Panduit UTP6AX15MGY Cat 6A UTP 15M Patch Cord

Panduit UTP6AX15MGY Pan-Net Cat 6A UTP Patch Cord

The Panduit UTP6AX15MGY delivers 10 Gb/s Ethernet performance across 15-meter horizontal runs in high-density network environments. Built with 24 AWG solid conductors and a 0.250-inch low-profile jacket, this Cat 6A UTP patch cord meets TIA-568.2-D permanent link requirements while supporting PoE++ installations up to 100W per port. The integrated RapidID barcode system streamlines documentation during deployments across datacenter, enterprise campus, and security infrastructure projects.

Key Features

• 15-meter (49.2 ft) Cat 6A UTP construction for 10GBASE-T applications
• 24 AWG solid copper conductors optimized for permanent link installations
• Solid foil tape shielding limits alien crosstalk in high-density bundles
• Tangle-free latch design prevents snags during cable management
• Pre-installed RapidID barcodes enable automated port mapping and documentation
• Supports IEEE 802.3bt PoE++ Type 3 and Type 4 (up to 100W)
• Exceeds ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA specifications
• Rated for 2,500 mating cycles under PoE load conditions

The UTP6AX15MGY uses unshielded twisted pair construction with internal solid foil tape barriers that mitigate alien crosstalk without requiring grounded terminations. This U/UTP design maintains 10 Gb/s transmission across the full 100-meter channel while simplifying installation in environments where bonding and grounding infrastructure is limited. The 24 AWG solid conductors provide lower DC resistance than stranded equivalents, reducing voltage drop on PoE++ camera and wireless AP circuits where 15-meter home runs are common. The 0.250-inch overall diameter enables higher port density in patch panels and network cabinets compared to older Cat 6A designs, while the CM flammability rating supports installation in plenum return pathways when used with plenum-rated horizontal cable.

Integrators working on multi-building campus networks and datacenter projects will find the RapidID system reduces documentation time during acceptance testing. Each cord ships with pre-printed barcodes that link to Panduit's port mapping software, enabling field techs to scan endpoints and auto-populate as-built drawings rather than manually tracing cables. The tangle-free latch uses a flexible boot that deflects on conduit pulls but releases cleanly when lifted, eliminating the stuck-plug delays common with older snagless designs. In high-density security installations with 48-port PoE switches feeding IP cameras across multiple floors, the combination of low-profile diameter and positive-release latches can reduce deployment time by 15-20% compared to bulk-terminated field assemblies.

This patch cord exceeds ANSI/TIA-568.2-D Category 6A channel requirements and meets ISO 11801 Class EA specifications for 10GBASE-T applications. The IEEE 802.3bt Type 3 and Type 4 compatibility rating confirms the cable can deliver up to 100W PoE++ power without derating, critical for PTZ cameras with integrated heaters and Wi-Fi 6E access points. The 2,500-cycle connector durability rating under PoE load conditions ensures reliable performance in installations where periodic re-patching is required for VLAN changes or equipment swaps. For integrators building structured cabling systems to support 10 Gb/s network infrastructure with future-proof power delivery, the UTP6AX15MGY provides a factory-terminated solution with full TIA compliance and integrated documentation support.