APC by Schneider Electric AP4432A Rackmount Power Distribution Unit
Overview
The APC by Schneider Electric AP4432A is a 2U rackmount power distribution unit built for high-density server and network enclosures where reliable, metered AC distribution at 180–220V is the baseline requirement. Rated at 30A input with 18 total AC outlets — 16x IEC 60320 C13 and 2x IEC 60320 C19 — the AP4432A is sized for racks carrying a mix of 1U servers, network switches, and other IEC-connected equipment without forcing you to compromise on outlet count. If you're building out a datacenter row, a telecom equipment room, or a surveillance head-end rack, this unit is worth a close look within the APC by Schneider Electric power distribution lineup.
Key Features
- 30A / 180–220V Input: A 30A input rating means you can load the PDU closer to its practical ceiling without constantly watching utilization headroom. At 180–220V input, it covers the international single-phase range common in European and APAC datacenter environments as well as 208V US datacenter feeds — one SKU serves multiple facility voltage profiles.
- 18 AC Outlets (C13 + C19 Mix): Sixteen C13 outlets handle the vast majority of 1U rack equipment — servers, switches, KVM units, small UPS bypass loads — while two C19 outlets accommodate higher-draw devices up to their rated current. Eighteen outlets across 2U is a reasonable density for a non-managed PDU; you're not wasting rack real estate per outlet.
- IEC 60320 C13 / C19 Outlet Types: Both outlet types are globally standardized, which means no adapter hunting when you're cabling mixed-vendor equipment. C13 cords are universally available; C19 handles the heavier loads without requiring a separate strip or adapter chain.
- 2U Rackmount Form Factor: Two rack units is the standard footprint for a horizontal PDU at this outlet count. You're not trading three or four units of rack space for power distribution — a meaningful consideration in dense builds where every U counts toward revenue-generating compute or storage.
- LED Indicators: Onboard LED status indicators give field technicians a visual confirmation of power presence at the PDU without pulling up a management interface. On a non-managed unit, local indication is the only in-rack diagnostic signal you get — it matters during installation and troubleshooting.
- Operating Temperature -5°C to 45°C: The 45°C upper operating limit covers most enclosed equipment rooms and hot-aisle containment environments. If your ambient regularly exceeds 40°C without active cooling, verify your rack thermal design first — the AP4432A won't be the limiting factor in a properly cooled room, but it's worth noting the ceiling.
- Operating Humidity 5–95%: Non-condensing humidity tolerance across that full range means the unit is suitable for facilities without tight humidity control, including some industrial or warehouse-adjacent comms rooms.
- Certifications — REACH, RoHS, WEEE, PSE, TÜV-C, TÜV-NURTL: The combination of TÜV-C and TÜV-NURTL marks indicates third-party safety verification for both Canadian and US/international markets. RoHS and REACH compliance covers EU material directives. If your procurement team requires documented environmental and safety certifications for facility audits, these are all checkboxes the AP4432A covers out of the box.
- Black Finish: Standard black finish integrates cleanly into mixed-vendor racks. Not a functional differentiator, but worth noting for facilities teams with color-coded rack organization schemes.
Integration & Compatibility
The AP4432A fits standard 19-inch EIA/ECA-310 rack enclosures and operates on 50–60 Hz AC supply, covering both 50Hz international grids and 60Hz North American feeds at the supported voltage range. Its IEC 60320 outlet standard ensures compatibility with virtually any rack-mount server, switch, NVR, or storage appliance shipping with a standard IEC power cord. For deployments requiring per-outlet switching, outlet-level metering, or remote monitoring via SNMP, consider a managed PDU variant within the rackmount PDU category — the AP4432A is a basic distribution unit and does not include network management or metering functions. Pair it with an upstream UPS for runtime protection if your application cannot tolerate unplanned power interruptions; the AP4432A distributes conditioned power from a UPS but does not provide battery backup or surge suppression on its own. For rack and enclosure selection, confirm your rack's horizontal cable management depth accommodates a 2U PDU with IEC cords routed cleanly toward equipment.
Frequently Asked Questions
Q: What input voltage range does the AP4432A support?
A: The AP4432A operates on 180–220V AC input at 50–60 Hz, making it suitable for international single-phase feeds and 208V US datacenter environments.
Q: How many outlets does the AP4432A provide, and what types?
A: It provides 18 total outlets: 16x IEC 60320 C13 (standard server/switch connections) and 2x IEC 60320 C19 (for higher-draw equipment). Output voltage runs 200–208V.
Q: Does the AP4432A include network management or outlet metering?
A: No. The AP4432A is a basic (non-managed) rackmount PDU. It provides LED power indicators but no SNMP management, per-outlet switching, or remote monitoring capabilities. If those features are required, evaluate a managed PDU variant in the APC lineup.
Q: What certifications does the AP4432A carry?
A: The AP4432A holds REACH, RoHS, WEEE, PSE, TÜV-C, and TÜV-NURTL certifications, covering environmental compliance (EU), safety verification for North American and international markets, and Japanese PSE requirements.
Q: What is the rack space requirement for the AP4432A?
A: The AP4432A occupies 2U of standard 19-inch rack space in a horizontal rackmount orientation.
Q: What is the operating temperature range for the AP4432A?
A: Operating temperature range is -5°C to 45°C. Storage temperature range extends from -25°C to 65°C.
The AP4432A lands in a specific sweet spot: you need 18 IEC outlets across 2U, your facility runs 180–220V single-phase (208V US or European), and you don't need per-outlet switching or SNMP metering to complicate a straightforward distribution job. At 30A input with a C13/C19 outlet mix, this unit is sized for racks running moderate-density server or NVR-heavy surveillance head-end builds where the upstream UPS is handling the protection layer.
Technical Highlights:
- 30A / 180–220V Input Range: Running at 208V single-phase, a 30A feed gives you roughly 6,000W of distribution capacity (derate to 80% for continuous load = ~4,800W practical). That's enough headroom for 12–15 loaded 1U servers or a dense NVR-plus-switch stack without tripping the breaker on a cold boot surge.
- C13/C19 Outlet Mix: The 16xC13 + 2xC19 layout is a deliberate design for mixed-load racks. C19 handles PDUs, high-wattage switches, or compute nodes pulling 16–20A per device; C13 covers everything else. You won't need a separate strip for the odd high-draw device.
- TÜV-C / TÜV-NURTL Safety Marks: Both marks together indicate third-party verified safety for North American (UL/CSA-equivalent) and international markets. This matters for enterprise procurement teams running facilities audits or for deployments in regulated environments where self-certified power equipment won't clear facilities management review.
Deployment Considerations:
- The AP4432A has no network management port — if your operations team needs remote outlet cycling or load monitoring, this is the wrong unit. Plan for a managed PDU variant from the same family if your NOC workflow requires it.
- Operating ceiling is 45°C ambient. In hot-aisle containment setups where local ambient can spike during cooling failures, confirm your facility's thermal runaway response time — the PDU will handle normal operating conditions but offers no active thermal protection.
For a surveillance head-end rack running 8–12 NVR appliances plus a managed PoE switch stack on a 208V feed, the AP4432A handles the distribution layer cleanly without the overhead of a managed PDU you won't actually use. It's a straightforward fit for facilities where the UPS upstream is already handling protection and monitoring.
