IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Comelit

SKU: 1456B/SE200

Comelit 1456B/SE200 VIP 200 Slave Lifetime License

Lifetime license expands VIP intercoms to 200 slave stations
- Supports up to 200 slave stations on Comelit VIP systems
- Lifetime license with no recurring subscription or renewal fees
- Activates through VIP system controller during commissioning
Special Order · Ships in 2-3 weeks

$5,588.99 $5,345.99 Save $243.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 1456B/TE100

Comelit 1456B/TE100 VIP 100 Telephone Lifetime License

Lifetime license for 100 telephone extensions on Comelit VIP systems
- 100 telephone extensions across enterprise, multi-tenant, or campus deployments
- Permanent license—no renewal fees or recurring costs after purchase
- Integrates with Comelit VIP intercom platforms and compatible PBX networks
Special Order · Ships in 2-3 weeks

$891.99 $852.99 Save $39.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 1456S

Comelit 1456S VIP Gateway Slave Rack Mount

Slave gateway node for Comelit VIP systems, rack-mounted with PoE power
- PoE (802.3af) powered—no dedicated power cabling needed in network racks
- Rack-mount form factor integrates into centralized security system deployments
- Secondary gateway node expands Comelit VIP intercom and access control capacity
Special Order · Ships in 2-3 weeks

$463.99 $443.99 Save $20.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 1596B

Comelit 1596B 33Vdc Power Supply for 316 Series

33Vdc auxiliary supply for Comelit 316 series intercoms
- Regulated 33Vdc output for 316 series entrance stations
- Wall-mounted enclosure with screw terminal connections
- Designed for residential and light commercial installations
Special Order · Ships in 2-3 weeks

$183.99 $175.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 3110/1A

Comelit 3110/1A Ikall Flush Mounting Box

Flush-mount single-module box for Comelit Ikall intercom systems
- Rack-based mounting integrates one Ikall module into wall installations
- White housing designed for indoor residential and commercial deployments
- Permanent in-wall mounting supports distributed or centralized configurations
Special Order · Ships in 2-3 weeks

$8.99

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 3110/2A

Comelit 3110/2A Flush Mounting Box for 2 Module

Flush wall box for 2-module Comelit Ikall intercom systems
- Flush mounting design fits seamlessly in-wall for new and retrofit installations
- Holds up to 2 intercom modules within the Ikall platform
- White protective enclosure houses and secures modular components
Special Order · Ships in 2-3 weeks

$9.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: 3110/3A

Comelit 3110/3A Flush-Mounted Box 3 Modules

3-module flush box with IP65 weatherproof and IK08 vandal resistance
- IP65 rated for protected outdoor and indoor wall installations
- IK08 vandal-resistant housing withstands intentional physical impact
- Night vision and microphone support for full audio communication
In stock · Ships same business day

$13.58 $9.99 Save $3.59

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 31163

Comelit 31163 Rain Shield Surface Mount Box 3-Module

Surface mount rain shield for Comelit 3-module systems
- Protects outdoor installations from direct water exposure and environmental contamination
- White box design mounts surface-mounted for easy access during service
- Sized 6.06" W × 13.07" H × 3.35" D for compact module housing
Special Order · Ships in 2-3 weeks

$215.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: 3460/6

Comelit 3460/6 Flush Mount Box for 5-6 Button

Recessed wall box for 5-6 button Comelit intercom modules
- Flush mount design hides wiring and conduit for clean wall surfaces
- Fits recessed wall and column installations in residential/commercial spaces
- Code-compliant fitment sized for Comelit 5-6 button control modules
In stock · Ships same business day

$180.80 $122.99 Save $57.81

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 3461

Comelit 3461 Surface Mount Box for AOR and Help

Surface mount box for Comelit AOR and Help emergency systems
- Wall-mounted enclosure fits retrofit and new construction installations
- Secure housing designed for AOR and Help system component integration
- Compact 6.92" × 8.92" × 2.23" white box simplifies indoor deployment
Special Order · Ships in 2-3 weeks

$100.99

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 3462/6

Comelit 3462/6 Surface Mount Box for 5-6 Button

Surface mount box for 5-6 button Comelit intercom panels
- Plastic enclosure mounts flush to indoor walls for clean integration
- Accommodates 5-6 button panel configurations in Comelit systems
- White housing blends into residential and commercial installations
Special Order · Ships in 2-3 weeks

$192.99

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 3525

Comelit 3525 Visto Angle Bracket

Wall-mount angle bracket for Comelit 3525 Visto intercoms
- Left and right configurations for flexible directional positioning
- White finish bracket supports angled or standard wall installation
- Compact design fits residential and light commercial deployments
Special Order · Ships in 2-3 weeks

$17.99

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 3526

Comelit 3526 Visto Angle Bracket Up/Down

Vertical angle bracket for Comelit Visto S intercom systems
- Up/down positioning adjusts camera or monitor alignment to suit installation
- Works with wall-mounted and recessed Comelit Visto S configurations
- Lightweight bracket accessory in white for standard mounting setups
Special Order · Ships in 2-3 weeks

$17.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: 4792

Comelit 4792 Rain Shield for Quadra Entrance

Weatherproof rain shield for Comelit Quadra entrance systems
- Deflects precipitation and moisture away from panel face
- Mounts to existing Quadra units without reconfiguration required
- White housing, 5.6 x 4.8 x 1.1 in, rated for outdoor environments
In stock · Ships same business day

$64.58 $6.99 Save $57.59

Add to Cart
The item has been added
Compare

Out of stock
Comelit

SKU: 4793MA

Comelit 4793MA Aluminium Faceplate for Quadra W/Buttons

Aluminium faceplate replacement for Comelit Quadra intercom systems
- Integrated button controls for wall-mounted indoor installations
- Durable aluminium construction designed for Quadra series compatibility
- Professional appearance suitable for residential and commercial settings
Special Order · Ships in 2-3 weeks

$193.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Comelit

SKU: 4888CU

Comelit 4888CU Mixer & Power Supply for Simplebus CSA

Centralized mixer & power supply for Simplebus CSA audio distribution
- Combines audio mixing and power distribution in single chassis for simplified wiring
- Purpose-built for Comelit Simplebus CSA ecosystem with native signal integrity
- Reduces installation complexity across multi-zone residential and commercial deployments
In stock · Ships same business day

$619.14 $296.99 Save $322.15

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Comelit 1456B/SE200 VIP 200 Slave Lifetime License

Comelit 1456B/TE100 VIP 100 Telephone Lifetime License

Comelit 1456S VIP Gateway Slave Rack Mount

Comelit 1596B 33Vdc Power Supply for 316 Series

Comelit 3110/1A Ikall Flush Mounting Box

Comelit 3110/2A Flush Mounting Box for 2 Module

Comelit 3110/3A Flush-Mounted Box 3 Modules

Comelit 31163 Rain Shield Surface Mount Box 3-Module

Comelit 3460/6 Flush Mount Box for 5-6 Button

Comelit 3461 Surface Mount Box for AOR and Help

Comelit 3462/6 Surface Mount Box for 5-6 Button

Comelit 3525 Visto Angle Bracket

Comelit 3526 Visto Angle Bracket Up/Down

Comelit 4792 Rain Shield for Quadra Entrance

Comelit 4793MA Aluminium Faceplate for Quadra W/Buttons

Comelit 4888CU Mixer & Power Supply for Simplebus CSA

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading