Refine by

No filters applied

Electrical & Power

Electrical and power components provide the foundation for reliable surveillance and access control system operation. Proper power delivery, distribution, and protection planning ensures stable performance and reduces system downtime in commercial environments.

Plan Your Deployment

Voltage requirements and device compatibility
Power budgeting across cameras and access devices
Centralized vs distributed power design
Surge protection and environmental safeguards
Redundancy and uptime planning

Get Recommendations Infrastructure

Sub categories

Adapter Boxes & Plates

6 items

Conduit Adapters

13 items

Conduit Bases, Boxes, & Covers

21 items

Converter Plates

0 item

Electrical Boxes & Enclosures

101 items

Gang Plates

12 items

Installation Boxes

2 items

Junction Boxes

21 items

Power Supplies

245 items

Showing Results for Electrical & Power

Compare

Out of stock
HES

SKU: AQD2-8F8R1

HES AQD2-8F8R1 Power Supply 2A 12/24VDC Charger

Dual-voltage 2A power supply with 8 fused relays for access control
Special Order · Ships in 2-3 weeks

$294.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQD2B

HES AQD2B Power Supply Board 2A 12/24VDC

Compact 2A power board with field-selectable 12/24VDC output and integrated charging
Special Order · Ships in 2-3 weeks

$131.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
HES

SKU: AQD4

HES AQD4 4A 12/24VDC Power Supply with Integrated Battery Charger

Dual-voltage 4A supply with built-in battery charger for access control
In stock · Ships same business day

$443.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQD4-1R

HES AQD4-1R 4A Dual Voltage Power Supply with Charger

Dual-voltage 4A supply with integrated charger for access control
Special Order · Ships in 2-3 weeks

$260.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQD4-4C1R1

HES AQD4-4C1R1 Supervised Power Supply 12/24VDC

Dual-voltage supervised supply with active fault detection for access control
Special Order · Ships in 2-3 weeks

$294.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQD4-4F1

HES AQD4-4F1 Supervised Power Supply 12/24VDC 4A

Supervised 12/24VDC 4A power supply with four isolated fused channels
Special Order · Ships in 2-3 weeks

$262.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQD4-4F2

HES AQD4-4F2 Supervised Power Supply 12/24VDC

Supervised 12/24VDC power supply with 4-amp output for access control
Special Order · Ships in 2-3 weeks

$262.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
HES

SKU: AQD6

HES AQD6 Power Supply 6A 12/24VDC with Charger

6A regulated power supply with dual 12/24VDC output and integrated charger
In stock · Ships same business day

$255.99 $239.99 Save $16.00

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQD6B

HES AQD6B Power Supply Board 6A 12/24VDC Charger

Board-level 6A power supply with selectable 12/24VDC and battery charger
Special Order · Ships in 2-3 weeks

$180.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQL104

HES AQL104 10A 24V DC Power Supply Module

10A 24VDC module for access control power distribution
Special Order · Ships in 2-3 weeks

$262.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: AQL4

HES AQL4 4/3A Power Supply DV Module

Regulated 4/3A DV module for access control and door operators
Special Order · Ships in 2-3 weeks

$193.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: B-24-5

HES B-24-5 24VDC 5AMP Battery Backup Power Supply

24VDC 5AMP battery backup for access control systems during outages
Special Order · Ships in 2-3 weeks

$117.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: PSP-12

HES PSP-12 12VDC 700mA Plug-in Power Supply

Compact 12VDC 700mA plug-in supply for access control locks
Special Order · Ships in 2-3 weeks

$53.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: PSP-12-3

HES PSP-12-3 Regulated 12VDC 3A Switching Power Supply

12VDC 3A regulated wall-plug supply for distributed access control
Special Order · Ships in 2-3 weeks

$104.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: PSP-24

HES PSP-24 24VDC 350mA Plug-in Power Supply

24VDC 350mA plug-in supply for HES locks and security systems
Special Order · Ships in 2-3 weeks

$49.99

Add to Cart
The item has been added
Compare

Out of stock
HES

SKU: PSP-24-1.5

HES PSP-24-1.5 Regulated 12VDC Power Supply

12VDC regulated supply, 3A continuous for access control systems
Special Order · Ships in 2-3 weeks

$104.99

Add to Cart
The item has been added

Browse by Product Family

Click through to shop the families that fit your electrical & power deployment.

