Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Vivotek
SKU: CMA-B05
Vivotek CMA-B05 Wall Mount Kit for IR Illuminators
Wall mount kit for Vivotek CaMate IR illuminators, indoor/outdoor
- Engineered for CaMate series IR illuminators with optical alignment
- Wall-mount design supports flexible positioning in varied environments
- Rated for both indoor and outdoor deployments with durable construction
$206.00 $205.99 Save $0.01The item has been added -
Vivotek
SKU: CMA-B06
Vivotek CMA-B06 Wall Mount Kit for CaMate IR
Wall mount kit for Vivotek CaMate IR illuminators on vertical surfaces
- Designed for CaMate series IR illuminators with secure mechanical fastening
- Professional-grade metal construction for durable low-light surveillance setups
- Vertical wall mounting enables discreet IR supplemental lighting deployment
$137.00 $136.99 Save $0.01The item has been added -
Vivotek
SKU: CMA-E01
Vivotek CMA-E01 Wall Mount Kit for CaMate IR
Wall mount kit for Vivotek CaMate IR illuminators on vertical surfaces
- Designed for CaMate IR illuminators to position low-light night vision lighting
- Wall mount installation on vertical surfaces for flexible surveillance coverage
- White housing integrates with Vivotek surveillance systems and existing setups
$71.00 $70.99 Save $0.01The item has been added -
Wasp
SKU: 633808927936
Wasp 633808927936 Handle kit for Wasp DT90/DT92
- Direct-replacement handle kit for DT90 and DT92 mobile computers.
- Attaches to factory mounting points with no special tools required.
- Improves drop resistance and ergonomic carry in warehouse/logistics deployments.
$99.00 $98.99 Save $0.01The item has been added -
Wasp
SKU: 633809003271
Wasp 633809003271 Wasp WPL618 Peel Off Kit
- Automates label separation, reducing manual handling in high-volume labeling runs.
- Engineered for Wasp WPL618 thermal printers — verify model compatibility before install.
- Mechanical kit requires alignment with label advance mechanism; service manual recommended.
$329.00 $300.99 Save $28.01The item has been added -
Wasp
SKU: 633809007668
Wasp 633809007668 WPL408 Peel Off Kit
- Automates label separation to eliminate manual peeling bottlenecks in high-volume shifts.
- Compatible with WPL-series thermal printers; verify model fit before deployment.
- Rated for storage from -40°F to 140°F, supporting warehouse and cold-chain environments.
$299.00 $267.99 Save $31.01The item has been added -
Wasp
SKU: 633809008207
Wasp 633809008207 WPL614 Internal Rewinding Kit
- Adds automatic internal media rewind to eliminate manual label stacking mid-run.
- Designed for Wasp WPL614 printers; verify model compatibility before ordering.
- Requires technician-level installation inside the printer chassis for proper alignment.
$295.00 $277.99 Save $17.01The item has been added -
Add to Cart The item has been addedZebra
SKU: BRKT-DPA-SK1-01
Zebra BRKT-DPA-SK1-01 PrintKiosk Mounting Bracket
Secure kiosk mount for Zebra ZD4 and ZD6 thermal printers
- Bolt-down bracket with included fasteners for standard kiosk frames
- Eliminates printer rattle and misalignment in self-checkout and POS stations
- Purpose-built for ZD4/ZD6 compatibility without adapter hardware needed
$365.36 $220.99 Save $144.37The item has been added -
Zebra
SKU: BRKT-DPA-SK1-02
Zebra BRKT-DPA-SK1-02 PrintKiosk Mounting Bracket
Fixed kiosk bracket for Zebra ZD4/ZD6 thermal printers
- Mounts ZD4 and ZD6 series printers in fixed-position kiosk setups
- Quick-deploy design for self-service and point-of-transaction printing
- Stable mounting for high-volume retail, logistics, and hospitality use
$365.36 $218.99 Save $146.37The item has been added -
Zebra
SKU: BRKT-ET4X-DSKPS-01
Zebra BRKT-ET4X-DSKPS-01 Mounting Bracket
Presentation stand bracket for Zebra ET4X hands-free scanning
- Secure mounting for ET4X devices in fixed presentation deployments
- Stable mechanical support for retail checkout and POS applications
- Direct compatibility with Zebra presentation stand systems
$22.35 $21.99 Save $0.36The item has been added -
Zebra
SKU: BRKT-NWPC-DSKPS-01
Zebra BRKT-NWPC-DSKPS-01 Mounting Bracket for Connect Hub
Desktop mounting bracket for Zebra Connect Hub fixed installations
- Engineered for Connect Hub devices in warehouse and logistics setups
- Black steel construction supports stable stationary desktop deployment
- Quick-install fixed mount designed for IT and network infrastructure use
$24.33 $23.99 Save $0.34The item has been added -
Add to Cart The item has been addedZebra
SKU: BRKT-SCRD-SMRK-01
Zebra BRKT-SCRD-SMRK-01 Wall Mounting Bracket
Wall bracket for Zebra TC8X and WT6 mobile computer docking
- Secure wall-mount installation for fixed charging and data sync stations
- Compatible with Zebra TC8X and WT6 handheld mobile computers
- Requires standard wall mounting hardware; includes power supply
$230.16 $177.99 Save $52.17The item has been added -
Add to Cart The item has been addedZebra
SKU: KT-152097-03
Zebra KT-152097-03 Kiosk Wall Mount Bracket Kit
Wall-mount bracket kit for Zebra kiosk systems in retail and hospitality
- Semi-permanent design allows repositioning without full reinstallation
- Rigid support prevents drift and vibration in high-traffic environments
- Eliminates floor footprint while keeping displays at eye level for easy access
$95.81 $94.99 Save $0.82The item has been added -
Zebra
SKU: KT-152097-04
Zebra KT-152097-04 Wall Mount Kit for CC6000
Wall mount kit for Zebra CC6000 fixed scanning stations
- Precision fit to CC6000 form factor eliminates play for stable barcode alignment
- Wi-Fi antenna clearance preserves wireless connectivity without obstruction
- Wall-mounted positioning at ergonomic heights for warehouse and retail workflows
$114.00 $113.99 Save $0.01The item has been added -
Add to Cart The item has been addedZebra
SKU: KT-152098-03
Zebra KT-152098-03 CC6000 Wall Mount Bracket
Wall mount bracket for Zebra CC6000 series fixed-position scanning
- Engineered specifically for CC6000 series, ensuring a secure, verified fit.
- Thin mount profile minimizes wall footprint for space-constrained deploy zones.
- Includes mounting hardware in-box; no additional components required to install.
$80.75 $79.99 Save $0.76The item has been added -
Zebra
SKU: MNT-VC80-ADPA1-1
Zebra MNT-VC80-ADPA1-1 VC80 U-Mount Adapter for VC50
VC80 adapter for VC50 U-mount—upgrade devices without replacing infrastructure
- Mounts VC80 computers directly to existing VC50 U-mount brackets—no structural mods needed.
- Passive mechanical adapter requires no power, firmware, or configuration steps to deploy.
- Enables vehicle-by-vehicle VC80 rollout while legacy VC50 mounts remain in service.
$231.35 $178.99 Save $52.36The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.