouts.

Every UTP6AX9 cord exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA permanent link and channel performance requirements across all frequencies from 1 to 500 MHz, validated through Panduit's ISO 9001-certified manufacturing process. The cord supports IEEE 802.3bt Type 3 (60W) and Type 4 (90W/100W) Power over Ethernet, enabling direct connection to high-power devices like PTZ cameras, Wi-Fi 6E access points, and LED lighting controllers without mid-span injectors. Wiring is compatible with both T568A and T568B termination schemes, ensuring drop-in compatibility with existing TIA-568-compliant infrastructure. RoHS-compliant construction meets EU and California e-waste regulations for equipment deployed in multinational facilities.