Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Speco Technologies
SKU: TVIUTP4
Speco Technologies TVIUTP4 4-Port TVI over UTP Balun
4-port TVI balun for HD video over Cat5e/Cat6 cabling
- Transmits four independent 5MP TVI streams simultaneously over Cat5e/Cat6 cabling.
- Supports up to 2592x1944 resolution, preserving full HD detail across all four channels.
- Compact 4.3"×3.2"×1" form factor fits telecom racks or wall enclosures; 3-year warranty.
$40.80 $39.99 Save $0.81The item has been added -
Speco Technologies
SKU: TVIUTPA
Speco Technologies TVIUTPA Active TVI Video Balun (Transmitter/Re
Active TVI balun for 8MP video over extended cable runs
- Transmits and receives 8MP TVI video at up to 3840x2160 over extended cable runs.
- ONVIF Profile I support integrates with compliant VMS and NVR platforms.
- DC 12V operation in a 2.3"×1.9"×1.6" housing simplifies distributed deployments.
$118.40 $117.99 Save $0.41The item has been added -
Speco Technologies
SKU: TVIUTPPT
Speco Technologies TVIUTPPT HD-TVI Balun over UTP with Pigtail
HD-TVI balun for standard UTP cable runs up to 300 meters
- Transmits HD-TVI video over Cat 5e/6 UTP up to 300 m, no coax required.
- Passive design needs no external power, cutting installation complexity.
- 50 Hz–60 MHz bandwidth with 32°F–131°F operating range suits most installs.
$16.10 $15.99 Save $0.11The item has been added -
Speco Technologies
SKU: UTPAUDIO
Speco Technologies UTPAUDIO Send Audio up to 1 Mile over CAT5E
Audio transmission up to 1 mile over standard CAT5E cable
- Transmits audio up to 1 mile over CAT5E, eliminating dedicated shielded cable runs.
- ONVIF Profile I compliant, integrating cleanly into existing IP security architectures.
- 3-year warranty covers long-term deployments in campus and multi-building installations.
$43.75 $42.99 Save $0.76The item has been added -
Speco Technologies
SKU: VGABNC
Speco Technologies VGABNC VGA to Video Connector
VGA to video connector with ONVIF Profile I for IP surveillance
- Converts VGA at 640×480 resolution to video output for hybrid surveillance integration.
- ONVIF Profile I compliant, enabling plug-and-play use with standard video management systems.
- Runs on regulated DC 5V/1A power, minimizing UPS load in low-power rack deployments.
$151.90 $150.99 Save $0.91The item has been added -
Speco Technologies
SKU: VGAHD2
Speco Technologies VGAHD2 VGA to HDMI Converter
VGA to HDMI converter for legacy video to modern displays
- Converts analog VGA to digital HDMI, preserving video fidelity for monitoring.
- Plug-and-play installation; no software needed, ships with 5VDC 1A power supply.
- Compact 6.62"×3"×1" form factor at 0.37 lbs fits rack, wall, or portable installs.
$114.50 $113.99 Save $0.51The item has been added -
Add to Cart The item has been addedSpeco Technologies
SKU: VIDGL
Speco Technologies VIDGL Video Ground Loop Isolator
Inline coaxial isolator eliminates 60 Hz hum in analog CCTV video
- Passive galvanic isolation requires no power, enabling immediate inline deployment.
- Eliminates 60 Hz and 50 Hz hum bars from coaxial video feeds without cable replacement.
- Compact 5.6 x 3.8 x 1.3 in form factor fits tight rack or wall-mount installations.
$55.30 $54.99 Save $0.31The item has been added -
Speco Technologies
SKU: VIDGLT
Speco Technologies VIDGLT HD-TVI Power Ground Loop Isolator
Passive HD-TVI ground loop isolator eliminates 60 Hz hum on coaxial runs
- Passive design requires no external power, simplifying drop-in coaxial installations.
- Eliminates 60 Hz ground loop hum on HD-TVI runs at 720p and 1080p without signal loss.
- Installs at camera or DVR/NVR end on RG59/RG6 coax; backed by a 3-year warranty.
$64.40 $63.99 Save $0.41The item has been added -
Speco Technologies
SKU: VIDUTP
Speco Technologies VIDUTP Video over Cat-5e or UTP Pair
Video and audio over Cat-5e or UTP—no coax or power needed
- Passive operation requires no external power, simplifying retrofit and new deployments.
- Transmits composite video and audio over Cat-5e or UTP, eliminating dedicated coax runs.
- Supports NTSC and PAL analog formats, compatible with cameras, DVRs, and legacy gear.
$47.40 $44.99 Save $2.41The item has been added -
Speco Technologies
SKU: TVICOAXVP
Speco TVICOAXVP Active Balun TVI Video & 24V Power
TVI video + 24V power over single coax cable, up to 5MP
- Carries TVI video up to 5MP (2592×1944) and 24V DC over a single coax run.
- Accepts AC or DC 24V input, simplifying power sourcing across varied field installations.
- Compact 1.9″×4.4″×1″ body fits wall boxes and conduit terminations; backed by 3-year warranty.
$65.80 $64.99 Save $0.81The item has been added -
STI
SKU: EM362408A
STI EM362408A Metal Protective Cabinet with AC/Heater
Metal cabinet with integrated AC/heating for access control equipment
- Integrated AC and heating maintains thermal stability for sensitive electronics
- Metal construction with powder-coated finish protects equipment from tampering
- Wall-mount and surface-mount capable for flexible installation in indoor/outdoor
$6,298.00 $3,786.99 Save $2,511.01The item has been added -
STI
SKU: EM362408WA
STI EM362408WA Metal Protective Cabinet with Window and AC/Heater
- UL Type 4 rated enclosure protects electronics in outdoor and harsh environments.
- Integrated AC and heater maintains stable internal temps for sensitive control panels.
- Transparent window enables equipment status checks without opening the cabinet.
$6,368.50 $3,844.99 Save $2,523.51The item has been added -
STI
SKU: EPSNK
STI EPSNK EnviroArmour® Slot Nut Kit
- Mechanically couples STI strike assemblies to standard door frame slot configurations.
- Engineered for 9VDC STI lock and strike platforms for reliable electronic access control.
- Installation requires a 7mm masonry bit; gasket seals protect wiring from water ingress.
$53.99The item has been added -
STI
SKU: STI-HK3
STI Heater Field Replacement Kit for STI-1200A-HTR - STI-HK3
- Restores heater function in STI-1200A-HTR strikes without full assembly replacement.
- Operates at 9VDC, matching standard access control power supply outputs.
- Field-replaceable design minimizes installation downtime during cold-weather maintenance.
$851.22 $526.99 Save $324.23The item has been added -
STI
SKU: KIT-06297F
STI KIT-06297F Lock/Strike Accessory Kit - F Spacer
F Spacer kit for HID lock/strike systems at 9VDC
- F-series spacer corrects gap alignment between strike plate and door frame at install.
- Designed for HID credential environments; operates at 9VDC for low-voltage door hardware.
- Includes wall fixings, anchors, and cable entry inserts for clean surface-mount deployment.
$42.99The item has been added -
STI
SKU: KIT-6702
STI KIT-6702 Tamperproof Screw Kit
- Prevents unauthorized fastener removal on STI lock and strike hardware installations.
- Compatible with HID credential-based access control infrastructure at 9VDC.
- Drop-in replacement for standard fasteners; no special tools required.
$9.99The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.