Camera Cap Kits
Showing Results for Camera Cap Kits
-
Add to Cart The item has been addedHanwha
SKU: SBP-215HMW
Hanwha SBP-215HMW White Cap Adapter
White cap adapter for Hanwha cameras with heat-reflective finish
- Weatherproof plastic construction protects against rain, snow, and UV
- White finish reflects solar heat to reduce thermal buildup on camera
- Tool-free quick-attach mounting with included hardware and instructions
In stock · Ships same business day$40.00 $39.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-168HM
Hanwha SBP-168HM Ceiling Mount Cap Adapter for XNP-6120H
Ceiling mount adapter for XNP-6120H with IP66 weather sealing
- XNP-6120H exclusive fit—verify camera model before ordering
- IP66 rated for dust and water resistance in covered outdoor locations
- Operates -20°C to 50°C; weather-resistant materials resist corrosion
In stock · Ships same business day$79.00 $59.99 Save $19.01The item has been added -
Hanwha
SKU: SBP-120HMW
Hanwha SBP-120HMW Cap Adaptor White
Aluminum-core mounting adaptor for 13+ Hanwha dome cameras
- Aluminum core with plastic cap, ø135 x 65mm, weighs 230g for stable ceiling mount
- Fits QNV-C, QND, and LND series cameras with precision tolerances—no shimming required
- RAL9003 white finish blends seamlessly into indoor ceilings and wall trim
$49.00 $48.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-200HMW
Hanwha SBP-200HMW White Cap Adapter
White cap adapter for Hanwha cameras, indoor & outdoor rated
- Weather-resistant design handles rooftop and exterior wall installations
- White finish matches ceilings and walls for discrete multi-camera deployments
- Versatile cap adapter form factor supports ceiling, wall, and pendant mounting
In stock · Ships same business day$49.00 $48.99 Save $0.01The item has been added -
FLIR
SKU: CM-CAPX-G4F
FLIR Pendant Cap Kit for CM-6412 Hemispheric Cameras - CM-CAPX-G4F
- Pendant cap kit for CM-6412 hemispheric cameras
- Adapts hemispheric cameras to conduit-mounted pendant installs
- Maintains environmental sealing during overhead deployment
$114.00 $113.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-099HMW
Hanwha SBP-099HMW White Mounting Cap
White aluminum mounting cap for QND/QNF cameras, PF 1 1/2" thread
- RAL9003 powder-coat finish resists corrosion in covered outdoor environments
- Hand-tight PF 1 1/2" mount requires no tools for field installation or removal
- Ø107 × 47mm compact size fits six Hanwha surveillance camera models
In stock · Ships same business day$34.00 $33.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-167HM
Hanwha SBP-167HM Cap Adapter, Ivory
PF 1 1/2" threaded cap adapter for XND-6081V/8081V cameras, ivory
- PF 1 1/2" male thread mount integrates directly with XND series housings
- Ivory finish blends into ceiling and wall installations without visibility
- Precision OEM accessory maintains consistent mechanical tolerances across installs
In stock · Ships same business day$50.00 $49.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-187HM
Hanwha SBP-187HM Cap Adapter, Ivory
PF 1 1/2" cap adapter for XNV-6081/8081 ceiling mounts, ivory
- Standard PF 1 1/2" male thread connects to existing mounting infrastructure
- Ivory finish blends into indoor ceiling grids and light-colored surfaces
- Precision-engineered tolerances prevent play and vibration on mounted camera
In stock · Ships same business day$50.00 $49.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-250HMW
Hanwha SBP-250HMW White Cap Adapter
White aluminum cap adapter for Hanwha PNM ceiling-mount cameras
- PF 1 1/2" male thread mounts directly to conduit and junction boxes
- Aluminum construction resists vibration and temperature cycling
- White finish blends into light ceilings; works with PNM-9084QZ/QZ1/C16083RVQ/C32083RVQ
In stock · Ships same business day$75.00 $74.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-300HMS6
Hanwha SBP-300HMS6 Stainless Steel Cap Adaptor
Stainless steel cap adaptor for XNV-6080RS, XNV-8080RS, XNV-6120RS cameras
- Stainless steel construction resists corrosion in outdoor and indoor environments
- Protects camera optics from weather, UV exposure, dust, and physical damage
- Compatible with three Hanwha professional surveillance camera models
$485.00 $363.99 Save $121.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBP-315HMW
Hanwha SBP-315HMW White Cap Adapter
White cap adapter for Hanwha dual-sensor cameras with TR20 mount
- Supports PNM-9084RQZ and PNM-9085RQZ multi-sensor platforms
- 6kg load capacity with aluminum construction and RAL9003 white finish
- Compact ø330 x 74mm profile minimizes visual intrusion in flush mounts
In stock · Ships same business day$70.00 $69.99 Save $0.01The item has been added
Camera Cap Kits
Camera cap kits provide mounting hardware and finishing components that support secure installation and a clean appearance for surveillance devices. These kits help standardize installs across projects while protecting internal fasteners and maintaining environmental sealing.
Plan Your Deployment
- Camera model compatibility and mounting pattern alignment
- Indoor vs outdoor sealing requirements
- Surface type and structural support considerations
- Aesthetic finish standards for customer-facing areas
- Future service access and maintenance planning
Camera Cap Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 10 working models of camera cap kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66 |
| Type | Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.