PoE Injectors & Midspan Units

Single and multi-port PoE injectors that deliver power and data over Ethernet to cameras and access points. Essential for retrofitting non-PoE infrastructure or expanding beyond switch capacity.

Power Supplies & Adapters

Industrial-grade AC/DC converters and 12V/24V regulated supplies for cameras, encoders, door controllers, and auxiliary equipment. Built for 24/7 operation and wide temperature ranges.

UPS & Battery Backup

Uninterruptible power supplies and battery modules designed to keep surveillance and access control systems operational during mains failure. Sized for edge recorders, NVRs, and networked devices.

Power Distribution & Surge Protection

Surge protectors, DIN-rail power distribution blocks, and protected outlets for sensitive surveillance electronics. Protect against voltage spikes and lightning-induced transients.

Cable & Connector Assemblies

Terminated power cables, barrel connectors, and DC pigtails pre-assembled for quick camera and device integration. Reduces field termination errors and speeds deployment.

What to Look For When Buying

The decisions that matter most before you spec.

PoE Budget Planning & Oversubscription Risk

PoE switches are frequently rated for more cameras than their actual power budget allows. Read PoE Budget Planning for IP Camera Deployments to understand injector and supply sizing before deployment. Undersizing power delivery is a leading cause of intermittent camera failures and system collapse under load.

Power Failure Cascades & System Downtime

When electrical infrastructure fails, entire surveillance zones go dark. Why Surveillance Systems Fail During Incidents documents how inadequate power conditioning and lack of UPS cause loss of footage during security events. Plan battery backup for NVRs, edge recorders, and access control hubs.

Cable Distance & Voltage Drop

PoE and DC power delivery degrade over distance; runs beyond 100 meters often require midspan injectors or stepped-up supplies. Verify cable gauge and run length before selecting power distribution topology to avoid under-voltage conditions at the camera.

Multi-Location Standardization

Why Surveillance Standards Collapse After the Third Location shows how power supply mismatches across sites create maintenance nightmares. Choose a consistent voltage (12V, 24V, or PoE) and supplier throughout your deployment to reduce spare parts inventory and service complexity.

Redundant & Managed Power Distribution

Enterprise deployments benefit from redundant power paths, monitored PDUs, and ring topologies that isolate failures. Higher-end Honeywell and i-PRO systems often integrate power monitoring; plan accordingly for large campuses or critical facilities.

Environmental & Temperature Ratings

Outdoor and harsh-environment installations demand industrial-grade supplies rated for extended temperature, humidity, and vibration. Confirm operating range and mean-time-between-failure (MTBF) specifications before deployment in uncontrolled spaces.

Technology Stack

The specs and acronyms that actually affect electrical & power performance.

Power over Ethernet (PoE)

Delivers power and data via Cat5e/6 cable to end devices, eliminating separate power runs. Standard PoE (15.4W) and PoE+ (30W) cover most IP cameras; PoE++ (60–90W) supports high-power PTZ and multi-sensor units. Budget for realistic camera counts per switch to avoid brownout conditions.

Volt & Amperage (12V DC, 24V AC/DC)

Most analog and IP camera supplies operate at 12V DC or 24V AC. Verify polarity and current draw (mA or A) to select the right supply gauge; undersized supplies cause brownout and intermittent operation. Industrial systems often standardize on 24V for longer cable runs with less voltage drop.

Uninterruptible Power Supply (UPS)

Provides instant switchover to battery during mains failure, keeping NVRs, access control panels, and network infrastructure online. Capacity is measured in VA (volt-amperes) and run-time minutes; size for critical equipment and desired hold-up duration (typically 15–60 minutes).

Surge Protection & Transient Voltage Suppression (TVS)

Clamps lightning and inductive load spikes to safe levels, preventing component damage. Essential on outdoor camera circuits and near HVAC, door motors, and panel relays. Look for devices with replaceable cartridges or indication lights.

DIN-Rail Power Distribution

Modular power supplies and distribution blocks mounted on standard 35mm rail for easy expansion and maintenance. Common in control rooms, server racks, and equipment shelters; simplifies wiring and reduces clutter.

Cable Gauge & Voltage Drop

Thicker wire (lower AWG) reduces resistance and voltage loss over distance. For 12V runs >30m or 24V runs >50m, use oversized cable or inject power mid-span. Poor power distribution cascades into storage and network failures.

Typical Deployment Scenarios

Campus with Distributed Cameras (50–100 units)

Deploy a central PoE+ switch (24–48 ports) in the server room backed by a 2kVA UPS, with midspan Geovision or Honeywell injectors at remote buildings. Use surge-protected DIN-rail distribution and a 10–15 minute UPS hold-up to ensure graceful shutdown during mains failure.

Retrofit with Mixed 12V & PoE Cameras

Combine PoE cameras (via switch injector) with legacy 12V dome cameras (fed by industrial 12V DC supply + surge protector). Standardize termination and cable routing to simplify future moves/adds/changes. Size supply at 1.5× total expected load to handle inrush current.

Remote Unmanned Site (10–15 cameras)

Use a compact PoE injector or managed PoE+ switch, protected by a DIN-rail surge module and a 500VA UPS with 30–45 minute battery runtime. Include a backup 4G cellular gateway powered by the same UPS to retain remote access if mains fails.

Access Control + Video Integration (multi-reader facility)

Deploy redundant 24V AC supplies for door controllers and readers, with a separate 12V DC power budget for IP intercoms. Size a 3–5kVA UPS with extended runtime to hold access and surveillance during emergencies; add battery monitoring to alert before depletion.

Top Brands for Electrical & Power

Click through to each brand for engineering profile and NDAA compliance status.

Honeywell

Authorized dealer · browse the full Honeywell catalog for this category

Geovision

Authorized dealer · browse the full Geovision catalog for this category

i-PRO

Authorized dealer · browse the full i-PRO catalog for this category

Axis

Authorized dealer · browse the full Axis catalog for this category

Hikvision

Authorized dealer · browse the full Hikvision catalog for this category

Frequently Asked Questions

How many cameras can one PoE switch really support?

Rated port count does not equal real-world capacity. A 24-port PoE+ switch (370W budget) typically supports 10–14 high-powered cameras, not 24. Learn why PoE switches fail before rated count and plan injectors or additional switches accordingly.

What size UPS do I need for my surveillance system?

Calculate total watts of all equipment (NVR, switch, access control, intercoms) and multiply by 1.2 for safety. A 1000W device requires a 1.2kVA UPS minimum. For 30–60 minute hold-up, add battery packs. Consult the UPS datasheet runtime table for your exact load.

Can I run cameras over long cable distances without power loss?

Beyond 100 meters, voltage drop becomes significant. Use thicker cable (e.g., 10/2 instead of 18/2) or deploy a midspan PoE injector at the halfway point. Test actual voltage at the camera before and during operation to confirm it meets the minimum 11.5V for PoE devices.

Should I use surge protection outdoors?

Yes. Outdoor camera runs, especially on poles or towers, attract lightning transients that destroy unprotected equipment. Install a surge-suppression cartridge or dedicated SPD (Surge Protective Device) at the camera supply entry point.

What's the difference between 12V and 24V supplies?

24V systems have lower current for the same power, so they suffer less voltage drop over distance and are preferred for long cable runs and industrial deployments. 12V is common in legacy and compact camera designs. Choose based on your camera specs, not preference; mixing standards requires careful supply sizing and testing.

How often should I test my UPS battery backup?

Test battery runtime (load test) at least quarterly, or annually if the UPS is older. Monitor battery age; most UPS batteries degrade after 3–5 years and should be replaced proactively. For critical facilities, use a monitored UPS with email alerts for battery health.

Related Categories

Adjacent equipment that typically ships alongside these products.

Mounting Brackets & Kits Installation Hardware & Kits Covers & Protection Software & Licenses Connectivity & Media Compliance & Site Essentials

Engineering Reading

Deep-dives from our engineering team on deployment planning.

Why Surveillance Systems Fail During Incidents Why Your NVR Can't Handle Its Rated Camera Count Why Surveillance Networks Collapse at the Core Why Large Surveillance Systems Fail: Storage Throughput Reality Why Surveillance Standards Collapse After the Third Location Why 4K Cameras Fail at Night Why Your PoE Switch Fails After 18 Cameras Frame Rate vs. Reality: When 30 FPS Makes Your System Worse