Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
STI
SKU: KIT-06297A
STI Kit Package - "A" Spacer for STI-1210 and STI-1221A
Spacer kit for STI-1210 and STI-1221A electric strikes at 9VDC
- Aligns strikes on STI-1210 and STI-1221A models with 9VDC operation
- Accommodates variable door frame depths in HID credential access systems
- Wall-mount spacer assembly for proper strike positioning during installation
$51.09 $50.99 Save $0.10The item has been added -
STI
SKU: KIT-06297B
STI Kit Package - "B" Spacer for STI-1210B and - KIT-06297B
- Corrects frame-to-strike gaps on STI-1210B and STI-1221B retrofit installations.
- Ensures reliable HID credential reader alignment when non-standard frame geometry is present.
- Requires 9VDC at strike and 7mm fixing holes; wall fixings included for direct frame mounting.
$40.87 $39.99 Save $0.88The item has been added -
STI
SKU: KIT-06297C
STI Kit Package - "C" Spacer for STI-1210C and STI-1221C
Alignment spacer for STI-1210C and STI-1221C electric strikes
- Corrects frame-to-strike spacing on STI-1210C and STI-1221C to prevent latch binding.
- Supports 9VDC electric strike installations in retrofit and new-build commercial door frames.
- Includes wall fixings and cable entry inserts; mounts using standard 7mm masonry drill pattern.
$35.75 $34.99 Save $0.76The item has been added -
STI
SKU: KIT-06297E
STI Kit Package - "E" Spacer for STI-1210E and STI-1221E
Spacer kit for STI-1210E and STI-1221E door frame alignment with HID readers
- Ensures proper strike engagement on STI-1210E and STI-1221E 9VDC locks
- Corrects door frame fit across varied installation depths and configurations
- Supports HID credential reader integration in access control systems
$31.94 $30.99 Save $0.95The item has been added -
STI
SKU: KIT-06297F
STI KIT-06297F Lock/Strike Accessory Kit - F Spacer
F Spacer kit for HID lock/strike systems at 9VDC
- F-series spacer corrects gap alignment between strike plate and door frame at install.
- Designed for HID credential environments; operates at 9VDC for low-voltage door hardware.
- Includes wall fixings, anchors, and cable entry inserts for clean surface-mount deployment.
$40.87 $39.99 Save $0.88The item has been added -
STI
SKU: KIT-10
STI KIT-10 Replacement Glass for STI-4100
- Direct replacement glass for STI-4100 strike systems restores full operation fast.
- Operates at 9VDC, matching existing STI-4100 power supply without rewiring.
- Maintains access control integrity with a manufacturer-warranted OEM component.
$12.22 $11.99 Save $0.23The item has been added -
STI
SKU: KIT-10-FR
STI KIT-10-FR Replacement Glass for STI-4100-FR
Replacement glass for STI-4100-FR 10-door access control system
- Supports up to 10 doors with 9VDC wired power and RS-232 communication
- Direct compatibility with STI-4100-FR lock and strike hardware
- Maintenance replacement component for multi-door facility deployments
$22.21 $21.99 Save $0.22The item has been added -
STI
SKU: KIT-102722-B
STI KIT-102722-B 5/8" Spacer for Stopper® Stations
5/8" spacer for STI Stopper® stations with 9VDC lock/strike
- Precise 5/8" spacing for proper alignment in Stopper® installations
- Compatible with 9VDC lock/strike mechanisms on Stopper® stations
- Wall-mount accessory for credential reader and door strike assembly
$11.28 $10.99 Save $0.29The item has been added -
STI
SKU: KIT-102722-E
STI KIT-102722-E 5/8" Spacer for Stopper® Stations
- Maintains precise frame-to-strike air gap for reliable engagement in 9VDC Stopper® systems.
- Compatible with Stopper® Station and Stopper II assemblies for new installs and retrofits.
- Blank-off inserts seal unused cable entries, preventing moisture ingress in wet environments.
$11.28 $10.99 Save $0.29The item has been added -
STI
SKU: KIT-102722-G
STI KIT-102722-G 5/8" Spacer for Stopper® Stations
- Provides 5/8" standoff to ensure correct gasket seating on uneven wall surfaces.
- Supports both indoor and outdoor Stopper/Stopper II station surface installations.
- Positions frame before gasket and cable entry hardware for clean, secure cable routing.
$11.28 $10.99 Save $0.29The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-102722-R
STI KIT-102722-R 5/8" Spacer for Stopper® Stations
5/8" spacer for Stopper® 9VDC strike alignment on recessed walls
- Maintains consistent standoff distance for proper lock/strike engagement
- Compensates for varying wall depths in drywall, masonry, and composite
- Drop-in retrofit solution for emergency notification station installations
$11.28 $10.99 Save $0.29The item has been added -
STI
SKU: KIT-102722-W
STI KIT-102722-W 5/8" Spacer for Stopper® Stations
- Corrects strike-to-frame misalignment on Stopper® stations with a precise 5/8" offset.
- Passive mechanical component — adds zero power draw to existing 9VDC Stopper® systems.
- Fits existing fastener pattern; no new drilling required for surface-mount or recessed installs.
$11.28 $10.99 Save $0.29The item has been added -
STI
SKU: KIT-102722-Y
STI KIT-102722-Y 5/8" Spacer for Stopper® Stations
- 5/8" offset corrects frame alignment on surface-mount installs needing cable clearance.
- Compatible with STI-1100, 1130, 1200, 1230, 1250, 3150, and Weather Stopper II models.
- Seats gasket and cable entry inserts flush to maintain weather integrity outdoors.
$11.28 $10.99 Save $0.29The item has been added -
STI
SKU: KIT-314
STI KIT-314 Adapter Plate for HID Credentials
HID adapter plate for STI lock/strike hardware integration
- Integrates HID credential readers with existing STI assemblies
- Operates at 9VDC for standard access control power supply
- Wall-mount adapter plate eliminates controller redesign needs
$27.29 $26.99 Save $0.30The item has been added -
STI
SKU: KIT-318
STI KIT-318 Adapter Plate
- Eliminates custom fabrication by providing a standardized mounting interface for electronic strikes.
- Operates at 9VDC, aligning with standard strike circuit power provisioning in access control systems.
- Simplifies multi-door deployments by standardizing strike installation across varied frame geometries.
$22.99The item has been added -
Add to Cart The item has been addedSTI
SKU: KIT-319
STI KIT-319 Replacement Wiring Harness for Universal Stopper Series
Replacement harness for STI Universal Stopper Series at 9VDC
- Direct fit for STI Universal Stopper electric strikes, no adapters
- 9VDC operation integrates with existing access control power rails
- HID credential system compatible for enterprise reader environments
$44.42 $43.99 Save $0.43The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.