Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
STI
SKU: STI-1284
STI Single Gang Mounting Adapter for STI-1219 and - STI-1284
- Mounts STI-1219 and STI-1229 hardware into a standard single gang electrical box.
- Eliminates custom drilling or oversized enclosures on retrofit and new-construction jobs.
- Operates at 9V DC, matching existing STI control and strike assembly wiring.
$21.99The item has been added -
STI
SKU: KIT-BB0SS
STI Slim/Mullion Surface Mount Back Box for NoTouch® Stainless Stee...
Slim surface mount back box for HID readers on stainless steel doors
- Surface mount design fits mullion and stainless steel door frames
- Compatible with HID credential reader systems at 9VDC
- Compact profile minimizes protrusion on high-traffic entry points
$23.99The item has been added -
STI
SKU: STI-9604-SS
STI Steel Web Stopper®, for Mini Smoke Detectors, Flush Mount - Sta...
Patented steel cage protects mini smoke detectors from severe vandalism
- Medical-grade 304 stainless steel resists corrosion in healthcare and food-prep zones.
- Rated −40°F to 212°F, suitable for controlled environments with extreme temperature swings.
- Tool-free flush-mount install fits standard ceilings with no structural modification needed.
$83.99The item has been added -
STI
SKU: STI-9609-SS
STI Steel Web Stopper®, High Profile, Flush Mount, Stainless Steel
Stainless steel smoke detector guard for high-abuse environments
- Stainless steel construction delivers corrosion resistance in demanding indoor environments.
- Flush-mount profile integrates with standard ceiling and wall configurations, depth 2.5".
- Patented abuse-resistant design protects smoke detectors in high-risk institutional facilities.
$96.99The item has been added -
STI
SKU: STI-1221A4X-WD
STI STI-1221A4X-WD Strobe Damage Stopper and Enclosure Back Box
- NEMA Type 4X stainless steel construction withstands salt-fog, washdown, and corrosive exposure.
- 8.5" × 6.5" × 3.5" frame fits standard 4-inch-depth strobe mounting configurations.
- Ships with four #8-32 cap screws and Rawl plugs for immediate wall-mount deployment.
$269.99The item has been added -
STI
SKU: STI-1221E
STI STI-1221E Strobe Damage Stopper & Flush Mount Open Back Box
Flush-mount strobe housing with damage protection for alarm devices
- Open back box design simplifies conduit entry and wiring termination
- Protective housing construction shields strobe components from physical damage
- 6.5" W × 3.0" H × 3.5" D flush-mount footprint for wall installation
$59.99The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-13000NC
STI STI-13000NC Universal Stopper Audio Intercom Flush Mount
Flush-mount audio intercom with low-profile dome, 24VDC two-way talk
- Two-way audio communication lets you screen visitors before entry
- Low-profile flush dome design minimizes visual impact in lobbies
- 24VDC operation integrates with standard access control infrastructure
$57.99The item has been added -
STI
SKU: STI-13010CR
STI STI-13010CR Universal Stopper without Horn Flush Mount
Flush-mount universal stopper for 24VDC STI intercom systems
- 24VDC hardwired operation integrates into door access control infrastructure
- Flush-mount design fits standard doorway frames without surface protrusion
- Functions without integrated horn; pairs with separate audio signaling systems
$82.99The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-13010FR
STI STI-13010FR Universal Stopper Flush Mount Intercom
Passive 24VDC flush-mount intercom for mixed-vendor access control
- Passive interface integrates with existing systems without amplifier conflicts
- Flush-mount design installs recessed into door frames for clean profile
- 24VDC operation connects directly to standard access control power circuits
$72.99The item has been added -
STI
SKU: STI-13010NY
STI STI-13010NY Universal Stopper Intercom Flush Mount
- Polycarbonate cover shields flush-mount intercoms and keypads from vandalism and dust.
- Operates at 24VDC, integrating directly into standard access control power infrastructure.
- ADA-compliant low-profile design fits most flush-mount intercom and keypad footprints.
$84.99The item has been added -
STI
SKU: STI-7520OB
STI STI-7520OB Protective Cabinet with Open Backbox and Key Lock
Key-lock protective cabinet with open backbox for access control hardware
- Open backbox design accommodates flexible wiring and component placement
- Key lock security mechanism protects mounted readers and strike plates
- Wall-mounted enclosure for entry points and controlled access zones
$183.99The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-7700
STI STI-7700 Polycarbonate Keypad Cover with Open Back Box
- Polycarbonate shell rated −40°F to 250°F sustains impact resistance across full range.
- Open back box fits existing reader assemblies without modifying wiring or mounting hardware.
- Protects keypads in high-traffic, outdoor, or washdown environments, extending reader lifespan.
$63.99The item has been added -
STI
SKU: STI-7720
STI STI-7720 Polycarbonate Keypad Cover with Enclosed Back Box
- Molded polycarbonate shell shields keypad wiring and connections from moisture and tampering.
- Enclosed back box protects mounting hardware and internal connections in exposed environments.
- Includes anchors and screws for direct mounting to door frames in retrofit or new installs.
$67.99The item has been added -
STI
SKU: STI-7730
STI STI-7730 Polycarbonate Keypad Cover with Enclosed Back Box
Polycarbonate keypad cover with enclosed back box for outdoor access control
- IP-rated weatherproof enclosure protects keypads in outdoor and high-traffic indoor zones
- Enclosed back box simplifies wiring and provides integrated wall-mount support structure
- Polycarbonate construction resists moisture, dust, and temperature fluctuations at entry points
$89.99The item has been added -
STI
SKU: STI-9102
STI STI-9102 Small Thermostat Protector Flush Mount with Lock
Flush-mount thermostat lock for controlled HVAC access in commercial buildings
- Keyed lock blocks unauthorized thermostat adjustments in tenant and public zones.
- Flush-mount polycarbonate housing installs directly to drywall using supplied fasteners.
- Air circulation holes maintain accurate sensor readings without disrupting HVAC operation.
$29.99The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-9601
STI STI-9601 Steel Web Stopper Low Profile Flush Mount
- Low-profile flush-mount steel web stopper shields smoke detectors
- Patented web design absorbs impact in high-traffic and institutional sites
- Drops onto standard smoke detector ceiling mount cutouts
$52.99The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.