Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: 800-00001_00237
ACTi Pipleine Kiosk 42I - 800-00001_00237
- ONVIF-compliant integration supports deployment alongside third-party VMS platforms.
- Ethernet connectivity enables direct command-center network integration at installation.
- 100–240V AC power input supports fixed control-room installations globally.
$367.00 $348.99 Save $18.01The item has been added -
ACTi
SKU: PMAX-0102
ACTi PMAX-0102 Straight Tube without Bracket
- Bracket-free rack-mount design reduces component count and simplifies installation.
- Compatible with ACM-7411, TCM-7411, and TCM-7811 camera enclosure profiles.
- Zinc-plated construction supports cable routing within indoor rack environments.
$272.00 $200.99 Save $71.01The item has been added -
ACTi
SKU: PMAX-0103
ACTi PMAX-0103 Pendant Tube with Bracket
- Supports pendant and rack mounting modes to adapt to existing ceiling infrastructure.
- Compatible with ACTi ACM-7xxx, TCM-7xxx, and KCM-7xxx dome camera families.
- Assembly weight of 1.9 lb; verify ceiling load rating before installation.
$408.00 $301.99 Save $106.01The item has been added -
ACTi
SKU: PMAX-0104
Acti PMAX-0104 Indoor/Outdoor Extension Tube
Extension tube for Acti cameras with PoE power, indoor/outdoor rated
- PoE (802.3af) powered—no extra wiring needed for indoor or outdoor setup
- Recessed mounting support fits Acti multi-sensor and fixed camera systems
- Outdoor-rated housing handles both interior and exterior deployment environments
$363.00 $268.99 Save $94.01The item has been added -
ACTi
SKU: PMAX-0110
Acti PMAX-0110 Indoor Mount Kit for KCM-8111
Ceiling/wall mount kit for KCM-8111 PTZ camera with PoE power
- Single PoE (802.3af) connection powers camera and eliminates extra wiring
- Designed for Acti KCM-8111 PTZ systems in indoor controlled environments
- Supports 2MP resolution with integrated structural support for secure mounting
$103.00 $102.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0112
Acti PMAX-0112 Extension Tube
Extension tube for D/E-series camera positioning and reach
- PoE-powered—no auxiliary supply needed for networked deployment
- Compatible with Acti D5x, D9x, E5x, E9x, and E9xx/M cameras
- Rack-mount design for flexible indoor surveillance installations
$114.00 $113.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0115
Acti PMAX-0115 Pendant Mount for Z950
Pendant ceiling mount for Acti Z950 with PoE power
- Ceiling-suspended pendant configuration for indoor deployments
- PoE (802.3af) powered—no separate power infrastructure needed
- 2MP resolution compatible with Z950 camera system
$103.00 $102.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0127
Acti PMAX-0127 Mount Kit
19-inch rack mount for Acti 20MP surveillance cameras
- Fits Z83, Z84, A811, A818 camera models in standard equipment racks
- Organized cable routing design for centralized security deployments
- Compact 152mm × 74mm form factor, 1.8 lb white steel construction
$172.00 $171.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0201
Acti PMAX-0201 Outdoor Housing with Heater and Fan
IP66 outdoor housing with integrated heater and fan for 20MP+ cameras
- Maintains optimal temperature in seasonal extremes with built-in heater and fan
- IP66 protection shields 20MP+ resolution systems in harsh outdoor environments
- PoE (802.3af) powered with ONVIF compatibility for Acti and third-party cameras
$191.00 $190.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0202
Acti PMAX-0202 Outdoor Housing for ACM-5 and TCM-5
IP66 outdoor housing for ACM-5 and TCM-5 rack-mount cameras
- IP66 weatherproof and dust protection for outdoor surveillance
- Rack mount design for structured installation and cable management
- Compatible with ACTi ACM-5 and TCM-5 camera series
$139.00 $138.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0204
Acti PMAX-0204 Heavy Duty Outdoor Housing with Heater
Heated outdoor housing for 2MP cameras in freezing conditions
- Integrated heater maintains operation in freezing temperatures year-round
- PoE 802.3af power eliminates separate power runs at camera location
- Wall and rack mount options fit mixed installation environments
$402.00 $297.99 Save $104.01The item has been added -
ACTi
SKU: PMAX-0205
Acti PMAX-0205 Heavy Duty Outdoor Housing with Bracket
Heavy duty outdoor housing with PoE bracket for ACTi cameras
- PoE (802.3af) powered—no separate electrical runs required
- Weather-resistant construction rated for outdoor surveillance
- Bracket assembly mounts securely for new and retrofit installations
$409.00 $357.99 Save $51.01The item has been added -
ACTi
SKU: PMAX-0206
Acti PMAX-0206 PoE Heavy Duty Outdoor Housing
Rack-mounted PoE outdoor housing with integrated heat management
- PoE (802.3af) powered—no separate power supply required for outdoor deployments
- Integrated heat management maintains thermal stability in demanding outdoor environments
- Heavy-duty enclosure protects surveillance equipment and network gear from weather exposure
$604.00 $446.99 Save $157.01The item has been added -
ACTi
SKU: PMAX-0302
Acti PMAX-0302 Gooseneck Mount with Bracket
Gooseneck mount with bracket for flexible ACTi camera positioning
- PoE+ powered—no external supply needed with compatible infrastructure
- Flexible angle adjustment for precise camera sightline positioning
- Rated for indoor and outdoor deployment on standard mounting surfaces
$527.00 $389.99 Save $137.01The item has been added -
ACTi
SKU: PMAX-0303
Acti PMAX-0303 Gooseneck Mount without Bracket
Gooseneck mount for Acti 2MP PoE+ cameras with adjustable positioning
- Flexible gooseneck design without bracket for discreet indoor mounting
- PoE+ (802.3at) powered, compatible with Acti 2MP camera systems
- Adjustable positioning geometry for optimized sightlines in surveillance setups
$385.00 $285.99 Save $99.01The item has been added -
ACTi
SKU: PMAX-0305
Acti PMAX-0305 Heavy Duty Wall Mount
Heavy duty wall mount for ACTi fixed cameras with PoE+ power
- Supports PoE+ (802.3at) cameras, eliminating separate power runs to the mount location.
- Zinc-plated steel construction resists corrosion in indoor and semi-outdoor commercial environments.
- Verified compatibility with ACTi ACM-7411, TCM-7411, and TCM-7811 fixed camera models.
$142.00 $141.99 Save $0.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.