i-PRO WV-QJB501-B Dome Camera Base Mount Bracket

i-PRO WV-QJB501-B Dome Camera Base Mount Bracket

Overview

The WV-QJB501-B is an aluminum die-cast base bracket engineered to mount i-PRO dome-style surveillance cameras to walls, ceilings, or racks. This bracket solves a specific installation constraint: environments where conduits are the only viable wiring pathway, or where in-ceiling and in-wall cable passages do not exist. The bracket's compact footprint (ø164 mm × 41.4 mm height) minimizes visual profile on the mounting surface while maintaining mechanical stiffness to support a dome camera housing under vibration or wind load. Three mounting orientations in a single bracket design reduce SKU proliferation across mixed installation scenarios.

Compatibility

The WV-QJB501-B mounts i-PRO dome-style camera housings. Dome camera footprints vary across product families and generations—compatibility is not universal. Before ordering, consult i-PRO's technical documentation (Control No. C0501) on i-PRO's product line website for the definitive list of compatible camera models for your specific unit. The bracket is available in three finishes: i-PRO white (WV-QJB501-W), black (WV-QJB501-B), and light gray (WV-Q193), allowing finish selection to match your dome housing color and installation environment aesthetics.

Installation Notes

Operating temperature range: –50 °C to +60 °C (–58 °F to +140 °F)—suitable for most indoor and sheltered outdoor deployments. The bracket must be securely fastened to its mounting surface using M4 × 8 mm fixing screws (five included; one spare). Install the mounting template (Template B, included) on your wall or ceiling surface to mark hole locations accurately. Route all conduit cables before final camera attachment to avoid strain on the dome housing connection point. Fastener selection must match your mounting surface material (concrete anchors for masonry, drywall anchors for drywall, stainless hardware for corrosive environments). Mass is approximately 450 g (0.99 lbs), so fastener load ratings should accommodate camera housing weight plus dynamic loads from vibration or thermal cycling.

What's in the Box

• 1x WV-QJB501-B base bracket (aluminum die cast)
• 5x M4 × 8 mm fixing screws (includes 1 spare)
• 1x Template B (installation template)
• 1x Operating Instructions (pdf)