Panduit UTP6AX15MOR 15m Cat 6A Patch Cord Orange

Panduit UTP6AX15MOR Cat 6A U/UTP Patch Cord

High-density datacenter and enterprise network deployments demand cables that deliver certified 10GBASE-T performance while simplifying moves, adds, and changes. The Panduit UTP6AX15MOR is a 15-meter (49.2 ft) Cat 6A U/UTP patch cord built on the TX6A 10Gig platform with solid 24 AWG conductors, orange jacket, and integrated alien crosstalk mitigation. Pre-installed RapidID barcodes enable software-driven port mapping without manual labeling, while the tangle-free release latch reduces snag-related downtime during cabinet work. PoE++ capable (802.3bt Type 3/Type 4), CM-rated for general building use, and rated for 2,500 mating cycles—a field-proven interconnect for structured cabling systems where uptime and traceability matter.

Key Features

• Cat 6A U/UTP, 24 AWG solid conductors, 15 m (49.2 ft) orange jacket
• TX6A 10Gig platform—exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA
• Integrated alien crosstalk shielding via solid foil tape—maintains 10 Gb/s in high-density bundles
• RapidID enabled with pre-installed barcodes for automated port mapping via RapidID software
• Tangle-free latch design—snag-resistant for faster rack installs and cable pulls
• PoE++ compatible: IEEE 802.3af/at/bt Type 3 and Type 4 rated for 100W applications
• 2,500-cycle mating rating—long service life in frequently reconfigured environments
• 0.250" (6.4 mm) diameter—fits standard cable management and high-density patch panels

The TX6A architecture uses unshielded twisted pair construction (U/UTP) with 24 AWG solid copper conductors and a solid foil tape shield layer that limits alien crosstalk—critical when running dozens of 10GBASE-T links in parallel within the same cable tray or bundle. Unlike stranded-conductor patch cords that rely solely on pair geometry, the foil tape provides a physical barrier against electromagnetic interference from adjacent cables, ensuring each link maintains the 500 MHz bandwidth headroom required for 10 Gb/s Ethernet over the full 100-meter permanent link budget. The 0.250-inch overall diameter keeps the cable flexible enough for tight-radius bends around vertical managers and horizontal troughs, while the CM flame rating satisfies general building plenum-alternative pathways (consult AHJ for plenum/riser-specific requirements). Modular plugs on both ends meet IEC 60603-7 and exceed TIA-1096-A (formerly FCC Part 68) transmission specs, with gold-plated contacts rated for 2,500 insertions—approximately five years of monthly reconfiguration before performance degradation becomes measurable.

RapidID integration is the operational differentiator: each cord ships with a pre-installed barcode label that ties into Panduit's RapidID port-mapping software, eliminating the manual label-maker step that slows MAC workflows and introduces transcription errors. Scan the cord before insertion, assign it to a logical port in the database, and the documentation updates automatically—essential for datacenters managing hundreds of inter-rack links or enterprise campuses supporting VLAN segmentation across multiple IDFs. The tangle-free latch uses a low-profile boot with recessed tab geometry that prevents snagging on adjacent cables during extraction; in high-density 48-port switch stacks, this design reduces the risk of accidentally unseating neighboring links when servicing a single port. PoE++ certification (802.3bt Type 3 and Type 4) supports up to 100W delivery over all four pairs, making the cord suitable for powering PTZ cameras, 802.11ax access points, and IP-based building controls without dedicated power drops.

The 15-meter length fits typical cross-aisle datacenter runs (rack row to distribution switch) and IDF-to-office drops in mid-rise commercial builds, where pre-terminated field cords would be too short and bulk cable termination would add labor cost. Orange jacket color-coding simplifies physical-layer troubleshooting in mixed-use environments (e.g., orange for data, blue for VoIP, yellow for management)—a best practice outlined in TIA-606-C administration standards. Backed by Panduit's Pan-Net warranty and RoHS compliance for global deployments, this cord integrates into existing TX6A channel infrastructure (jacks, panels, and cable) to deliver certified 10 Gb/s performance with auditable traceability from day one.