IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Axis

SKU: 5505-271

Axis 5505-271 Connector A 6-Pin 2.5 Straight

6-pin 2.5mm straight connector, pack of 10 for Axis devices
- 6-pin 2.5mm straight design for reliable camera and access control connections
- IP65-rated construction withstands moisture and dust in outdoor installations
- Pack of 10 connectors reduces cost per unit for multi-device deployments
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-261

Axis Connector A 2-Pin 2.5 Straight 10 pcs

2-Pin 2.5mm straight connectors for Axis surveillance systems (10-pack)
- 2-pin 2.5mm male connectors with straight form factor for legacy Axis cameras
- IP65-rated housing supports microphone connections in surveillance deployments
- Bulk 10-piece pack for replacement, repair, and system expansion needs
In stock · Ships same business day

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-111

Axis F8212 Trim Ring 10 pcs - 5507-111

Flush-mount trim rings for 4 Axis camera models, 10-pack
- Compatible with F1005-E, F1035-E, P1214-E, and P1224-E cameras
- Discreet ceiling and wall installation with minimal visual footprint
- 10 trim rings per pack for multi-location deployments
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01960-001

Axis M12 6mm F1.9 Fixed Lens 4 pcs - 01960-001

M12 6mm F1.9 fixed lens, 4-pack for Axis network cameras
- 6mm fixed focal length with F1.9 aperture for detailed area monitoring
- M12 form factor integrates directly with Axis network camera platforms
- Four-lens set captures clear images in low-light conditions without extra illumination
Special Order · Ships in 2-3 weeks

$91.74 $88.99 Save $2.75

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02818-001

Axis TM3211 Recessed Mount Accessory - 02818-001

Recessed ceiling mount for discrete Axis camera installations
- Flush-mount design conceals hardware while maintaining full surveillance coverage
- Compatible with standard Axis camera models across corporate and retail spaces
- Durable construction minimizes vibration for stable, consistent video performance
Special Order · Ships in 2-3 weeks

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02547-001

Axis TP3906 Camera Microphone Kit - 02547-001

Audio input microphone kit for AXIS P32 series network cameras
- Microphone with connection cables captures clear indoor surveillance sound
- Compatible with AXIS P32 series cameras for direct integration
- Installation guide and all components included for quick setup
Special Order · Ships in 2-3 weeks

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02336-001

Axis TQ1601-E Conduit Back Box - 02336-001

IP66/IP67 conduit back box with IK10 impact rating for outdoor camera installations
- IP66/IP67 rated aluminum enclosure protects connections from rain, spray, and dust
- IK10 impact resistance withstands 20-joule strikes without cracking or deforming
- Three cable entry points (rear hole + M25 side/bottom ports) for flexible routing
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02411-001

Axis TQ5001-E Wall and Pole Mount - 02411-001

Rugged wall/pole mount for Axis PTZ cameras, IP66/NEMA 4X rated
- Supports 40 kg load with IP66, NEMA 4X, and IK10 impact protection
- Operates -50°C to 65°C with aluminum construction and white finish
- Compatible with Axis P55, P56, Q37, Q60, and Q61 series cameras
Special Order · Ships in 2-3 weeks

$184.53 $178.99 Save $5.54

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBO-147B

Hanwha SBO-147B Waterproof Aluminum Back Box

IP67/IK10 aluminum back box for Hanwha cameras in harsh outdoor
- IP67 waterproof + IK10 vandal-rated aluminum resists rain, dust, impact
- Operates -50°C to 50°C; lightweight (0.9 kg) with wall or ceiling mount
- Purpose-built for Hanwha X, Q, P, and Wisenet IP camera lines
In stock · Ships same business day

$75.00 $50.99 Save $24.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CMP-JB

Hikvision CMP-JB Corner Mounting Bracket for Speed Dome

Corner mount bracket for speed domes—22 lb capacity, aluminum/steel build
- 22 lb load capacity handles mid to full-size speed dome cameras smoothly
- Aluminum alloy and steel construction resists sagging during months of PTZ use
- Works with JPB-WL junction box for internal cable routing and clean appearance
In stock · Ships same business day

$78.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC135H

Hikvision PC135H Pendant Cap for Dome Camera

Aluminum pendant cap for Hikvision dome cameras, white finish
- Aluminum alloy construction resists corrosion in indoor/outdoor settings
- Spray-treated surface prevents oxidation and maintains professional appearance
- Direct mechanical compatibility with Hikvision dome cameras, no adapters needed
In stock · Ships same business day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501S-W

i-PRO WV-QSR501S-W Wall Mount Bracket for Dome Cameras

White wall bracket for i-PRO dome cameras, 4-screw pattern
- Four-point fastening distributes load evenly, reduces stress on anchors
- Standard mounting pattern works across i-PRO dome camera lineup
- Powder-coat white finish for indoor and sheltered outdoor use
In stock · Ships same business day

$170.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AM-71F

Vivotek AM-71F Indoor Conduit Box

Compact indoor conduit box with PF 1/2" thread for organized cable routing
- Polycarbonate construction protects connectors and wiring in office and retail setups
- Ø 110 x 41 mm low-profile design blends discreetly into professional environments
- PF 1/2" pipe thread integrates with standard conduit systems for easy installation
Special Order · Ships in 2-3 weeks

$21.60 $19.99 Save $1.61

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-921

Axis F7308 RJ12 Cable 8m Black 4 pcs - 5506-921

4-pack RJ12 cables, 8m each, for AXIS F1004 sensor units
- 8-meter (26 ft.) reach per cable for extended installation distances
- RJ12 connectors for secure connections to F1004 sensor units
- Four cables per package for system scaling and spare inventory
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02361-001

Axis F91 DIN Rail Mounting Clip - 02361-001

35mm DIN rail clip for compact AXIS F91 panel mounting
- Mounts F91 main units short-side-forward to standard DIN rail
- Cable routing in three directions—up, down, or outward from rail
- Includes angled bracket option for flexible installation geometry
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02213-001

Axis TF1801-R Lens Hood 4-Pack - 02213-001

4-pack silicone lens hoods for Axis F2105-RE and F2135-RE sensors
- Anti-glare protection reduces reflections and light interference in surveillance
- Silicone construction withstands harsh outdoor weather and environmental exposure
- Custom fit for F2105-RE and F2135-RE units; 4.3" diameter x 2.0" depth
Special Order · Ships in 2-3 weeks

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis 5505-271 Connector A 6-Pin 2.5 Straight

Axis Connector A 2-Pin 2.5 Straight 10 pcs

Axis F8212 Trim Ring 10 pcs - 5507-111

Axis M12 6mm F1.9 Fixed Lens 4 pcs - 01960-001

Axis TM3211 Recessed Mount Accessory - 02818-001

Axis TP3906 Camera Microphone Kit - 02547-001

Axis TQ1601-E Conduit Back Box - 02336-001

Axis TQ5001-E Wall and Pole Mount - 02411-001

Hanwha SBO-147B Waterproof Aluminum Back Box

Hikvision CMP-JB Corner Mounting Bracket for Speed Dome

Hikvision PC135H Pendant Cap for Dome Camera

i-PRO WV-QSR501S-W Wall Mount Bracket for Dome Cameras

Vivotek AM-71F Indoor Conduit Box

Axis F7308 RJ12 Cable 8m Black 4 pcs - 5506-921

Axis F91 DIN Rail Mounting Clip - 02361-001

Axis TF1801-R Lens Hood 4-Pack - 02213-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading