Panduit SGABM20-AT-C0 Super-Grip Adhesive Cable Tie Mount
The Panduit SGABM20-AT-C0 Super-Grip adhesive cable tie mount delivers UV-resistant, high-temperature performance for outdoor and exposed-environment installations. Built from weather-resistant Nylon 6.6 with an acrylic adhesive backing, this 0.75" × 0.75" mount secures miniature, intermediate, and standard cross-section cable ties to non-metallic surfaces in direct sunlight, extreme heat, and variable weather conditions. Supplied in strips of two mounts, the SGABM20-AT-C0 provides quick, tool-free anchoring for perimeter camera runs, rooftop conduit routing, parking structure cable management, and solar farm wire bundling where traditional screw mounts aren't practical.
Key Features
- UV-resistant Nylon 6.6 construction withstands years of direct sun exposure without brittleness or degradation
- Acrylic adhesive backing rated for high-temperature outdoor use, maintains bond strength in extreme heat
- 0.75" × 0.75" (19.1mm × 19.1mm) low-profile base fits tight spaces and curved surfaces
- Compatible with Super-Grip miniature, intermediate, and standard cross-section cable ties for flexible bundling options
- Supplied in strips of 2 mounts for faster layout and installation on long cable runs
- Black finish blends into dark surfaces for discrete cable management on exposed facades
- 100-pack quantity supports medium to large commercial deployments
The SGABM20-AT-C0's weather-resistant Nylon 6.6 material is engineered for long-term outdoor exposure. Unlike standard nylon formulations that become brittle under UV radiation, this compound maintains tensile strength and impact resistance through temperature swings, moisture cycling, and continuous sunlight. The acrylic adhesive system is specifically formulated for high-temperature environments—critical for surfaces that reach 140°F+ in direct summer sun, such as metal conduit, dark-colored enclosures, or rooftop cable trays. This adhesive chemistry resists creep and maintains peel strength where rubber-based or general-purpose adhesives would fail, eliminating the tie-mount failures that plague outdoor installations six to twelve months after deployment.
Each mount's 0.75" square footprint delivers 0.56 square inches of bonding surface while remaining compact enough for crowded j-boxes, tight radius bends, and narrow panel edges. The integrated tie slot accepts Panduit's full range of Super-Grip cross-sections, letting installers switch from 1/8" miniature ties for low-voltage sensor wiring to 3/16" intermediate ties for multi-conductor camera bundles to 1/4" standard ties for outdoor-rated Cat6A and coax runs—all using the same mount hardware. The strip-of-two format reduces installation time on linear runs: peel, position two mounts at once, press, and move to the next section. For perimeter intrusion detection systems with hundreds of feet of burial-rated cable surfacing at intervals, or solar-powered camera arrays with exposed DC power feeds, this approach cuts deployment hours while maintaining consistent 12" to 18" spacing.
The SGABM20-AT-C0 meets the Panduit Super-Grip standard for outdoor cable management: UV-stabilized material, high-temp adhesive, and cross-section compatibility engineered for commercial security and power installations where cable routing must survive uncontrolled environments. When your deployment requires adhesive anchoring on painted steel, powder-coated aluminum, fiberglass enclosures, or smooth concrete—and screw mounts would compromise finish, void seals, or exceed labor budgets—this mount provides the grab-and-hold performance that keeps perimeter and rooftop cable runs in place for the system's service life.
