Cradlepoint 170717-000 12V DC Power Supply
Overview
The Cradlepoint 170717-000 is a 12V DC power supply purpose-built to deliver stable power to Cradlepoint network appliances and edge compute systems. The compact form factor with a 2x2 4-pin Molex connector makes it well-suited for space-constrained installations and OEM integration scenarios where internal DC rail connectivity is preferred over external barrel connectors. This supply is commonly deployed in branch office routers, remote site gateways, and field-installed edge devices that require reliable 12V input.
Key Features
- 12V DC Output: Delivers consistent 12V to Cradlepoint routers and industrial networking appliances, eliminating the need for external voltage regulation and reducing single points of failure in remote deployments.
- 2x2 4-pin Molex Connector: Standard 2x2 Molex pin configuration ensures direct integration into Cradlepoint appliance power rails; no adapter needed, reducing assembly complexity and cost in OEM builds or field replacements.
- Compact Form Factor: Minimal footprint means it fits into tight equipment racks, cabinet spaces, and wall-mounted gateway enclosures without adding bulk or requiring external shelf space.
- Designed for Industrial Environments: Built to support Cradlepoint's edge routing and industrial gateway lineup, where consistent uptime and power stability are critical to branch and remote site connectivity.
- Field-Replaceable Design: Standard Molex connector allows quick swap-out in the field without special tools or reconfiguration; reduces MTTR when power supply fails.
Integration & Compatibility
The 170717-000 is specified as compatible with Cradlepoint routers, gateways, and industrial networking equipment that accept 12V DC input via Molex connectivity. Before ordering, verify that your specific Cradlepoint model accepts a 2x2 4-pin Molex input. If your deployment uses a different Cradlepoint appliance or requires a different connector type (such as barrel jack or terminal block), contact the manufacturer or your integrator to confirm compatibility. This supply is intended for OEM and integrator use; standard end-user deployments may rely on included power supplies bundled with the primary appliance.
Deployment Scenarios
Security integrators and IT architects deploying Cradlepoint solutions in branch offices, remote warehouses, and field sites will find the 170717-000 useful as a replacement supply or in redundant power configurations where dual 12V feeds improve uptime. Industrial automation and warehouse environments benefit from the compact design and Molex connector standardization, which simplifies logistics and reduces connector-related failures. Telecom professionals commissioning edge routers in outdoor or environmentally challenging sites can rely on this supply as a stable internal power source within larger power distribution schemes.
Selection Considerations
Verify the exact power draw (in watts) of your target Cradlepoint appliance before confirming the 170717-000 supply is adequate; undersizing the supply will cause voltage droop under load. Confirm that the 2x2 Molex connector matches your device's internal power input; if your Cradlepoint appliance uses a different connector or expects AC input, this DC supply will not work. If you require redundant or backup 12V power supplies for higher availability, plan for a secondary 170717-000 and a power management board or relay logic to handle failover.
Frequently Asked Questions
Q: Is the Cradlepoint 170717-000 compatible with all Cradlepoint routers?
A: No. The 170717-000 is designed for Cradlepoint appliances that accept 12V DC input via a 2x2 4-pin Molex connector. Not all Cradlepoint models use this connector type. Verify your appliance specifications before ordering.
Q: Can I use the 170717-000 to power multiple Cradlepoint devices simultaneously?
A: Only if the combined power draw of all devices does not exceed the supply's rated output capacity. Check the wattage specification of each device and the supply's maximum output to confirm. Running multiple high-draw appliances on a single supply may cause voltage sag or thermal shutdown.
Q: What is the maximum output current of the 170717-000?
A: Maximum current specification is not documented in the available sources. Contact Cradlepoint directly or your specialty distributor for current rating and maximum load capacity.
Q: Is the Cradlepoint 170717-000 redundancy-rated for failover scenarios?
A: The supply itself does not include built-in failover logic. For redundant power configurations, you will need external power management circuitry (diode OR logic, relay switchover, or a UPS controller) to handle automatic switching between primary and backup supplies.
Q: Can I replace an original Cradlepoint power supply with the 170717-000?
A: Only if your original Cradlepoint device is designed to accept 12V DC via a 2x2 4-pin Molex connector. If your appliance came with a different supply type (AC barrel jack, terminal block, or another connector), the 170717-000 will not be compatible.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Cradlepoint 170717-000 is a straightforward 12V DC power supply built around a standard 2x2 4-pin Molex connector. It's not feature-rich, and that's intentional—this is an OEM and integrator part designed to live inside equipment racks or appliance enclosures, not sit on a desktop. The critical gotcha is compatibility: you must verify that your specific Cradlepoint model uses a 2x2 Molex input rail. If it accepts AC input or a different DC connector, the 170717-000 won't work.
Technical Highlights:
- 12V DC Output: Stable voltage delivery to edge routers and industrial gateways reduces supply-side brownouts that can corrupt flash memory or cause unexpected reboots during cellular handoffs.
- 2x2 4-pin Molex Connector: Industry-standard connector means no proprietary cabling; replacement or redundant supplies are easy to source and swap in the field without custom adapters.
- Compact Form Factor: Minimal size is a real asset when integrating power supplies into tight gateway cabinets or DIN-rail mounted systems—you won't need extra shelf space or external mounting.
Deployment Considerations:
- Do not assume plug-and-play compatibility. Cradlepoint's product line includes routers with different power inputs (AC barrel jacks, terminal blocks, internal 12V rails). Verify the appliance datasheet or pinout before ordering.
- If you're designing a redundant power scheme, remember that the 170717-000 itself has no failover relay or diode logic built in. You'll need external OR logic or a power management board to handle automatic switchover.
- Maximum output current (in amps) is not specified in the available documentation. Request that from Cradlepoint or your distributor if you're powering high-draw appliances or multiple daisy-chained devices.
The 170717-000 is the right choice for field integrators stocking replacement supplies for Cradlepoint edge routers deployed in remote branches and warehouse automation sites. It's not a universal power supply—it's a precision-fit part for a specific connector type—so confirmation before purchase is non-negotiable.
