IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Comelit

SKU: UT9199

Comelit UT9199 Rainshield Surface-Mounted Wall Housing

Weather-resistant 4MP wall housing with PoE+ for outdoor IP cameras
- 4MP resolution with PoE+ (802.3at) power over single Ethernet run
- Surface-mounted white enclosure rated for outdoor weather protection
- Compatible with standard compact IP cameras; no conduit needed
Special Order · Ships in 2-3 weeks

$380.99 $364.99 Save $16.00

Add to Cart
The item has been added
Compare

Out of stock
Comnet

SKU: PS12DC-1A-US

Comnet PS12DC-1A-US 12VDC Power Supply

12VDC 1A industrial power supply for IP cameras and surveillance
- 12VDC 1A output with universal 100–240VAC input, single connector
- Operates across industrial temperature range for outdoor deployments
- Compact 1.1 × 1.1 × 1.1 in form factor under 1 kg
Special Order · Ships in 2-3 weeks

$36.00 $23.99 Save $12.01

Add to Cart
The item has been added
Compare

Out of stock
Comnet

SKU: PS12DC3A

Comnet PS12DC3A Power Supply

12V DC 3A DIN rail power supply for network infrastructure
- 12V DC output at 3A supports distributed network equipment in compact panel spaces
- DIN rail mount integrates directly with switches and telecom infrastructure
- Industrial-grade construction for remote sites and security system deployments
Special Order · Ships in 2-3 weeks

$55.99

Add to Cart
The item has been added
Compare

Out of stock
Comnet

SKU: PS48V-.84A

Comnet PS48V-.84A 48V Power Supply

48V DC power supply for Comnet network switches and surveillance gear
- 40.3W output at 48V / 0.84A supports switches, fiber converters, modules
- Industry-standard DC connector integrates with Comnet infrastructure deployments
- Compact 1 lb form factor fits security, telecom, and IP surveillance setups
Special Order · Ships in 2-3 weeks

$146.99

Add to Cart
The item has been added
Compare

Out of stock
Comnet

SKU: PS48V-1.25A

Comnet PS48V-1.25A Industrial Power Supply

48V industrial power supply for distributed network infrastructure
- 1.25A output rated for industrial operating temperatures
- Compact 5.7" × 2.36" × 1.26" form factor under 0.5kg
- Compatible with Comnet managed and unmanaged network equipment
Special Order · Ships in 2-3 weeks

$283.00 $186.99 Save $96.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170700-000

Cradlepoint 170700-000 COR Extensibility Dock

Modular dock expands COR routers with 2 modem slots and GPIO I/O
- 2x modem expansion slots for MC400 modems plus GPS support when paired
- Add 2x 10/100 Ethernet ports for discrete WAN, LAN, or failover routing
- 2x10 GPIO connectors support sensors, ignition detection, and 5V power output
In stock · Ships same business day

$192.99 $184.99 Save $8.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170717-000

Cradlepoint 170717-000 12V DC Power Supply

12V DC power supply with 2x2 Molex for Cradlepoint routers
- 12V DC output with 2x2 4-pin Molex connector for direct appliance integration
- Compact form factor fits tight equipment racks and wall-mounted enclosures
- Field-replaceable design enables quick swap-out in remote site deployments
In stock · Ships same business day

$24.99 $23.99 Save $1.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170718-000

Cradlepoint 170718-000 Magnetic Mount Kit for IBR900

Magnetic mount kit for IBR900 mobile broadband router deployments
- Magnetic mounting hardware for quick repositioning without permanent installation
- Compatible with IBR900, IBR600C, IBR650C, and COR Extensibility Dock
- Ideal for vehicle, temporary structure, and outdoor field installations
In stock · Ships same business day

$14.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170750-001

Cradlepoint 170750-001 Rack-Mount Bracket Kit with 2-Wing

19" rack-mount bracket kit with dual wings for Cradlepoint routers
- Dual-wing design stabilizes equipment in standard EIA-310 racks
- Includes bracket assembly, 2-wing extensions, and all mounting hardware
- Compatible with IBR1700 and R2400 routing appliances
In stock · Ships same business day

$38.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170863-000

Cradlepoint 170863-000 12V DC Power Supply Barrel Connector

12V DC barrel connector replacement for Cradlepoint routers
- 12V DC output with barrel connector for direct swap into compatible models
- Desktop wall-mount form factor fits remote offices and field deployments
- Spare unit on hand eliminates downtime from failed primary adapter
In stock · Ships same business day

$28.99 $27.99 Save $1.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170869-000

Cradlepoint 170869-000 12V 5.5A Power Supply

12V 5.5A power supply for Cradlepoint C7 gear, −30°C to 70°C
- 12V DC output with 5.5A max current via 2x2 4-pin Molex connector
- Wide operating range −30°C to 70°C handles arctic to tropical sites
- Compact form factor fits standard DIN rails and enclosed equipment racks
In stock · Ships same business day

$43.99 $41.99 Save $2.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170871-000

Cradlepoint 170871-000 GPIO Cable Assembly

Industrial GPIO cable for DIN rail Cradlepoint deployments
- 2x2 small form factor GPIO cable for secure signal transmission
- Black construction built for high-density industrial installations
- Compatible with Cradlepoint wireless routing and edge computing platforms
In stock · Ships same business day

$19.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170873-000

Cradlepoint 170873-000 USB to RS-232 Serial Cable

USB to RS-232 serial cable for Cradlepoint routers and legacy devices
- USB Type-A male to DB9 female connector for direct serial device integration
- 1.3-foot cable length fits compact rack and wall-mounted installations
- No external power required; draws power directly from router USB port
In stock · Ships same business day

$72.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170905-000

Cradlepoint 170905-000 Vehicle Mounting Foam

Vibration-dampening foam for secure Cradlepoint router mounting in vehicles
- Absorbs road vibration and mechanical shock to protect equipment and connectors
- Stabilizes antenna position during acceleration, braking, and rough terrain operation
- Open-cell design allows airflow around mounted routers in confined vehicle spaces
In stock · Ships same business day

$38.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170585-001

Cradlepoint Inc 170585-001 GPIO Cable 3M 22AWG Black

3M GPIO cable with 22AWG for Cradlepoint router control signals
- 3-meter length supports remote sensor, alarm, and status signaling
- 22AWG conductor gauge ensures reliable signal transmission over distance
- Compatible with IBR200, IBR600, IBR900, IBR1100, IBR1700 routers
In stock · Ships same business day

$13.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170623-002

Cradlepoint Inc 170623-002 Power Cable 250V C7 1.8M

European C7 power cable, 250V, 1.8m for Cradlepoint routers
- C7 figure-8 connector with Europe Type C wall plug for regional compatibility
- 250V AC rated cable spans 1.8 meters (5.9 ft) for flexible device placement
- Replacement cord for Cradlepoint 12V power supply units and compatible devices
In stock · Ships same business day

$12.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Comelit UT9199 Rainshield Surface-Mounted Wall Housing

Comnet PS12DC-1A-US 12VDC Power Supply

Comnet PS12DC3A Power Supply

Comnet PS48V-.84A 48V Power Supply

Comnet PS48V-1.25A Industrial Power Supply

Cradlepoint 170700-000 COR Extensibility Dock

Cradlepoint 170717-000 12V DC Power Supply

Cradlepoint 170718-000 Magnetic Mount Kit for IBR900

Cradlepoint 170750-001 Rack-Mount Bracket Kit with 2-Wing

Cradlepoint 170863-000 12V DC Power Supply Barrel Connector

Cradlepoint 170869-000 12V 5.5A Power Supply

Cradlepoint 170871-000 GPIO Cable Assembly

Cradlepoint 170873-000 USB to RS-232 Serial Cable

Cradlepoint 170905-000 Vehicle Mounting Foam

Cradlepoint Inc 170585-001 GPIO Cable 3M 22AWG Black

Cradlepoint Inc 170623-002 Power Cable 250V C7 1.8M

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading