Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
STI
SKU: STI-7525
STI Protective Cabinet with Siren/Strobe Alarm, Thumb Lock
NEMA 4X protective cabinet with thumb lock and siren/strobe alarm
- Thumb lock access control with integrated siren and strobe alarm system
- NEMA 4X steel construction rated for indoor and outdoor environments
- Wall-mounted design for secure storage of access control equipment
$268.16 $267.99 Save $0.17The item has been added -
STI
SKU: STI-QT
STI Quickstop Fire Sprinkler Tool - STI-QT
- Stops water flow on ½" and ¾" sprinkler heads without shutting down the full system.
- Rated to 350 PSI (2400 kPa), compatible with standard municipal and commercial system pressures.
- Works on intact, damaged, sheared, and recessed heads — covers emergency and retrofit scenarios.
$162.86 $161.99 Save $0.87The item has been added -
STI
SKU: KIT-GFA-BB
STI Red Back Box for GF Series No Camera, w/2 - ½” NPT Plug
Red Back Box enclosure for STI GF Series, wall or recessed mount
- Designed for STI GF Series installs without camera, ensuring correct fit.
- Runs on 9VDC, aligning with standard access control power infrastructure.
- Includes two ½" NPT plugs to support conduit entry for wall or recessed mount.
$28.20 $27.99 Save $0.21The item has been added -
STI
SKU: KIT-71100A-R
STI Red Back Box Kit for Stopper® Station - KIT-71100A-R
- Mounts directly behind STI Stopper® Station panels for a clean wall installation.
- Operates at 9VDC, aligning with standard emergency station wiring protocols.
- Includes cable gaskets and spacer inserts to seal unused entries and protect wiring.
$21.04 $20.99 Save $0.05The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-M06540-CR
STI Red Replacement Housing for Universal - KIT-M06540-CR
- Direct mechanical fit for Universal Stopper locks and strikes — no rewiring required.
- Runs on 9VDC, matching existing strike circuits with no power supply upgrade needed.
- Red color-coding enforces zone identification across multi-door or multi-building installs.
$25.99The item has been added -
STI
SKU: KIT-08
STI Replacement Break-Glass Tool for Break Glass - KIT-08
- Drop-in replacement for Stopper II and Weather Stopper II frames; no new drilling required.
- Operates at 9VDC, matching existing Stopper series power architecture for seamless integration.
- Restores break-glass capability on installed housings without requiring full unit replacement.
$12.34 $11.99 Save $0.35The item has been added -
STI
SKU: KIT-18015-RC
STI Replacement Cable for STI-6200 STI-6205 and - KIT-18015-RC
- Direct replacement cable restores power continuity in STI-6200, STI-6205, and STI-6210 strikes.
- Rated 9VDC — matches native supply voltage of the STI-6200 series without reconfiguration.
- Drop-in fit eliminates access control system reprogramming after harness failure or damage.
$11.75 $10.99 Save $0.76The item has been added -
STI
SKU: KIT-10EM
STI Replacement glass for STI-4100EM & STI-4130EM - - KIT-10EM
- Drop-in fit for STI-4100EM and STI-4130EM eliminates reader replacement or rewiring.
- Matches 9VDC operating voltage of parent devices; no power supply changes required.
- Includes weather gasket and cable entry gaskets to maintain environmental protection.
$22.21 $21.99 Save $0.22The item has been added -
STI
SKU: KIT-7500-HTR
STI Replacement Heater for STI-7510 and STI-7511 series
Direct replacement heater for STI-7510 and STI-7511 locks
- 9VDC wired heating element for temperature-sensitive access control
- Integrates with TCP/IP and RS-232 control systems
- Wall-mount design for straightforward installation and replacement
$138.65 $137.99 Save $0.66The item has been added -
STI
SKU: KIT-7520-HTR
STI Replacement Heater Plate for STI-7520-HTR and - KIT-7520-HTR
- Replaces heater element in STI-7520-HTR and STI-7521-HTR strikes without full assembly swap.
- Operates at 9V DC, matching existing strike circuit power — no voltage conversion needed.
- Sealed plate geometry eliminates thermal dead zones that cause inconsistent latch engagement.
$180.95 $179.99 Save $0.96The item has been added -
STI
SKU: STI-6602
STI Replacement Horn Kit for STI-13000 Universal Stopper® series
Replacement horn for STI-13000 Universal Stopper electric strikes
- Drop-in retrofit horn kit operates at 9VDC for existing installations
- Compatible with STI-13000 series universal stopper door control systems
- Component-level replacement eliminates need for full system replacement
$64.02 $63.99 Save $0.03The item has been added -
STI
SKU: KIT-320
STI Replacement Wiring Harness for the Universal - KIT-320
- Rated 9V DC to match Universal Stopper series power specs, preventing intermittent lock cycles.
- TCP/IP-ready design integrates strike status and commands into network-based access control platforms.
- Purpose-built for Universal Stopper series, enabling harness swaps without full hardware replacement.
$44.42 $43.99 Save $0.43The item has been added -
STI
SKU: STI-3004
STI Rigid Conduit Gasket for Stopper II® (3/4" or - STI-3004
- Seals 1/2" and 3/4" rigid conduit entries on Stopper II strikes with one SKU.
- Rigid construction maintains seal integrity under vibration and thermal cycling.
- Blocks moisture ingress at conduit entry, preventing terminal corrosion in wet environments.
$8.46 $7.99 Save $0.47The item has been added -
STI
SKU: RP-GF2-11
STI RP-GF2-11 ReSet Call Point Flush Mount Green
Flush-mount call point reader with HID compatibility for secure door access
- Two-way communication for visitor requests at secured entry points
- Green housing with IP67 rating for indoor/outdoor door access applications
- Flush-mount design integrates seamlessly into walls at building entrances
$46.99The item has been added -
STI
SKU: STI-1284
STI Single Gang Mounting Adapter for STI-1219 and - STI-1284
- Mounts STI-1219 and STI-1229 hardware into a standard single gang electrical box.
- Eliminates custom drilling or oversized enclosures on retrofit and new-construction jobs.
- Operates at 9V DC, matching existing STI control and strike assembly wiring.
$21.39 $20.99 Save $0.40The item has been added -
STI
SKU: STI-8130
STI Smoke Detector Damage Stopper® with Conduit - STI-8130
- Polycarbonate shell blocks impact from tools and hardware during frame installation.
- Clear construction allows detector status verification without removing the stopper.
- No detector or frame modification required; mounts as a protective overlay with tamper-resistant fasteners.
$44.07 $43.99 Save $0.08The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.